Weatherstripping Installation cost at a glance
- Typical range: $200 – $500
- Most homeowners pay: around $350
- Prices vary most by: Installation labor (50–65% of the budget)
Cross-checked against two published sources for this project. Sources used for this page: Angi's door weatherstripping cost guide, updated September 23, 2026 (national average $287 per door, most $133–$442; foam tape $35–$80, V-strip $40–$90, metal $100–$300 per door installed; standard single $35–$90, double $60–$150; labor $50–$150 an hour; professional installation $75–$200 per door; threshold work $150–$350; DIY kits from $60), HomeGuide's weather stripping installation cost guide (whole home $130–$470; $5–$10 per window and $35–$90 per door with professional installation; materials $0.16–$25.00 per linear foot; labor $50–$150 an hour) and CostOwl's weatherstripping installation cost data (whole home $200–$500; foam tape $0.20–$0.40, felt $0.50–$1, vinyl $0.70–$1.50 and rubber $1–$2 per linear foot; handyman $40–$60 an hour). Synthesized typical = CostOwl's whole-home band inside HomeGuide's, with $350 most-pay at Angi's replacement-guide average. Checked November 2026.. Sources last checked: October 2026 — HomeGuide, Angi. How we calculate these costs
Cost by scope

| Scope | Typical cost | What it includes |
|---|---|---|
| Budget — one door, basic materials | $35 – $90 | HomeGuide’s per-door band for a standard door with basic seals: foam tape or a simple compression strip, fitted. |
| Standard — whole home | $200 – $500 | The typical project on this page: CostOwl’s whole-home band, inside HomeGuide’s $130–$470 whole-home band — doors and windows sealed in one visit. |
| Premium — metal seals and threshold work | $500 – $970 | Bronze or metal seals with threshold repair: Angi prices premium materials with professional installation up to about $970 for a door, and threshold work at $150–$350. |
Where the money goes
| Part of the job | Share | Note |
|---|---|---|
| Sealing materials | 20–35% of total | HomeGuide prices weatherstripping materials at $0.16–$25.00 per linear foot, from foam tape at the bottom to metal seals at the top |
| Installation labor | 50–65% of total | Angi and HomeGuide both price installation labor at $50–$150 an hour, and most of a whole-home job is fitting, not material |
| Door sweeps and thresholds | 10–20% of total | Angi prices threshold work at $150–$350 where the bottom of the door needs more than a sweep |
| Removal of old seals and adjustment | 5–15% of total | Taking off failed stripping, cleaning the frames and adjusting a door that no longer sits square in its frame |

What moves the price most
Opening count is the first lever: HomeGuide prices weatherstripping at $5–$10 per window and $35–$90 per door with professional installation, so a home with three exterior doors and a dozen windows is a different job from a single leaky front door. Material is second: Angi prices foam tape at $35–$80 per door installed and V-strip at $40–$90, against metal seals at $100–$300 — foam is the cheapest seal and the shortest-lived, metal the dearest and the most durable. Door size and type are third: Angi prices a standard single door at $35–$90 against $60–$150 for a double door, and French or oversized entries take more material and more fitting time. Minimum fees are fourth: Angi’s replacement guide notes minimum service fees of $50–$100, so a one-door call costs more per door than the same door inside a whole-home visit. Worked example at the most-pay figure: sealing materials $100 + installation labor $200 + sweeps and threshold $50 = $350. For the doors themselves, see our exterior door replacement guide and our storm door installation guide, and to find the leaks first see our home energy audit guide.
Costs in your city
Labor is the biggest variable in any remodel, and labor is local — the same bathroom can price very differently in Houston than in Boston. We are adding city editions metro by metro, each with its own labor index, permit notes and climate factors, written for that city rather than copied from this page. Wave 1: Houston, Dallas–Fort Worth, Phoenix, Atlanta, Miami–South Florida, Orlando, Tampa, Charlotte, Austin and San Antonio. Until your city's page is live, use the national range here and weight it the way contractors do: Sun Belt labor often prices near or below the national middle, while coastal California and the Northeast metros often price well above it.

Frequently asked questions
How much does weatherstripping installation cost?
Typically $200–$500 for a whole home, with $350 the middle of the guides — Angi’s replacement average is $350 and CostOwl’s whole-home band is $200–$500.
How much does it cost to weatherstrip one door?
A basic door runs $35–$90 installed in HomeGuide’s tables; Angi’s professional per-door band runs $133–$442 when premium materials, prep and threshold work are included — the two bands describe different scopes, not a disagreement.
How much does it cost to weatherstrip a window?
About $5–$10 per window with professional installation in HomeGuide’s guide — windows are cheaper than doors because the perimeter is smaller and the seal is simpler.
Which weatherstripping material lasts longest?
Metal seals, at Angi’s $100–$300 per door installed: bronze and similar metals hold their shape where foam tape compresses and V-strip wears, which is why metal is the premium tier on this page.
Can I install weatherstripping myself?
Yes for foam tape and V-strip — Angi prices DIY materials at $10–$40 per door or window — while kerf-in seals, metal strips and threshold work are the jobs where a professional visit earns its $75–$200 per door.






