Home › Cost Guides › Stair Replacement
Cost Guide

How Much Does a Stair Replacement Cost? (2026)

By Ahsan ul Haq · Last updated: 11 November 2026 · Planning estimate — not a quote · How we estimate

Typical range
$2,000 – $7,000
Most homeowners pay around $3,500 · Stair replacement typically costs $2,000 – $7,000, with about $3,500 the most-pay figure — HomeGuide prices a standard replacement at $2,000–$7,000, Angi prices a full replacement at $2,000–$10,000, and Fixr's benchmark for a professionally installed red-oak straight staircase with 10 risers and two handrails is $3,563. The $3,500 most-pay figure is that Fixr benchmark rounded; a straight softwood staircase lands below it and a curved or spiral design lands far above it.
typical
$2,000$7,000
Low end = minor scope  ·  marker = typical middle  ·  high end = major scope. Add 10–20% contingency to any budget.
Wooden staircase with an ornate iron railing in a modern home interior

Stair Replacement cost at a glance

  • Typical range: $2,000 – $7,000
  • Most homeowners pay: around $3,500
  • Prices vary most by: Treads, risers, stringers and railing materials (35–50% of the budget)

Cross-checked against five published sources for this project. Sources used for this page: Angi's stair repair cost guide (2026, updated September 4, 2026: national average repair $2,046, most $952–$3,234; full stair replacement $2,000–$10,000 against repairs at $300–$1,500; per-step repair pricing $60–$250; tread replacement $200–$600, railing repair $250–$1,000, structural repairs $1,000–$5,000, landing repair $400–$1,200, refinishing $300–$1,200; carpenters $40–$100 per hour, general contractors $70–$150, stair specialists $100–$200 or more; demolition and prep $100–$400, junk removal $100–$300; permits $50–$250; structural engineer $300–$800; painting or staining $200–$600 or $2–$6 per square foot; hardwood stair installation $100–$300 per step, overall $750–$30,000 with a $2,400 average project), HomeAdvisor's 2026 staircase cost guide (replace stairs and railings $1,000–$10,000; build a new staircase or railings around $1,900 on average; interior hardwood stairs $4,000 on average; spiral staircase $10,400 on average; stair railing installation $900 on average up to $10,000, wrought iron railings $2,600 on average; balusters or spindles $1,200–$1,600 on average, $3–$17 each before installation; treads or risers $1,800–$2,500; hardwood treads $35–$50 each, thick treads up to about $160) and Fixr's interior staircase cost data as summarized by ThePricer (interior staircase installation $2,000–$5,000, benchmark $3,563 for a professionally installed red-oak straight staircase with 10 risers and two handrails; HomeGuide's replacement band $2,000–$7,000 and remodel band $500–$4,000 cited in the same summary). Sources last checked: October 2026 — HomeAdvisor, HomeGuide, Fixr, Angi, ThePricer. How we calculate these costs

Cost by scope

Stair Replacement cost ranges by scope — chart of the table below
ScopeTypical costWhat it includes
Treads, risers and balusters only — new surfaces on the existing structure$1,200 – $2,500The cheap end: HomeAdvisor prices replacing treads or risers at $1,800–$2,500 and balusters or spindles at $1,200–$1,600 on average, and Angi prices replacing individual steps at $200–$600 each — this tier only works where the stringers and framing are sound
Typical replacement — a standard straight staircase, new structure and railing$2,000 – $7,000The shared band itself: HomeGuide's $2,000–$7,000 replacement band, inside Angi's $2,000–$10,000 full-replacement band and HomeAdvisor's $1,000–$10,000 stairs-and-railings band, covering removal, new stringers, treads, risers and a standard handrail
Custom, curved or spiral — structural rebuild or a new design$10,000 – $30,000The expensive end: HomeAdvisor prices a spiral staircase at $10,400 on average, and EngineerFix prices a full structural replacement or custom build at $10,000 to over $30,000 for complex designs — Angi prices hardwood stair installation up to $30,000 for premium custom work

Where the money goes

Part of the jobShareNote
Treads, risers, stringers and railing materials35–50% of totalHomeAdvisor prices hardwood stair treads at $35–$50 each before installation, with thick premium treads up to about $160, and individual balusters at $3–$17 before installation, while Angi prices hardwood stair installation at $100–$300 per step including materials and installation — species and railing metal or glass move this line most
Carpentry and installation labor30–45% of totalAngi prices carpenters at $40–$100 per hour, general contractors at $70–$150 and stair specialists at $100–$200 or more for curved or custom work, and notes labor can be 50% or more of a stair job — tight spaces and curved runs push labor up fastest
Demolition, disposal and finishing10–20% of totalAngi prices demolition and prep for stair work at $100–$400 with junk removal at $100–$300 on top where disposal is not included, and painting or staining after the build at $200–$600 total or $2–$6 per square foot
Permits, inspection and structural checks5–10% of totalAngi prices permits for structural stair repairs or configuration changes at $50–$250 with inspections for code compliance, and a structural engineer's assessment at $300–$800 where sagging or major framing damage is found — cosmetic component swaps usually need no permit
Treads, risers, stringers and railing materials · 35–50%Carpentry and installation labor · 30–45%Demolition, disposal and finishing · 10–20%Permits, inspection and structural checks · 5–10%
Estimator’s note: on a stair replacement, treads, risers, stringers and railing materials is usually where quotes swing most (35–50% of total of a typical budget). Ask every contractor to itemize that line in writing — totals are only comparable when that part is.
A newel post close-up like this one is the railing line of the page: HomeAdvisor prices balusters or spindles at $1,200–$1,600 on average and a railing installation at $900 on average, while Angi prices railing repair at $250–$1,000 — posts, balusters and the handrail are priced as components, not as a single lump sum
A newel post close-up like this one is the railing line of the page: HomeAdvisor prices balusters or spindles at $1,200–$1,600 on average and a railing installation at $900 on average, while Angi prices railing repair at $250–$1,000 — posts, balusters and the handrail are priced as components, not as a single lump sum

What moves the price most

Shape is the first driver: a straight run sits in the $2,000–$7,000 typical band, while HomeAdvisor prices a spiral at $10,400 on average and EngineerFix prices a full structural or custom build at $10,000–$30,000 or more — curves and spirals need specialist labor at $100–$200 per hour on Angi's figures. Material is second: Angi prices hardwood installation at $100–$300 per step, and HomeAdvisor prices plain hardwood treads at $35–$50 each against about $160 for thick premium treads, with glass or metal railings above wood. Size is third: Angi prices stair repair work at $60–$250 per step, so a 14-step flight costs materially more than a short basement run even in the same material. Structure decides repair versus replace: Angi prices structural repairs at $1,000–$5,000 and says replacement makes sense when repairs would exceed 50% of the replacement cost or when rot, termite damage or sagging is widespread — a staircase that only squeaks or needs new treads is a repair job, not a replacement. Railing scope closes the bill: HomeAdvisor prices a railing installation at $900 on average up to $10,000, with wrought iron at $2,600 on average, so a full new balustrade is a second project inside the first.

Work out your quantities: before you compare quotes, run your measurements through our free remodeling calculators (paint, tile, concrete and flooring) — each one shows its formula and runs entirely in your browser.

Costs in your city

Labor is the biggest variable in any remodel, and labor is local — the same bathroom can price very differently in Houston than in Boston. We are adding city editions metro by metro, each with its own labor index, permit notes and climate factors, written for that city rather than copied from this page. Wave 1: Houston, Dallas–Fort Worth, Phoenix, Atlanta, Miami–South Florida, Orlando, Tampa, Charlotte, Austin and San Antonio. Until your city's page is live, use the national range here and weight it the way contractors do: Sun Belt labor often prices near or below the national middle, while coastal California and the Northeast metros often price well above it.

How this estimate was built: the range on this page is a synthesis of at least three published industry sources (national cost guides and the Remodeling Magazine Cost vs. Value data among them), cross-checked in October 2026. We publish planning ranges, never a single pretend-precise price. Full method: How We Estimate Costs.
A straight wooden staircase seen from above like this one is the cheapest shape to replace: Angi prices a full replacement at $2,000–$10,000, while a spiral averages $10,400 on HomeAdvisor and a custom curved build runs $10,000–$30,000 or more on EngineerFix — shape, not just size, is what moves a staircase from the typical band to the custom tier
A straight wooden staircase seen from above like this one is the cheapest shape to replace: Angi prices a full replacement at $2,000–$10,000, while a spiral averages $10,400 on HomeAdvisor and a custom curved build runs $10,000–$30,000 or more on EngineerFix — shape, not just size, is what moves a staircase from the typical band to the custom tier

Frequently asked questions

How much does stair replacement cost?

Typically $2,000–$7,000, with about $3,500 the most-pay figure. HomeGuide prices a standard replacement at $2,000–$7,000, Angi prices a full replacement at $2,000–$10,000, and Fixr's benchmark for a red-oak straight staircase with 10 risers and two handrails is $3,563 — the three sources agree on this page's band.

Should I repair my stairs or replace them?

Repair if the damage is isolated or cosmetic: Angi prices stair repairs at $300–$1,500 against $2,000–$10,000 for a full replacement, and says replacement makes sense when repairs would exceed 50% of the replacement cost or when rot, termite damage or sagging is widespread. A single broken tread at $200–$600 (Angi) is a repair; a sagging stringer is usually a replacement.

How much does stair replacement cost per step?

Angi prices hardwood stair installation at $100–$300 per step including materials and installation, and stair repair work at $60–$250 per step. On materials alone, HomeAdvisor prices hardwood treads at $35–$50 each, with thick premium treads up to about $160, and balusters at $3–$17 each before installation.

Do I need a permit to replace stairs?

For structural work or a configuration change, usually yes: Angi prices permits at $50–$250 with inspections for code compliance, and a structural engineer's assessment at $300–$800 where sagging or major framing damage is found. Swapping treads or a handrail on a sound structure usually needs no permit — confirm with the local building department before work starts.

How much does a spiral or curved staircase cost?

Far more than a straight run: HomeAdvisor prices a spiral staircase at $10,400 on average, and EngineerFix prices a full structural replacement or custom build at $10,000 to over $30,000 for complex designs. Angi prices hardwood stair installation up to $30,000 for premium custom work, with stair specialists at $100–$200 per hour or more.

Before you sign: get at least 3 written local quotes for the same written scope, confirm permits and who pulls them, and keep a 10–20% contingency separate from the contract price.

Ahsan ul Haq — Editor, Remodel Cost Hub

Ahsan compiles and edits the cost guides on Remodel Cost Hub, cross-checking every range against at least three published sources before it is published — the full method is on our Methodology page. Spot an error on this page? Send a correction.

Stair Replacement cost range graphic
Save this range for later: Pin it on Pinterest

Related cost guides

Interior staircase with a wood handrail and black metal balusters

Stair Railing Installation Cost

$900 – $3,000

Stair railing installation typically costs $900 – $3,000 for a standard straight flight with a full railing system — handrail, balusters and newel posts — with about $2,500 the figure most jobs land near — Angi's national average is $2,500 inside its $900–$6,000 most-pay band, and its straight-flight band is $900–$3,000. This guide covers interior stair railings; deck and porch railings are a separate job, covered in our deck railing guide.

Low-angle view looking up a modern wooden spiral staircase with black metal rails, toward a wood-panelled ceiling with a ceiling fan

Spiral Staircase Installation Cost

$3,000 – $15,000

A standard 5-foot-diameter indoor spiral staircase, about 10 feet tall — kit or mid-range custom, installed with permits and finishing

White built-in mudroom lockers with a wooden bench and cubbies

Mudroom Remodel Cost

$6,000 – $15,000

A mudroom remodel typically costs $6,000 – $15,000, with about $10,000 the most-pay figure — Angi's remodel band is $6,000–$15,000 with a $10,000 average, and its addition band for the same room is $6,500–$18,000 with a $12,000 average. The $10,000 most-pay figure is the remodel average; converting a closet or garage entry lands below it and building a new bump-out lands above it, at $50–$100 per sq ft for a conversion against $100–$300 per sq ft for an addition on Angi's figures.

A modern entryway with white built-in shelving on both sides, a brick wall, a cushioned bench and a dark front door

Mudroom Addition Cost

$6,500 – $18,000

Building a new mudroom addition onto the house — a small bump-out with its own foundation, framing, roof tie-in and built-in storage, at $100–$300 per square foot

A living room with a lit fireplace in a dark-panelled wall

Pellet Stove Installation Cost

$1,600 – $4,100

Pellet stove installation typically costs $1,600 – $4,100, with about $2,300 the figure most freestanding jobs land near — HomeGuide prices a freestanding pellet stove at $1,600–$4,100 installed with the unit at $900–$2,600 and labor at $700–$1,500; Angi averages $2,327 across 466 verified projects with most homeowners paying $1,009–$3,667; and Bob Vila puts the typical range at $1,036–$3,550 with a $2,293 average. The $1,600–$4,100 typical band is HomeGuide's freestanding range, which sits inside both other guides' bands, and $2,300 is the rounded midpoint of Angi's $2,327 and Bob Vila's $2,293 averages.

A straight wooden staircase with an ornate metal rail

Stair Lift Installation Cost

$2,000 – $9,000

Stair lift installation typically costs $2,000 – $9,000, with about $7,000 the figure most straight jobs land near — Angi prices a straight lift at $2,000–$9,000 with a $7,050 average for straight models, Bob Vila puts the national average at $6,000 with a typical $2,000–$20,000 band, and Harmar prices many new straight installs at about $4,000–$5,000. The $2,000–$9,000 typical band is the standard straight lift, and $7,000 is Angi's $7,050 straight average rounded; curved and custom rails are a different job entirely at $9,000–$20,000 on Angi, and premium or outdoor curved work can reach $30,000.