Home › Cost Guides › Deck Cleaning
Cost Guide

How Much Does Deck Cleaning Cost? (2026)

By Ahsan ul Haq · Last updated: 11 November 2026 · Planning estimate — not a quote · How we estimate

Typical range
$100 – $250
Most homeowners pay around $150 · Standard professional wash of a typical residential deck, surface and steps
typical
$100$250
Low end = minor scope  ·  marker = typical middle  ·  high end = major scope. Add 10–20% contingency to any budget.
Modern house with a wooden deck and pergola beside a lawn

Deck Cleaning cost at a glance

  • Typical range: $100 – $250
  • Most homeowners pay: around $150
  • Prices vary most by: Labor (washing, brushing, rinsing) (50–65% of the budget)

Cross-checked against two published sources for this project. Sources used for this page: Angi's deck pressure washing cost guide, updated October 1, 2026 (national average $150, most $100–$250, heavily soiled decks $500 or more; sizes 300 sq ft $100, 700 sq ft $200–$300, 1,000 sq ft $300–$400; base fee $100 for decks up to 300 sq ft plus $0.30–$0.40 per sq ft beyond that; hourly $50–$100; sealing $550–$1,400, staining $550–$1,250), HomeGuide's deck staining and power-washing cost data (power washing a deck $0.35–$0.77 per sq ft bundled into a bigger job; stripper $20–$30 a gallon covering about 150 sq ft; washer rental about $38 a day plus a $50 deposit; clean-and-restain $1.50–$4.00 per sq ft; buying a decent electric washer $200–$400) and EngineerFix's pool-deck pressure washing cost guide (national $100–$250, average about $150; $0.30–$0.50 per sq ft; minimum $100–$120 for decks under 300 sq ft; hourly $50–$150; a 500 sq ft deck $150–$250; one to two hours typical). The page's typical band is the Angi–EngineerFix agreement; HomeGuide's per-foot rate is published as the pricing-model note, not averaged into a project total. Checked November 2026.. Sources last checked: October 2026 — HomeGuide, Angi. How we calculate these costs

Cost by scope

Deck Cleaning cost ranges by scope — chart of the table below
ScopeTypical costWhat it includes
Standard wash, typical deck$100 – $250Pressure or soft wash of the deck surface and steps, with detergent pre-treatment and a rinse — where most routine cleanings land
Large deck, about 1,000 sq ft$300 – $400The same wash scaled by area; Angi's size table puts a 1,000 sq ft deck here, against $100 for a 300 sq ft deck
Clean and seal, typical deck$550 – $1,400Wash plus a sealer coat; sealing is the bigger job and is priced separately from a wash-only visit

Where the money goes

Part of the jobShareNote
Labor (washing, brushing, rinsing)50–65% of totalThe crew's time is the largest line; Angi prices hourly washing at $50–$100 an hour
Cleaning solutions and pre-treatment10–20%Deck cleaner at $15–$25 a gallon; algae, mildew and gray-weathering treatments sit here
Equipment, water and fuel10–20%Washer, surface cleaner, hoses and transport; rental alone is about $38 a day in HomeGuide's data
Steps, railings and detail work10–20%Hand work where a wand cannot reach, and the part most often left out of a bare per-square-foot quote
Labor (washing, brushing, rinsing) · 50–65%Cleaning solutions and pre-treatment · 10–20%Equipment, water and fuel · 10–20%Steps, railings and detail work · 10–20%
Estimator’s note: on deck cleaning, labor (washing, brushing, rinsing) is usually where quotes swing most (50–65% of total of a typical budget). Ask every contractor to itemize that line in writing — totals are only comparable when that part is.
A worker pressure washing outdoor steps — the same wash crew and wand as a deck job, on steps rather than boards; steps and railings are the detail line in this page's breakdown.
A worker pressure washing outdoor steps — the same wash crew and wand as a deck job, on steps rather than boards; steps and railings are the detail line in this page's breakdown.

What moves the price most

Deck size is first: Angi's size table runs 300 sq ft at $100, 700 sq ft at $200–$300 and 1,000 sq ft at $300–$400, and many companies price from a $100 base fee for decks up to 300 sq ft, then add $0.30–$0.40 per sq ft beyond that — a measured deck beats a guessed one. Material and method are second: soft wood needs a gentler wash or the grain splinters, while composite and aluminum take higher pressure, which is why a wood deck often costs more to clean than a composite one. Condition is third: algae, mildew and gray weathering add pre-treatment and a second pass, and stripping a failed finish is its own line — HomeGuide prices stripper at $20–$30 a gallon covering about 150 sq ft. Pricing model is fourth: flat, per-square-foot ($0.30–$0.50 in EngineerFix's tables, $0.35–$0.77 bundled in HomeGuide's) or hourly at $50–$100 — compare the model, not just the total. For the stain that usually follows a wash, see our deck staining guide, for boards that need more than cleaning, see our deck repair guide, and for washing the rest of the house, see our pressure washing guide.

Work out your quantities: before you compare quotes, run your measurements through our free remodeling calculators (paint, tile, concrete and flooring) — each one shows its formula and runs entirely in your browser.

Worked example: how a typical deck cleaning budget breaks down

Take the typical job — a standard residential deck, one wash, surface and steps, detergent pre-treatment and a rinse. Here is a realistic $150 version of that invoice: The budget below totals $150 — the "most homeowners pay around" figure from the top of this page — split using this page's own cost breakdown. It shows how a real quote at that level is usually composed; every line is built from the ranges on this page, and it is an illustration, not a quote for your project.

Line itemExample budget
Labor — washing, brushing and rinsing$85
Cleaning solutions and pre-treatment$20
Equipment, water and fuel$25
Steps, railings and detail work$20
Total$150

What most people get wrong

  • Comparing a per-square-foot quote with a flat-rate quote on the total — one includes steps and railings and the other does not, and only the same bundle is comparable.
  • Running full pressure over soft wood — splintered grain cannot be washed back, and the repair costs more than the wash saved.
  • Sealing over a dirty deck — a finish laid over dirt and mildew fails early, which is why the wash comes before the seal, not instead of it.
  • Skipping the pre-treatment on algae and mildew — a rinse alone moves the green around, and the regrowth arrives within weeks.

Costs in your city

Deck cleaning is crew-labor pricing around an area: the same standard deck quotes near the bottom of the band where labor rates are low and toward the top in a high-cost metro, while detergent and rental ship nationally. Climate travels with the city — shaded, damp decks grow algae faster and need pre-treatment more often, and arid decks carry dust and UV graying instead, which changes both the method and the visit count. Ask each bidder for the measured deck area, the wash method, and whether steps and railings are inside the total or an add-on.

How this estimate was built: deck cleaning figures were cross-checked across Angi’s deck pressure washing cost guide, HomeGuide’s deck power-washing cost data and EngineerFix’s pool-deck pressure washing guide. Angi publishes a $150 average inside a $100–$250 most-pay band, EngineerFix publishes the same $100–$250 band with about the same $150 average, and HomeGuide publishes a $0.35–$0.77 per-square-foot bundled rate — so the typical band is drawn on the Angi–EngineerFix agreement, and the per-foot rate is published as the pricing-model note, not averaged into a project total. Checked November 2026. Full method: How We Estimate Costs.
A house and its deck from the lawn — area is the quote, measured in square feet at $0.30–$0.50 in EngineerFix's tables, which is why a measured deck beats a guessed one.
A house and its deck from the lawn — area is the quote, measured in square feet at $0.30–$0.50 in EngineerFix's tables, which is why a measured deck beats a guessed one.

Frequently asked questions

How much does it cost to clean a deck?

Most professional deck cleanings land between $100 and $250, with $150 typical. Angi averages $150 for a pressure wash, EngineerFix averages about $150 for a pool-deck wash, and both put the standard band at $100–$250.

How much does deck cleaning cost per square foot?

Expect $0.30–$0.50 per sq ft in EngineerFix's tables, or $0.35–$0.77 per sq ft for power washing bundled into a bigger job in HomeGuide's data — plus a $100 minimum for small decks, which is why a small deck prices above its per-foot rate.

Should a deck be pressure washed or soft washed?

Soft wood gets a gentler wash: too much pressure splinters the grain, and that damage cannot be washed away. Composite and aluminum handle higher pressure. A quote should name the method — soft wash, pressure wash or hand scrub — before you compare it.

How often should a deck be cleaned?

Most decks benefit from a wash at least once a year, and always before staining or sealing, since a finish laid over dirt and mildew fails early. Heavily shaded or damp decks, where algae builds fastest, may need it more often.

Is it cheaper to clean a deck yourself?

The materials are: deck cleaner at $15–$25 a gallon plus a stiff brush, with washer rental at about $38 a day plus a $50 deposit in HomeGuide's data, or $200–$400 to buy a decent electric washer. What the professional price buys is the right pressure for the wood, even coverage, and the steps and railings done properly.

Before you sign: confirm the measured deck area in writing, get the wash method named, ask whether steps and railings are inside the total, check whether sealing is included or a separate job, and keep a 10–20% contingency separate from the contract price.

Ahsan ul Haq — Editor, Remodel Cost Hub

Ahsan compiles and edits the cost guides on Remodel Cost Hub, cross-checking every range against at least three published sources before it is published — the full method is on our Methodology page. Spot an error on this page? Send a correction.

Deck Cleaning cost range graphic
Save this range for later: Pin it on Pinterest

Related cost guides

Stone houses with tall masonry chimney stacks and rows of chimney pots against a cloudy sky

Chimney Repair Cost

$200 – $850

The typical project is a common repair found at inspection — a cap, crown sealing, minor repointing or flashing work on a masonry chimney. Repointing a whole stack, replacing a liner and rebuilding above the roofline are different leagues of work and are tiered separately below; installing a fireplace itself is priced on the fireplace installation page.

Brick chimney with metal caps over two flues on a shingle roof

Chimney Cap Installation Cost

$200 – $650

Chimney cap installation typically costs $200 – $650 for a standard prefabricated cap, with about $300 the figure most jobs land near — Angi's national average is $300 inside its $190–$650 most-pay band, and HomeGuide prices prefabricated caps at $200–$650 installed. The cap is a small job with an outsized payoff: it keeps rain, animals and sparks out of the flue, and the labor line is roughly half the bill because the work happens on a roof.

Modern houses with dark shingle gable roofs, white render and wood cladding under a blue sky

Roof Repair Cost

$400 – $2,000

The typical project is a professional repair of one problem area — a leak traced and sealed, a patch of shingles replaced, or flashing renewed — on an otherwise sound roof, at about $3.50–$12 per sq ft of repaired area. Structural work (sagging decks, trusses, widespread rot) is a different league and is tiered separately below; a whole new roof is priced on the roof replacement page.

Large white house with steep gabled shingle roofs and a wide lawn under a blue sky

Roof Inspection Cost

$125 – $400

A roof inspection typically costs $125 – $400 for a standard home, with about $250 the figure most standard inspections land near — Angi's national average is $257 inside its $125–$392 most-pay band, and HomeGuide's national average is $280 inside its $100–$400 band. This guide prices the inspection and written report, not any repair it finds.

Craftsman-style house with a stone-veneer foundation base, shingle and metal roofs and a concrete driveway

Foundation Repair Cost

$2,200 – $8,100

The typical project is a diagnosed structural repair on one part of the house — several piers, wall reinforcement, or a leaking section made good — at $1.50–$12 per sq ft of foundation across methods in Angi. Sealing a single crack is a few hundred dollars and lifting a whole house is tens of thousands; both are tiered separately below. Managing basement water alone is priced on the basement waterproofing page.

Concrete and block foundation walls under construction, with vertical rebar capped in red, workers and scaffolding under a blue sky

Foundation Installation Cost

$4,000 – $15,000

A new foundation for a 1,000-square-foot footprint — excavation, footings, concrete and reinforcement together, with the type (slab, pier and beam, or basement) setting the price