Home › Cost Guides › Asphalt Shingle Roof Installation
Cost Guide

How Much Does an Asphalt Shingle Roof Installation Cost? (2026)

By Ahsan ul Haq · Last updated: 11 November 2026 · Planning estimate — not a quote · How we estimate

Typical range
$7,500 – $13,000
Most homeowners pay around $10,000 · Asphalt shingle roof installation typically costs $7,500 – $13,000 for a standard architectural-shingle roof of about 20 squares (roughly 1,500–2,000 square feet of roof surface), at about $4–$6 per square foot installed, with about $10,000 the figure most jobs land near — Angi's city guides average roughly $10,049–$11,823 across major cities, HomeGuide averages $5,700–$12,000 at $3–$5 per square foot installed, and Forbes Home prices basic asphalt shingles at $3.70–$8.75 per square foot installed (three-tab is the form basic shingles often take), with architectural and other high-end asphalt shingles up to $12.25 per square foot. A simple 3-tab roof lands below the band, and a steep, complex or luxury-shingle roof runs above it, while the shingles, underlayment, labor, tear-off and flashing below are all inside the total.
typical
$7,500$13,000
Low end = minor scope  ·  marker = typical middle  ·  high end = major scope. Add 10–20% contingency to any budget.
Suburban house with a shingled roof in sunlight

Asphalt Shingle Roof Installation cost at a glance

  • Typical range: $7,500 – $13,000
  • Most homeowners pay: around $10,000
  • Prices vary most by: Installation labor (55–65% of the budget)

Cross-checked against three published sources for this project. Sources used for this page: Angi's city shingle-roof guides, updated May 2026 (Raleigh, Indianapolis, Charlotte, Phoenix, Boston, Houston, St. Louis, New York: city averages roughly $10,049–$11,823; most-pay bands roughly $7,100–$27,000 across cities; asphalt material 3-tab $0.70–$2, architectural $1–$3, luxury $1.50–$4 per square foot, with city variation $1–$5; labor 40–55% of total in some cities, around 60% in others; removal $1–$5 per square foot), HomeGuide's asphalt shingle roof guide ($3–$5 per square foot installed, average $5,700–$12,000; materials $1–$2 per square foot, labor $2–$3 per square foot, about 60–70% of total; installed per square: 3-tab $300–$500, architectural $400–$600, luxury $500–$700; HomeGuide's shingle guide: architectural $4–$6 per square foot installed) and Forbes Home, 'How Much Does It Cost To Shingle A Roof?', audited and verified Dec 2, 2024, read in full 2026-11-17 (basic asphalt shingles $3.70–$8.75 per square foot installed, often in three-tab pieces, lasting up to 20 years; architectural and other high-end asphalt shingles up to $12.25 per square foot; its 'Shingle Roof Cost Per Material' table puts Asphalt at $4.25–$12.25 per square foot — the page's own low end differs between the prose $3.70 and the table $4.25, both published). Sources last checked: October 2026 — Forbes Home, HomeGuide, Angi. How we calculate these costs

Cost by scope

Asphalt Shingle Roof Installation cost ranges by scope — chart of the table below
ScopeTypical costWhat it includes
Budget 3-tab shingles, simple roof$6,000 – $9,000The cheap end: HomeGuide prices 3-tab shingles at $300–$500 per square installed, and Angi prices 3-tab material at $0.70–$2 per square foot — the lightest shingle bill on a straightforward roof
Standard architectural shingles — the typical job$7,500 – $13,000The shared band itself: HomeGuide prices architectural shingles at $400–$600 per square installed, or $4–$6 per square foot, and Angi's city averages sit around $10,000–$11,800 — a 1,500- to 2,000-square-foot roof in architectural shingles
Premium or luxury designer shingles, steep or complex — the top end$13,000 – $20,000The expensive end: HomeGuide prices luxury shingles at $500–$700 per square installed, and Angi prices luxury material at $1.50–$4 per square foot — steep pitches, many valleys, extra stories and designer shingles push a job here

Where the money goes

Part of the jobShareNote
Shingles and underlayment30–40% of totalThe material: Angi prices asphalt material at 3-tab $0.70–$2, architectural $1–$3 and luxury $1.50–$4 per square foot, plus underlayment — the shingle grade is the price ladder
Installation labor55–65% of totalThe fitting: HomeGuide prices shingle labor at $2–$3 per square foot, about 60–70% of its totals, and Angi puts labor at around 60% in some cities and 40–55% in others — roofing is a labor-heavy job
Tear-off, disposal, flashing and permits10–20% of totalThe rest: Angi prices removal at $1–$5 per square foot, and flashing, vents, ridge caps, drip edge and permits sit here — a roof with two old layers costs more to strip than one
Shingles and underlayment · 30–40%Installation labor · 55–65%Tear-off, disposal, flashing and permits · 10–20%
Estimator’s note: on an asphalt shingle roof installation, installation labor is usually where quotes swing most (55–65% of total of a typical budget). Ask every contractor to itemize that line in writing — totals are only comparable when that part is.
A roofer nailing shingles into place: labor is 55–65% of the total on this page — HomeGuide prices shingle labor at $2–$3 per square foot
A roofer nailing shingles into place: labor is 55–65% of the total on this page — HomeGuide prices shingle labor at $2–$3 per square foot

What moves the price most

Shingle grade is the first driver: HomeGuide prices 3-tab at $300–$500 per square installed, architectural at $400–$600 and luxury at $500–$700 — the same roof in luxury shingles costs roughly half as much again as in 3-tab. Roof size, pitch and complexity are second: the price is per-square-foot maths, so a 2,000-square-foot roof costs roughly a third more than a 1,500-square-foot one on the same shingle, and steep pitches, valleys, hips and dormers add labor on top of the area. Tear-off is third: Angi prices removal at $1–$5 per square foot, so stripping two old layers instead of one moves the bill before a single new shingle goes on. Finally, place matters: Angi's city averages run from about $10,049 to $11,823 for the same kind of shingle roof — local labor rates are why two quotes for the same roof can differ by thousands.

Work out your quantities: before you compare quotes, run your measurements through our free remodeling calculators (paint, tile, concrete and flooring) — each one shows its formula and runs entirely in your browser.

Costs in your city

Labor is the biggest variable in any remodel, and labor is local — the same bathroom can price very differently in Houston than in Boston. We are adding city editions metro by metro, each with its own labor index, permit notes and climate factors, written for that city rather than copied from this page. Wave 1: Houston, Dallas–Fort Worth, Phoenix, Atlanta, Miami–South Florida, Orlando, Tampa, Charlotte, Austin and San Antonio. Until your city's page is live, use the national range here and weight it the way contractors do: Sun Belt labor often prices near or below the national middle, while coastal California and the Northeast metros often price well above it.

How this estimate was built: the range on this page is a synthesis of at least three published industry sources (national cost guides and the Remodeling Magazine Cost vs. Value data among them), cross-checked in October 2026. We publish planning ranges, never a single pretend-precise price. Full method: How We Estimate Costs.
Shingle texture in close view: the grade is the price ladder — HomeGuide prices 3-tab at $300–$500 per square installed against $400–$600 for architectural
Shingle texture in close view: the grade is the price ladder — HomeGuide prices 3-tab at $300–$500 per square installed against $400–$600 for architectural

Frequently asked questions

How much does an asphalt shingle roof cost per square foot?

About $4–$6 per square foot installed for architectural shingles in HomeGuide, and $3–$5 per square foot installed across shingle types in the same guide. Forbes Home prices basic asphalt shingles at $3.70–$8.75 per square foot installed — basic shingles often come in three-tab pieces — and architectural and other high-end asphalt shingles up to $12.25 per square foot. The spread reflects shingle grade and local labor.

3-tab or architectural shingles — which should I choose?

Architectural is the typical job on this page: HomeGuide prices 3-tab at $300–$500 per square installed against $400–$600 for architectural, and Angi prices 3-tab material at $0.70–$2 per square foot against $1–$3 for architectural. 3-tab is cheaper up front; architectural costs more per square but is the thicker, longer-lived shingle most crews install today.

Does the price include tearing off the old roof?

Tear-off is inside this page's breakdown, not free: Angi prices removal alone at $1–$5 per square foot, on top of disposal. A quote that lays new shingles over the old roof is a different scope — and on a roof that already has two layers, most codes require a full tear-off before new shingles go on.

Why do quotes for the same roof vary so much?

Place and pitch. Angi's city averages for a shingle roof run from about $10,049 to $11,823, and steep pitches, valleys and extra stories add labor on top of the area. Compare quotes on the same shingle grade, the same tear-off scope and the same flashing and vent work — a cheap quote that skips tear-off or flashing is not the same job.

What pushes a shingle roof above $13,000?

Luxury or designer shingles, steep or cut-up roofs, and extra tear-off. HomeGuide prices luxury shingles at $500–$700 per square installed, and Angi prices luxury material at up to $4 per square foot — on a 20-square roof, the shingle upgrade alone can add several thousand dollars before the extra labor.

Before you sign: get at least 3 written local quotes for the same written scope, confirm permits and who pulls them, and keep a 10–20% contingency separate from the contract price.

Ahsan ul Haq — Editor, Remodel Cost Hub

Ahsan compiles and edits the cost guides on Remodel Cost Hub, cross-checking every range against at least three published sources before it is published — the full method is on our Methodology page. Spot an error on this page? Send a correction.

Asphalt Shingle Roof Installation cost range graphic
Save this range for later: Pin it on Pinterest

Related cost guides

House with a steep dark grey pitched roof and a dormer window

Slate Roof Installation Cost

$15,000 – $35,000

Slate roof installation typically costs $15,000 – $35,000 for a standard roof of about 1,500 square feet, at about $10–$30 per square foot installed, with about $22,000 the figure most standard jobs land near — Angi averages $13,348 across its verified projects with most at $4,389–$22,377, HomeGuide prices natural slate at $10–$30 per square foot installed with an average home at $22,000–$70,000, and HomeBuddy puts most full installations at $15,000–$45,000 or more. Angi's lower average reflects its mix of synthetic and smaller roofs, not a cheaper natural-slate job — and the slate, underlayment, specialized labor, tear-off and any structural reinforcement below are all inside the total.

Cedar-shingled house with a curved balcony

Cedar Shake Roof Cost

$15,800 – $30,000

Cedar shake roof installation typically costs $15,800 – $30,000 for a standard roof, with about $21,000 the figure most jobs land near — Angi averages $21,000 with most at $15,800–$30,000 at $6–$15 per square foot installed, HomeGuide puts a real wood shake roof at $25–$30 per square foot installed with an average project of $12,900–$28,200, and HomeBuddy ranges a cedar shake roof at $16,000–$64,000 depending on size and grade. The shakes, underlayment, flashing, labor, tear-off and treatment below are all inside the total, while the ongoing maintenance — inspections, cleaning and re-sealing — is ongoing cost, published separately so it is not mistaken for part of the install price.

Two-story house with gray lap siding and two garage doors at dusk

Siding Replacement Cost

$5,500 – $17,500

Typical full-house replacement in a standard material, installed — about $4 – $13 per sq ft installed

Suburban home with light lap siding, front porch and lawn

Vinyl Siding Installation Cost

$6,400 – $18,400

Vinyl siding installation typically costs $6,400 – $18,400 for a full house in standard vinyl, with about $12,300 the figure most jobs land near — Angi averages $12,303 with most at $6,368–$18,377 at $3–$12 per square foot installed across 5,282 verified projects, HomeGuide prices vinyl at $4–$12 per square foot installed or $10,000–$30,000 for a 2,500-square-foot house, and This Old House prices vinyl at $3–$12 per square foot with an average vinyl project on a 2,000-square-foot home at $12,252. The panels, trim, house wrap and labor below are all inside the total for a full-house job, while removing old siding and repairing sheathing underneath — Angi names removal and structural repairs as the main spread drivers — is priced on the condition found, not assumed away.

Modern house with dark panel cladding and a bay window

Fiber Cement Siding Installation Cost

$6,600 – $23,200

Fiber cement siding installation typically costs $6,600 – $23,200 for a full house in standard lap boards, with about $14,900 the figure most jobs land near — Angi averages $14,901 with most at $6,583–$23,219 at $7–$18 per square foot installed across 2,297 verified projects, HomeGuide prices fiber cement at $6–$15 per square foot installed or $15,000–$37,500 for a 2,500-square-foot house, and Fixr averages $15,000 with most at $8,000–$26,600 at $5–$14 per square foot. The boards, trim, house wrap, flashing and labor below are all inside the total for a standard lap job, while panel and shingle styles — Angi prices panels at $6–$18 and shingles at $5–$14 per square foot — and factory-finished color are tiered separately, not averaged into the lap band.

Modern house with warm wood cladding at sunset

Wood Siding Installation Cost

$8,500 – $18,700

Wood siding installation typically costs $8,500 – $18,700 for natural wood or cedar siding on a 2,000-square-foot home, with about $13,600 the figure most jobs land near — Angi averages $13,600 with most at $8,500–$18,700 at $5–$11 per square foot installed for cedar, HomeGuide prices cedar at $6–$16 per square foot installed or $15,000–$40,000 for a 2,500-square-foot house, and This Old House averages about $29,250 at roughly $11.70 per square foot. This Old House's higher average is published as its larger, all-in scope rather than averaged away — this page's typical band follows Angi's 2,000-square-foot-home band. The boards, trim, stain or seal, house wrap and labor below are all inside the total for a standard clapboard or shiplap job, while premium species and shake styles — Angi prices shakes at $7–$11 per square foot — and the recurring restaining are tiered and published separately.