Whole House Rewiring cost at a glance
- Typical range: $6,000 – $15,000
- Most homeowners pay: around $10,000
- Prices vary most by: Electrician labor (55–70% of the budget)
Cross-checked against two published sources for this project. Sources used for this page: Angi's rewiring guide, updated October 13, 2026 (calculator $2–$4 per square foot including materials and labor; 2,500 sq ft $5,000–$10,500; electricians $50–$130 an hour; permit $75–$150, inspection $100–$125 in the calculator context; its headline verified-project average of $1,567, most $603–$2,596, covers small and partial jobs, not a full rewire — published here as the disagreement, not used for the band), HomeGuide's rewiring guide (full rewire $10,000–$30,000, $5–$17 per square foot; through attic, basement or floor joists $10,000–$20,000 with materials $4,000–$8,000 and labor $6,000–$12,000; opening walls, rewiring and replacing drywall $20,000–$30,000+ with materials $8,000–$12,000 and labor $12,000–$18,000; electricians $50–$130 an hour; permits $200–$900; knob-and-tube replacement $12,000–$35,000, $8–$17 per square foot) and InstaElectricians' 2026 rewiring guide (small home, 1,000 sq ft, $3,500–$8,000; medium home, 1,500–2,500 sq ft, $6,000–$15,000; large home, 3,000+ sq ft, $12,000–$20,000+; $6–$10 per square foot; partial rewiring $1,500–$8,000; materials $1,500–$6,000; labor $50–$100 an hour). Sources last checked: October 2026 — HomeGuide, Angi. How we calculate these costs
Cost by scope

| Scope | Typical cost | What it includes |
|---|---|---|
| Partial rewire or single circuit — the low end | $1,500 – $6,000 | The cheap end: InstaElectricians prices partial rewiring at $1,500–$8,000, and Angi's calculator puts small jobs near $2 per square foot — one room, one circuit or a kitchen or bath run, without opening the whole house |
| Standard full rewire, ~1,500 sq ft — the typical job | $6,000 – $15,000 | The shared band itself: InstaElectricians' $6,000–$15,000 for a medium home, with HomeGuide's through-joist band of $10,000–$20,000 overlapping it — new wire, devices and boxes throughout, pulled through attic, basement or crawlspace access |
| Open-wall or knob-and-tube replacement — the top end | $15,000 – $30,000 | The expensive end: HomeGuide prices opening walls, rewiring and replacing drywall at $20,000–$30,000+, and knob-and-tube replacement at $12,000–$35,000 — the walls come down, the wire goes in, and the drywall goes back up |
Where the money goes
| Part of the job | Share | Note |
|---|---|---|
| Electrician labor | 55–70% of total | The dominant line: Angi and HomeGuide both price electricians at $50–$130 an hour, InstaElectricians at $50–$100 — pulling wire through finished walls is slow, licensed work, and access decides where in the range a job lands |
| Wire, devices and materials | 25–35% of total | The material: HomeGuide prices materials at $4,000–$8,000 for a through-joist rewire and $8,000–$12,000 for an open-wall job, InstaElectricians at $1,500–$6,000 — cable, boxes, outlets, switches and breakers |
| Permits, inspection and drywall patching | 5–15% of total | The compliance and finish lines: Angi prices permits at $75–$150 with inspection at $100–$125 in its calculator, HomeGuide at $200–$900 — patching is included in this band, but full re-plastering or repainting a whole house is not |

What moves the price most
Access is the first driver: HomeGuide prices a rewire through attic, basement or floor joists at $10,000–$20,000 against $20,000–$30,000+ when walls are opened and drywall replaced — how the electrician reaches the wire is the price ladder. Home size is second: InstaElectricians prices a small 1,000-square-foot home at $3,500–$8,000, a medium 1,500–2,500-square-foot home at $6,000–$15,000 and a large 3,000-square-foot-plus home at $12,000–$20,000+ — the band scales with square footage at roughly $6–$10 per square foot in its guide. Old wiring is third: HomeGuide prices knob-and-tube replacement at $12,000–$35,000, and cloth or aluminium wiring often needs the same treatment — age is not cosmetic, it is scope. Panel and service are fourth: this band keeps the existing panel; a panel replacement is a separate job (see our electrical panel upgrade guide) and a service upgrade adds more. Finally, finish level closes the bill: drywall patching is inside the band, but repainting rooms or replastering whole walls is not, so agree the finish before work starts.
Costs in your city
Labor is the biggest variable in any remodel, and labor is local — the same bathroom can price very differently in Houston than in Boston. We are adding city editions metro by metro, each with its own labor index, permit notes and climate factors, written for that city rather than copied from this page. Wave 1: Houston, Dallas–Fort Worth, Phoenix, Atlanta, Miami–South Florida, Orlando, Tampa, Charlotte, Austin and San Antonio. Until your city's page is live, use the national range here and weight it the way contractors do: Sun Belt labor often prices near or below the national middle, while coastal California and the Northeast metros often price well above it.

Frequently asked questions
How much does it cost to rewire a whole house?
About $6,000–$15,000 for a full rewire of a ~1,500-square-foot home with attic, basement or crawlspace access, with about $10,000 the common middle. InstaElectricians prices a medium home at exactly that band, and HomeGuide's through-joist band of $10,000–$20,000 overlaps it.
How much does rewiring cost per square foot?
About $4–$10 per square foot for a standard full rewire — $6,000–$15,000 over 1,500 square feet. HomeGuide prices full rewires higher, at $5–$17 per square foot, because its band includes open-wall jobs; InstaElectricians puts the standard rate at $6–$10 per square foot.
Should I rewire the whole house or just part of it?
A partial rewire at $1,500–$8,000 in InstaElectricians makes sense for one failing circuit or one renovated room. A full rewire is the right call when the wiring is old throughout the house, when circuits keep tripping, or when a renovation has the walls open anyway — doing it piecemeal costs more in total than doing it once.
What is knob-and-tube wiring, and why does it cost more to replace?
Knob-and-tube is the pre-1940s wiring system: single insulated copper conductors run through porcelain knobs and tubes, with no ground wire. HomeGuide prices its replacement at $12,000–$35,000, or $8–$17 per square foot, because the old wire usually has to come out and the walls often have to be opened to get at it.
Do I need a new electrical panel when rewiring?
Not necessarily: this band keeps the existing panel, and a rewire can be done on a sound panel with capacity to spare. If the panel is a fuse box, undersized, or a recalled brand, replacement is usually quoted as a separate job — and it is worth doing while the walls are open.
Can I rewire a house myself?
No — rewiring is licensed electrician work in almost every jurisdiction: it must be permitted, inspected and brought up to current code, and mistakes are a fire risk. Angi and HomeGuide both price electricians at $50–$130 an hour; the saving from DIY is not worth the risk or a failed inspection.






