Drywall Repair cost at a glance
- Typical range: $300 – $900
- Most homeowners pay: around $600
- Per square foot: $50–$75 per sq ft
- Prices vary most by: Labor (50–70% of the budget)
Cross-checked against three published sources for this project. Sources used for this page: the Angi drywall repair cost guide, HomeGuide's drywall repair cost guide and Homewyse's drywall repair cost data (as published in 2026 contractor cost guides). Sources last checked: October 2026 — HomeGuide, Angi, Homewyse. How we calculate these costs
Cost by scope

| Scope | Typical cost | What it includes |
|---|---|---|
| Small hole or crack patch | $300 – $500 | The entry job: a doorknob hole, a furniture puncture or a short crack, patched and sanded in one visit. HomeGuide prices a small hole at $300–$500 professionally, and Angi's repair-type table runs small holes at $20–$120 for the patch itself — the gap between those numbers is the minimum visit charge in the next tier. |
| Standard repair visit | $300 – $900 | The typical project on this page. Angi averages $613 across 36,945 verified projects with most homeowners paying $296–$930, and HomeGuide's minimum job fee runs $350–$650 or more — one visit, one or two damaged areas, finished smooth and paint-ready. |
| Ceiling repair or water-damage section | $600 – $1,550 | Overhead work and wet work price higher. Angi prices ceiling repair at $220–$1,300 and water-damaged drywall at $600–$1,550 including cutting out the damaged board and checking what is behind it, and HomeGuide totals ceiling repairs at $350–$1,500 or more. |
Where the money goes
| Part of the job | Share | Note |
|---|---|---|
| Labor | 50–70% | The work is the product: HomeGuide puts labor at 50–70% or more of a repair total at $60–$150 an hour, and Angi prices handypeople at about $60 an hour against about $90 for a drywall contractor — three coats with drying time between them is why a small patch still spans two visits |
| Texture matching & finishing | 10–18% | The invisible part is the expensive part. HomeGuide prices tape, mud and finish at $1.50–$3.50 per square foot and texturing at $0.80–$2.00 or more, and Angi prices retexturing at about $1 per square foot — a patch you can see is a patch that was not finished |
| Materials (board, compound, tape & patch) | 10–20% | Genuinely cheap: Angi prices a standard sheet at $10–$25, a repair kit at $10–$30 and a full basic supply bundle at about $45 — which is exactly why the minimum fee, not the materials, sets the floor on small jobs |
| Priming, painting & cleanup | 8–15% | Angi prices paint at $15–$55 a gallon and painting at $2–$6 per square foot where the whole wall is recoated, HomeGuide adds $125 or more for paint matching, and larger repairs carry a debris charge — Angi lists about $200 on big jobs |

What moves the price most
The minimum fee is the floor under every small job. HomeGuide puts the minimum job fee at $350–$650 or more and Angi's most-homeowners band starts at $296, because setup, three coats and drying time cost the same for a 2-inch hole as for a 2-foot one — bundling every ding and crack into one visit is the single reliable saving. Size prices by the foot only once the job is large: Angi prices repair work at $50–$75 per square foot of damaged area (its table runs $500–$750 at 10 square feet), while HomeGuide prices large multi-room replacement at $3–$8 per square foot — two different units for two different scopes, and confusing them makes honest quotes look wrong. Ceilings cost more than walls — overhead mud work is slower, and the bands reach $1,300 in Angi and $1,500 or more in HomeGuide. Water changes the job entirely: Angi prices water-damaged drywall at $600–$1,550 because the board comes out, the cavity is checked and the leak must be fixed first — drywall repaired over an active leak is bought twice. Finally, texture is the stealth line — smooth walls forgive, while orange-peel and knockdown must be matched, and a visible patch in a sunlit living room costs more time than the same patch in a closet.
Worked example: how a typical drywall repair budget breaks down
A typical job: a doorknob hole and a 6-foot crack run in one living room — the hole cut back to a backed patch, the crack taped and floated, three coats sanded between visits, texture matched, primed and the paint blended. The budget below totals $600 — the "most homeowners pay around" figure from the top of this page — split using this page's own cost breakdown. It shows how a real quote at that level is usually composed; every line is built from the ranges on this page, and it is an illustration, not a quote for your project.
| Line item | Example budget |
|---|---|
| Labor (two visits, three coats) | $360 |
| Texture matching & finishing | $96 |
| Materials (patch, board, compound & tape) | $72 |
| Priming, paint matching & cleanup | $72 |
| Total | $600 |
What most people get wrong
- Paying a minimum fee three times — HomeGuide puts the minimum job fee at $350–$650 or more per visit, so every hole, ding and crack in the house belongs in one bundled visit, not three separate ones.
- Patching water-stained drywall before the leak is fixed — Angi prices water-damaged drywall at $600–$1,550 because the board comes out and the cause is dealt with; a patch over an active leak is bought twice.
- Comparing a per-square-foot quote with a flat quote without asking the unit — Angi prices repaired area at $50–$75 per square foot while HomeGuide prices large replacement work at $3–$8 per square foot of new sheet; they are different scopes, not different honesty.
- Skipping the texture match to save the line — a smooth patch in an orange-peel wall announces itself in every raking light, and HomeGuide's $125-or-more paint-matching line exists because blending is the visible half of the job.
Costs in your city
Drywall repair is local labor over trivial materials. Angi prices the full material bundle at about $45 in every market, so the bill follows your market's handyman and drywall rates — $60–$150 an hour in HomeGuide, about $60 for a handyperson against about $90 for a drywall contractor in Angi — and the $350–$650 minimum fee in HomeGuide is higher in high-cost metros for the same reason. Housing stock matters as much as wages: older homes bring plaster, lathe and lead-safe practices into a quote that a 2010 subdivision never sees, and humid climates push water-damage sections to the top of Angi's $600–$1,550 band. Ask each bidder whether the price is flat or per square foot, how many coats and visits it includes, and whether priming and paint blending are inside it.

Frequently asked questions
How much does drywall repair cost?
Most homeowners pay $300–$900 for a professional repair visit, with $600 typical. Angi averages $613 across 36,945 verified projects with most jobs at $296–$930, HomeGuide prices a small hole at $300–$500 and larger areas at $500–$800 or more, and Homewyse's published calculator puts a typical single patch at $297–$472 including its minimum labor charge.
How much does it cost to patch a hole in drywall?
HomeGuide prices a small hole — under 4 inches, a doorknob or furniture puncture — at $300–$500 professionally, and a larger hole needing a new piece of drywall, backing and multiple coats at $500–$800 or more. Angi's per-foot table prices the repaired area itself at $50–$75 per square foot; the difference between the two figures is the $350–$650 minimum visit fee in HomeGuide that every small job pays.
How much does drywall ceiling repair cost?
More than the same damage on a wall. HomeGuide totals ceiling repairs at $350–$1,500 or more and Angi at $220–$1,300, because overhead work is slower, needs staging and shows every finishing flaw in raking light. A water-stained ceiling patch sits at the top of the band once the stained board is cut out and the leak above it is confirmed fixed.
Does drywall repair include painting?
Usually not beyond primer, and it is the most common surprise in the quote. HomeGuide adds $125 or more for paint matching alone, and Angi prices painting at $2–$6 per square foot where the wall is recoated to blend the patch. Ask whether the number leaves the repair primed, paint-matched or fully recoated — three different finishes at three different prices.
Should I repair drywall myself?
A nail hole, yes — Angi prices a DIY repair kit at $10–$30. The professional case is everything bigger: labor is 50–70% of the bill in HomeGuide because the skill is in the feathered coats and the texture match, and a ceiling, a water stain or a crack that keeps returning all have a cause behind the board that a patch alone will not fix.






