Home › Cost Guides › TV Mounting
Cost Guide

How Much Does TV Mounting Cost? (2026)

By Ahsan ul Haq · Last updated: 11 November 2026 · Planning estimate — not a quote · How we estimate

Typical range
$150 – $350
Most homeowners pay around $250 · Professional TV mounting typically costs $150 – $350 for a standard screen on drywall with the mount included, with about $250 the figure most jobs land near — Angi's 2026 data puts the national average at $149–$346, HomeAdvisor averages $255 inside $155–$355, and HomeGuide averages $275 with labor alone at $150–$400. This guide prices a pro mount-and-attach job — bracket, labor and setup — not the TV itself, and not a DIY bracket-only hang.
typical
$150$350
Low end = minor scope  ·  marker = typical middle  ·  high end = major scope. Add 10–20% contingency to any budget.
Living room with a wall-mounted TV above a fireplace, sofa and armchairs facing it

TV Mounting cost at a glance

  • Typical range: $150 – $350
  • Most homeowners pay: around $250
  • Prices vary most by: Installer labor (55–70% of the budget)

Cross-checked against three published sources for this project. Sources used for this page: Angi's TV mounting cost guide, updated September 28, 2026 (national average $149–$346; fixed mounts $20–$80, tilting $30–$100, full-motion $70–$250, ceiling $100–$300, specialty $150–$500; under 40 inches $120–$200, 41–60 inches $180–$300, 61 inches and up $250–$600; concealed wiring, soundbar brackets and fireplace mounting add $150–$300; DIY mounting two to four hours, pro one to two hours), HomeGuide's TV mount installation cost guide (national average $275, average range $165–$900 including mount, labor alone $150–$400, installers $75–$100 per hour, flat rates $150–$400; mount itself $15–$500) and HomeAdvisor's TV mounting guidance ($255 average, $155–$355 typical; drywall from $15 DIY kits, professional stone-wall work over $600). The page's typical band is the Angi–HomeAdvisor overlap at $150–$350, and its $250 most-pay figure sits near both published averages. Sources last checked: October 2026 — HomeAdvisor, HomeGuide, Angi. How we calculate these costs

Cost by scope

TV Mounting cost ranges by scope — chart of the table below
ScopeTypical costWhat it includes
Small screen, fixed mount, drywall$120 – $200The simple job: Angi prices under-40-inch screens at $120–$200 all-in, and a fixed mount itself at $20–$80 — studs found, bracket levelled, TV hung, cables left visible
Standard screen, tilting or full-motion mount — the typical job$150 – $350The shared band: Angi's $180–$300 for 41–60-inch screens against HomeGuide's $150–$400 labor band and HomeAdvisor's $155–$355 — a mid-size screen, a tilting or full-motion bracket, cable covers included
Large screen, fireplace, brick or stone, or hidden wiring$250 – $600The expensive end: Angi prices 61-inch-and-up screens at $250–$600, and fireplace or masonry mounting plus in-wall wiring adds $150–$300 — two-person handling, masonry anchors and rated in-wall cable

Where the money goes

Part of the jobShareNote
Installer labor55–70% of totalThe largest share: HomeGuide prices installers at $75–$100 an hour, and most pros charge a flat $150–$400 for the visit — a standard mount takes one to two hours
Mount and hardware15–30% of totalAngi prices fixed mounts at $20–$80, tilting at $30–$100 and full-motion at $70–$250 — the bracket is the part you keep, so weight rating matters more than brand
Cable management5–15% of totalSurface cable covers run $10–$50 in Angi's tables, and an in-wall power kit $40–$120 — the clean look is a separate line, not part of the hang
Setup and cleanup5–10% of totalConnecting the TV, levelling, a basic picture check and packing out — the part that turns a hung screen into a finished job
Installer labor · 55–70%Mount and hardware · 15–30%Cable management · 5–15%Setup and cleanup · 5–10%
Estimator’s note: on tv mounting, installer labor is usually where quotes swing most (55–70% of total of a typical budget). Ask every contractor to itemize that line in writing — totals are only comparable when that part is.
A wall-mounted screen in a bright office — the same bracket-and-labor job as a living room, with the mount type and wall material setting the price.
A wall-mounted screen in a bright office — the same bracket-and-labor job as a living room, with the mount type and wall material setting the price.

What moves the price most

Mount type is first: Angi prices fixed mounts at $20–$80, tilting at $30–$100, full-motion at $70–$250 and specialty or motorized mounts at $150–$500 — the bracket alone can double the bill. Screen size is second: Angi's size table runs $120–$200 under 40 inches, $180–$300 at 41–60 inches and $250–$600 at 61 inches and up, because big screens need heavier hardware and often a second pair of hands. Wall material is third: drywall on wood studs is the standard job, while brick, concrete, plaster, tile and stone take longer and need different anchors — and metal studs need special anchors of their own. Wiring is fourth: surface covers are cheap, in-wall concealment costs more, and cable hidden inside a wall must be CL2 or CL3 rated — a standard HDMI cable is not legal inside a wall cavity. For the room around the screen, see our home theater guide, for the power point it needs, see our outlet installation guide, and for another wall-mounted device, see our security camera guide.

Work out your quantities: before you compare quotes, run your measurements through our free remodeling calculators (paint, tile, concrete and flooring) — each one shows its formula and runs entirely in your browser.

Worked example: how a typical tv mounting budget breaks down

Take the typical job — a standard 55-inch screen on drywall: a full-motion mount, cable covers, setup and a level check. Here is a realistic $250 version of that invoice: The budget below totals $250 — the "most homeowners pay around" figure from the top of this page — split using this page's own cost breakdown. It shows how a real quote at that level is usually composed; every line is built from the ranges on this page, and it is an illustration, not a quote for your project.

Line itemExample budget
Installer labor$150
Full-motion mount and hardware$60
Cable covers and routing$25
Setup, levelling and cleanup$15
Total$250

What most people get wrong

  • Buying a mount rated below the TV weight — the rating is the safety line, and an undersized bracket is a screen on the floor, not a saving.
  • Mounting into drywall without hitting studs — anchors alone do not hold a large screen, and a pull-out takes wall and TV with it.
  • Running a standard HDMI cable inside the wall — in-wall cable must be CL2 or CL3 rated, and the non-rated shortcut is a code failure, not a bargain.
  • Mounting above a fireplace without checking heat and height — heat at the screen and a neck-craning angle are both discovered after the holes are drilled.

Costs in your city

TV mounting is installer-labor pricing around a bracket: the same standard job quotes near the bottom of the band where handyperson rates are low and toward the top in a high-cost metro, while the bracket ships nationally. Wall stock travels with the city — brick and plaster markets price above drywall markets, and fireplace mounting clusters where fireplaces do. Ask each bidder whether the bracket is included, what the wall material adds, and whether wiring is surface or in-wall.

How this estimate was built: TV mounting figures were cross-checked across Angi’s TV mounting cost guide, HomeGuide’s TV mount installation cost guide and HomeAdvisor’s TV mounting guidance. Angi publishes a $149–$346 national average with fixed mounts at $20–$80, tilting at $30–$100 and full-motion at $70–$250, HomeGuide publishes a $275 average with labor alone at $150–$400 and installers at $75–$100 an hour, and HomeAdvisor publishes a $255 average inside $155–$355 — so the typical band is drawn on the Angi–HomeAdvisor overlap, and large-screen, fireplace and masonry work is tiered separately. Checked November 2026. Full method: How We Estimate Costs.
The room the screen serves — viewing distance and seating layout decide mount height and screen size, which is why size bands, not just the bracket, move the quote.
The room the screen serves — viewing distance and seating layout decide mount height and screen size, which is why size bands, not just the bracket, move the quote.

Frequently asked questions

How much does it cost to mount a TV?

Angi's 2026 data puts the national average at $149–$346, HomeAdvisor averages $255 inside $155–$355, and HomeGuide averages $275. This page's typical band is $150–$350, with about $250 the figure most standard jobs land near.

Does the price include the mount?

Usually yes for a quoted mount-and-attach job, but not always — HomeGuide prices labor alone at $150–$400, so confirm whether the bracket is included before comparing quotes. A bracket you already own drops the job to labor only.

Can a TV be mounted on brick or above a fireplace?

Yes, and both cost more: masonry needs special anchors and more time, and Angi adds $150–$300 for fireplace mounting and concealed wiring. Above a fireplace, also check heat at the screen height and whether the viewing angle stays comfortable.

How long does TV mounting take?

A pro typically finishes in one to two hours on drywall with wood studs. Masonry, in-wall wiring and large screens take longer, and a first-time DIY mount commonly takes two to four hours.

Is hidden wiring worth the extra cost?

For a clean wall, yes — but only with CL2 or CL3 rated cable inside the wall, which is a code requirement, not a preference. Surface covers at $10–$50 are the cheaper honest alternative when the wall cannot be opened.

Before you sign: get the bracket type and weight rating in writing, confirm whether the mount and wiring are included, ask what wall material the quote assumes, and keep a 10–20% contingency separate from the contract price.

Ahsan ul Haq — Editor, Remodel Cost Hub

Ahsan compiles and edits the cost guides on Remodel Cost Hub, cross-checking every range against at least three published sources before it is published — the full method is on our Methodology page. Spot an error on this page? Send a correction.

TV Mounting cost range graphic
Save this range for later: Pin it on Pinterest

Related cost guides

Wooden staircase with an ornate iron railing in a modern home interior

Stair Replacement Cost

$2,000 – $7,000

Stair replacement typically costs $2,000 – $7,000, with about $3,500 the most-pay figure — HomeGuide prices a standard replacement at $2,000–$7,000, Angi prices a full replacement at $2,000–$10,000, and Fixr's benchmark for a professionally installed red-oak straight staircase with 10 risers and two handrails is $3,563. The $3,500 most-pay figure is that Fixr benchmark rounded; a straight softwood staircase lands below it and a curved or spiral design lands far above it.

Interior staircase with a wood handrail and black metal balusters

Stair Railing Installation Cost

$900 – $3,000

Stair railing installation typically costs $900 – $3,000 for a standard straight flight with a full railing system — handrail, balusters and newel posts — with about $2,500 the figure most jobs land near — Angi's national average is $2,500 inside its $900–$6,000 most-pay band, and its straight-flight band is $900–$3,000. This guide covers interior stair railings; deck and porch railings are a separate job, covered in our deck railing guide.

Low-angle view looking up a modern wooden spiral staircase with black metal rails, toward a wood-panelled ceiling with a ceiling fan

Spiral Staircase Installation Cost

$3,000 – $15,000

A standard 5-foot-diameter indoor spiral staircase, about 10 feet tall — kit or mid-range custom, installed with permits and finishing

White built-in mudroom lockers with a wooden bench and cubbies

Mudroom Remodel Cost

$6,000 – $15,000

A mudroom remodel typically costs $6,000 – $15,000, with about $10,000 the most-pay figure — Angi's remodel band is $6,000–$15,000 with a $10,000 average, and its addition band for the same room is $6,500–$18,000 with a $12,000 average. The $10,000 most-pay figure is the remodel average; converting a closet or garage entry lands below it and building a new bump-out lands above it, at $50–$100 per sq ft for a conversion against $100–$300 per sq ft for an addition on Angi's figures.

A modern entryway with white built-in shelving on both sides, a brick wall, a cushioned bench and a dark front door

Mudroom Addition Cost

$6,500 – $18,000

Building a new mudroom addition onto the house — a small bump-out with its own foundation, framing, roof tie-in and built-in storage, at $100–$300 per square foot

A living room with a lit fireplace in a dark-panelled wall

Pellet Stove Installation Cost

$1,600 – $4,100

Pellet stove installation typically costs $1,600 – $4,100, with about $2,300 the figure most freestanding jobs land near — HomeGuide prices a freestanding pellet stove at $1,600–$4,100 installed with the unit at $900–$2,600 and labor at $700–$1,500; Angi averages $2,327 across 466 verified projects with most homeowners paying $1,009–$3,667; and Bob Vila puts the typical range at $1,036–$3,550 with a $2,293 average. The $1,600–$4,100 typical band is HomeGuide's freestanding range, which sits inside both other guides' bands, and $2,300 is the rounded midpoint of Angi's $2,327 and Bob Vila's $2,293 averages.