Deck Staining cost at a glance
- Typical range: $550 – $1,250
- Most homeowners pay: around $850
- Prices vary most by: Labor (55–75% of the budget)
Cross-checked against four published sources for this project. Sources used for this page: Angi's deck staining cost guide, HomeGuide's deck staining cost guide and Fixr's deck staining cost data (as published in HomeLight's cost comparison). Sources last checked: October 2026 — HomeGuide, HomeLight, Fixr, Angi. How we calculate these costs
Cost by scope

| Scope | Typical cost | What it includes |
|---|---|---|
| Wash, stain & seal — a standard deck | $550 – $1,250 | The typical project on this page. Angi averages $850 with most homeowners paying $550–$1,250 at $2–$4 per square foot, and HomeGuide's stain-a-deck guide runs $450–$1,000 at $1.50–$4.00 per square foot including the wash and the seal — the two datasets overlap on the same job. |
| Small deck or a sound-surface refresh | $300 – $750 | A small deck, or boards whose old finish is intact enough to clean and recoat without stripping. Angi's size table runs 100–192 square feet at $200–$775, and HomeGuide's minimum service charge starts at $300 — small decks price by the visit, not by the foot. |
| Strip, sand & restain — or a large deck | $1,150 – $2,350 | The refinishing tier: failed finish stripped, boards sanded, then stained and sealed. HomeGuide's refinishing guide prices the full process at $3.00–$6.50 per square foot, and Angi's size table reaches $1,150–$2,350 at 586 square feet even before heavy prep is added. |
Where the money goes
| Part of the job | Share | Note |
|---|---|---|
| Labor | 55–75% | The work is the product: HomeGuide prices labor at $1–$3 per square foot and about 75% of a staining total, and its method table charges the steps separately — washing, staining and sealing each carry their own per-foot rate |
| Stain & sealer | 15–25% | HomeGuide prices stain by the gallon — oil-based at $25–$80, water-based at $20–$60, semi-transparent and solid-color at $20–$70 — and a two-coat job on thirsty old boards drinks noticeably more of it |
| Washing, sanding & prep | 10–18% | HomeGuide prices power washing and prep inside its $1.50–$4.00 per-foot band, and stripping a failed finish is the step that moves a deck out of the standard tier entirely — stain over failing stain fails the same way |
| Minor repairs & supplies | 5–10% | A popped board re-fastened, a split board replaced, brushes, tape and masking. Small money, but a stain job faithfully preserves whatever it covers, so the repairs happen first or not at all |

What moves the price most
Square footage is the quote. Angi prices staining at $2–$4 per square foot and HomeGuide at $1.50–$4.00, so a 200-square-foot deck and a 500-square-foot deck are different projects wearing the same name — Angi's own table runs from $200–$400 at 100 square feet to $1,150–$2,350 at 586. The old finish decides the tier: a sound surface needs a wash and a coat, while a peeling finish needs stripping and sanding, which is HomeGuide's refinishing band at $3.00–$6.50 per square foot. Railings and stairs price like extra deck — HomeGuide prices railings at $4–$14 per linear foot, because spindles are slow, hand-finished area. Stain choice changes both price and interval: transparent and semi-transparent stains show the grain and weather sooner; solid stains cover more and last longer between coats, and Angi puts the restain cycle at every 2–3 years either way. Finally, access and height — a ground-level deck is a day of easy work, while a second-story deck on a slope prices its staging and ladder time into the same per-foot work.
Worked example: how a typical deck staining budget breaks down
A typical job: a 320-square-foot wood deck power washed and left to dry, two popped boards re-fastened, then one coat of semi-transparent stain-and-sealer worked in by brush and roller, railings included in the per-foot rate. The budget below totals $850 — the "most homeowners pay around" figure from the top of this page — split using this page's own cost breakdown. It shows how a real quote at that level is usually composed; every line is built from the ranges on this page, and it is an illustration, not a quote for your project.
| Line item | Example budget |
|---|---|
| Labor (wash, prep & application) | $510 |
| Stain & sealer (about 4 gallons) | $170 |
| Power washing & sanding prep | $102 |
| Minor repairs & supplies | $68 |
| Total | $850 |
What most people get wrong
- Staining over a failing finish — new stain does not glue old stain down, and the peel returns within the season; HomeGuide's refinishing band of $3.00–$6.50 per square foot exists because stripping first is the honest version of the job.
- Comparing per-foot quotes without the coat count and the railings — HomeGuide prices railings separately at $4–$14 per linear foot, and a one-coat quote against a two-coat quote is not a saving.
- Skipping the dry time after washing — stain over damp wood blushes and peels, and the wash day and the stain day are different days on every professional schedule for a reason.
- Choosing color from the can lid — stain reads differently on weathered pine than on the sample board; a test patch on a hidden board costs one brushstroke and prevents a 320-square-foot regret.
Costs in your city
Deck staining is local labor over national materials. Stain itself runs $20–$80 a gallon in HomeGuide in every market, but the work is priced per square foot — $2–$4 in Angi, $1.50–$4.00 in HomeGuide — and the labor share of 55–75% follows your market's painter and handyman rates. Climate sets your calendar more than your price: Angi puts restaining at every 2–3 years, harsh-sun and high-UV regions live at the 2-year end of that cycle, and rainy regions lose staining days to the dry-wood requirement, which is why spring slots book out. Ask each bidder for the per-foot rate, whether railings and stairs are inside it, how many coats, and how many dry days they require after washing.

Frequently asked questions
How much does it cost to stain a deck?
Most homeowners pay $550–$1,250 to have a deck of about 300 to 350 square feet washed, stained and sealed, with $850 typical. Angi averages $850 across verified projects, HomeGuide averages $730 with most jobs at $450–$1,000, and Fixr's published average is $750 — three datasets within a hundred dollars of each other.
How much does deck staining cost per square foot?
Angi prices staining at $2–$4 per square foot and HomeGuide at $1.50–$4.00 per square foot including power washing, stain and seal. Full refinishing — stripping and sanding before the stain — runs $3.00–$6.50 per square foot in HomeGuide, which is why the condition of the old finish matters more than the brand of the new one.
How often does a deck need restaining?
Angi puts the cycle at every 2 to 3 years. Traffic lanes, full-sun boards and horizontal surfaces weather fastest; the practical test is water — if a sprinkled deck drinks the water in instead of beading it, the finish is done and the next season's gray is already scheduled.
What is the difference between staining and sealing a deck?
Stain adds color and some protection; sealer is the water-repelling clear coat, and most modern deck products combine both. Angi prices sealing alone at $550–$1,300, close to a full stain job — which is why most quotes bundle washing, staining and sealing into the single per-foot rate on this page.
Can I stain my deck myself?
Yes — it is the classic DIY trade of money for a weekend. The material side is modest: stain runs $20–$80 a gallon in HomeGuide depending on type, and labor is 55–75% of the professional price. What the professional price buys is the prep discipline — washing, drying time, stripping where needed — which is the part that decides how long the finish lasts.






