Roof Inspection cost at a glance
- Typical range: $125 – $400
- Most homeowners pay: around $250
- Prices vary most by: Inspector labor — roof walk and attic check (60–75% of the budget)
Cross-checked against two published sources for this project. Sources used for this page: Angi's roof inspection cost guide, updated September 23, 2026 (national average $257 across 2,573 verified projects, most $125–$392, full range $75–$1,200; physical $75–$200, drone $150–$400, infrared $400–$600; attic inspection add-on $200–$500; roof certification $150–$200), HomeGuide's roof inspection cost guide (national average $280, average range $100–$400, minimum $75, maximum $1,200; physical $75–$200, drone $100–$450, infrared $400–$600; attic inspection $200–$500; 3–4 page report; structural engineer roof inspection $150–$600) and HomeGuide's drone roof inspection cost guide (drone inspection $150–$600, most homeowners paying around $375 for a standard visual inspection; standard visual $150–$400, thermal and infrared $400–$600, LiDAR and 3D mapping $400–$800; pre-listing inspection $200–$400; traditional inspection $75–$200). The page's typical band is the Angi most-pay band against HomeGuide's average range, and its $250 most-pay figure sits near both published averages. Sources last checked: October 2026 — HomeGuide, Angi. How we calculate these costs
Cost by scope

| Scope | Typical cost | What it includes |
|---|---|---|
| Physical walk-on inspection | $75 – $200 | The cheap end: Angi and HomeGuide both price a physical inspection at $75–$200 — the standard job on a flat, accessible roof |
| Standard inspection with photos and written report — the typical job | $125 – $400 | The shared band: Angi's $125–$392 most-pay band against HomeGuide's $100–$400 average range, for the walk-on inspection plus photos and a written report |
| Drone or infrared inspection | $150 – $600 | The expensive end: Angi prices drone inspections at $150–$400 and infrared at $400–$600, and HomeGuide's drone guide runs $150–$600 with thermal at $400–$600 — steep, large or leak-hunting jobs |
Where the money goes
| Part of the job | Share | Note |
|---|---|---|
| Inspector labor — roof walk and attic check | 60–75% of total | Time on the roof and in the attic is the job; size, pitch and access set the hours, and steep or fragile roofs take longer than flat ones |
| Photos, measurements and written report | 15–25% of total | HomeGuide describes a 3–4 page report with findings, recommendations and estimated repair costs — the document, not just the visit, is part of the fee |
| Drone or infrared equipment | 10–25% of total | Only on drone and infrared jobs: HomeGuide's drone guide prices thermal imaging at $400–$600, against $150–$400 for a standard visual drone flight |

What moves the price most
Inspection method is first: Angi prices a physical inspection at $75–$200, a drone inspection at $150–$400 and an infrared inspection at $400–$600 — the method, not the house, is the biggest price step. Roof size, pitch and access are second: a large or steep roof takes longer and carries more risk, and a roof nobody can safely walk needs the drone tier. Purpose is third: HomeGuide's drone guide prices a pre-listing inspection at $200–$400, while an insurance or leak-hunting inspection needs the report and photos a buyer or adjuster can use. Add-ons are fourth: Angi prices an attic inspection at $200–$500 and a roof certification at $150–$200 on top of the inspection, and HomeGuide prices a structural engineer's roof inspection at $150–$600 where structure is in question. For what an inspection finds, see our roof repair guide, and for keeping the roof clean see our roof cleaning guide.
Worked example: how a typical roof inspection budget breaks down
A typical job: a standard walk-on inspection of an average home — shingles, flashing and gutters checked from the roof, the attic peeked at from inside, photos taken, and a written report with repair priorities. Here is a realistic $250 version of that invoice, at the middle of the published bands: The budget below totals $250 — the "most homeowners pay around" figure from the top of this page — split using this page's own cost breakdown. It shows how a real quote at that level is usually composed; every line is built from the ranges on this page, and it is an illustration, not a quote for your project.
| Line item | Example budget |
|---|---|
| Roof surface, flashing and gutter check | $150 |
| Attic peek and interior leak signs | $50 |
| Photos and written report | $50 |
| Total | $250 |
What most people get wrong
- Comparing a free estimate with a paid inspection — Angi notes some contractors offer basic inspections for free before work, but an estimate is a repair quote while an inspection is a documented assessment with a report, and only one of them serves a buyer or an insurer.
- Booking a drone-only inspection for a leak — a drone photographs the surface but cannot feel soft decking underfoot, so a hands-on check is still worth it before a major repair decision.
- Accepting a roof-only check when the leak shows inside — the attic is where a leak writes its history in stains and damp insulation, and Angi prices a full attic inspection at $200–$500 for exactly that reason.
- Treating certification as included — Angi prices a roof certification at $150–$200 as an add-on, so a lender or insurer requirement discovered after the visit is a second fee, not a line already paid.
Costs in your city
Roof inspection is inspector-time pricing: the same walk-on job quotes near the bottom of the band where roofer rates are low and well above it in a high-rate metro, while the report format is the same everywhere. Climate writes the workload — hurricane and hail regions generate the insurance inspections, ice-dam country produces the winter leak hunts, and tile in the Southwest and slate in the Northeast need specialists at the top of the method ladder. Roof style travels with the city too: steep pitches and multi-level roofs push jobs from the $75–$200 physical tier into the $150–$400 drone tier. Ask each bidder which method is quoted, whether photos and a written report are included, and whether attic access or certification are inside the number.

Frequently asked questions
How much does a roof inspection cost?
Angi's national average is $257 with most homeowners paying $125–$392, and HomeGuide's national average is $280 inside a $100–$400 range. This page's typical band is $125–$400, with about $250 the figure most standard inspections land near.
What does a physical, drone or infrared inspection cost?
Angi prices a physical walk-on inspection at $75–$200, a drone inspection at $150–$400 and an infrared inspection at $400–$600. HomeGuide's drone guide prices a standard visual drone flight at $150–$400 and thermal imaging at $400–$600.
Is a roof inspection free?
Sometimes, but not as a standalone service: Angi notes some roofing contractors offer basic inspections for free before performing work, while a paid inspection runs $75–$600 by method. A free estimate is a repair quote, not a documented inspection with a report.
How often should a roof be inspected?
Angi advises at least once a year, ideally in early fall or spring before heavy weather. HomeGuide's maintenance guidance puts a professional inspection every 3–5 years with a self-check at least once a year — the annual check catches new damage, the full inspection documents the roof's condition.
Does a roof inspection include repairs?
No — the inspection and its written report are the product on this page, and any repair it finds is priced separately, starting with our roof repair guide. Angi prices an attic inspection at $200–$500 and a certification at $150–$200 as add-ons, not inside the standard fee.






