Stair Railing Installation cost at a glance
- Typical range: $900 – $3,000
- Most homeowners pay: around $2,500
- Prices vary most by: Handrail, balusters and newel posts (40–50% of the budget)
Cross-checked against three published sources for this project. Sources used for this page: Angi's stair railing cost guide, updated October 16, 2026 (professional installation $900–$6,000, national average $2,500; straight $900–$3,000, L-shaped $1,200–$4,500, U-shaped $2,000–$5,500, curved or spiral $2,400–$6,000; wood $50–$200 and glass $200–$650 per linear foot in its type table; permits $150–$500); HomeGuide's stair railing guide (total installed $500–$6,300; labor $300–$1,000 for an average 25-linear-foot project; wood $20–$60, aluminum $50–$200, stainless steel $50–$250, wrought iron $65–$135, cable $60–$500 and glass $100–$600 per linear foot installed); Bob Vila's stair railing replacement guide (typical $200–$10,000, national average $900 for about 25 feet, Angi and HomeAdvisor based; glass $100–$500 per linear foot). Typical band = Angi's straight-flight band; most-pay = Angi's published average. Note: Angi and HomeGuide disagree on wood per linear foot ($50–$200 vs $20–$60) — both are published on the page rather than averaged.. Sources last checked: October 2026 — HomeAdvisor, HomeGuide, Angi. How we calculate these costs
Cost by scope

| Scope | Typical cost | What it includes |
|---|---|---|
| Handrail-only replacement, simple wood rail | $500 – $1,200 | The cheap end: HomeGuide prices a full stair railing job from $500, so swapping a handrail alone — or a plain pine rail on a short straight flight — lands here, with balusters and posts untouched |
| Standard straight flight, wood or metal system — the typical job | $900 – $3,000 | The shared band itself: Angi's straight-flight $900–$3,000 against HomeGuide's $500–$6,300 full range — a complete system in wood at $20–$60 per linear foot installed, or metal at $50–$250, on one straight run |
| L-shaped, U-shaped, curved, glass or cable system | $3,000 – $6,500 | The expensive end: Angi prices L-shaped flights at $1,200–$4,500, U-shaped at $2,000–$5,500 and curved or spiral at $2,400–$6,000, while HomeGuide prices glass at $100–$600 per linear foot installed — more railing, more fittings, and premium infill |
Where the money goes
| Part of the job | Share | Note |
|---|---|---|
| Handrail, balusters and newel posts | 40–50% of total | The system itself: HomeGuide prices wood at $20–$60, aluminum at $50–$200, stainless steel at $50–$250, wrought iron at $65–$135, cable at $60–$500 and glass at $100–$600 per linear foot installed — material choice is the tier |
| Installation labor | 25–35% of total | The fitting: HomeGuide prices labor at $300–$1,000 for an average 25-linear-foot project — measuring, cutting angles, anchoring posts and setting balusters plumb on the rake |
| Removal of the old railing and repairs | 10–20% of total | The teardown: pulling the old system, patching the stringer and wall where it was anchored, and repairing any stair damage the old railing was hiding |
| Finishing, permits and extras | 5–10% of total | The tail: staining or painting a wood rail, and permits where the locality requires them — Angi prices permits at $150–$500 on railing jobs |

What moves the price most
Material is the first driver, and the guides disagree on wood. HomeGuide prices wood at $20–$60 per linear foot installed, while Angi's type table puts wood at $50–$200 — the two guides measure different grades and scopes, so compare quotes on the same wood and the same included hardware. Metal sits at $50–$250 (HomeGuide: stainless $50–$250, wrought iron $65–$135), cable at $60–$500 and glass at $100–$600. Layout is second: Angi's table runs from $900–$3,000 for a straight flight to $2,400–$6,000 for curved or spiral, because every turn adds posts, fittings and angled cuts. Length is third: HomeGuide's average project is about 25 linear feet, so a long run or a railing that continues along a landing costs more per foot of the same material. Finally, code: handrail height and baluster spacing are set by code, not taste — a railing that looks right but fails inspection is a redo, which is why the permits line exists. For the staircase itself rather than its railing, see our stair replacement guide.
Costs in your city
Labor is the biggest variable in any remodel, and labor is local — the same bathroom can price very differently in Houston than in Boston. We are adding city editions metro by metro, each with its own labor index, permit notes and climate factors, written for that city rather than copied from this page. Wave 1: Houston, Dallas–Fort Worth, Phoenix, Atlanta, Miami–South Florida, Orlando, Tampa, Charlotte, Austin and San Antonio. Until your city's page is live, use the national range here and weight it the way contractors do: Sun Belt labor often prices near or below the national middle, while coastal California and the Northeast metros often price well above it.

Frequently asked questions
How much does it cost to install a stair railing?
Typically $900–$3,000 for a standard straight flight with a full system, with about $2,500 the figure most jobs land near — Angi's national average of $2,500 inside its $900–$6,000 band, and its straight-flight band is $900–$3,000.
Wood, metal, cable or glass — what does each cost per foot?
HomeGuide's installed bands: wood $20–$60, aluminum $50–$200, stainless steel $50–$250, wrought iron $65–$135, cable $60–$500 and glass $100–$600 per linear foot. Angi's type table puts wood higher, at $50–$200, and glass at $200–$650 — so a wood quote that looks expensive against HomeGuide may simply be quoting a higher grade or a fuller scope.
Can I replace just the handrail and keep the balusters?
Often, if the posts and balusters are sound and the new rail matches their spacing and style — a handrail-only job is the $500–$1,200 tier in this guide. Where the old system is loose, out of code on spacing, or a different style entirely, a full system replacement is cheaper than forcing a new rail onto old bones.
Do I need a permit for a stair railing?
Sometimes: Angi prices permits at $150–$500 on railing jobs, and whether one is required depends on your locality and whether the work is a like-for-like swap or part of a larger remodel. A contractor who pulls permits where required is worth more than one who skips them — an unpermitted railing can fail a later inspection.
Is stair railing installation a DIY job?
A straight wood handrail on a simple flight is DIY-able for a careful homeowner, but the job lives or dies on angles, anchoring and code: posts must hold, baluster spacing must pass, and the rail must be continuous and graspable. Most homeowners hire the full system out — HomeGuide prices labor at $300–$1,000 for an average 25-foot project — and keep DIY to a handrail-only swap.
What if my stairs are curved or L-shaped?
Budget higher: Angi prices L-shaped flights at $1,200–$4,500, U-shaped at $2,000–$5,500 and curved or spiral at $2,400–$6,000, against $900–$3,000 for a straight flight. Every turn adds newel posts, angled fittings and custom-bent rail, which is why a curved railing is priced as a different job, not a straight flight plus a little extra.






