Home › Cost Guides › Sewer Camera Inspection
Cost Guide

How Much Does a Sewer Camera Inspection Cost? (2026)

By Ahsan ul Haq · Last updated: 11 November 2026 · Planning estimate — not a quote · How we estimate

Typical range
$125 – $500
Most homeowners pay around $280 · A sewer camera inspection typically costs $125 – $500 for a standard home with cleanout access, with about $280 the figure most inspections land near — HomeGuide averages $280 inside $125–$500, Angi averages $995 inside a $271–$1,725 most-pay band that includes complex-access jobs, and iBuyer puts the standard cleanout scope at $250–$500. This guide prices the inspection alone — camera run, video and written report — not the repair it may find, and not a new cleanout, which is priced separately.
typical
$125$500
Low end = minor scope  ·  marker = typical middle  ·  high end = major scope. Add 10–20% contingency to any budget.
Close view of gray PVC pipe ends with water droplets

Sewer Camera Inspection cost at a glance

  • Typical range: $125 – $500
  • Most homeowners pay: around $280
  • Prices vary most by: Technician labor (55–70% of the budget)

Cross-checked against two published sources for this project. Sources used for this page: HomeGuide's sewer camera inspection cost guide (average range $125–$500, national average $280; cleanout access $125–$500, no cleanout $175–$750, bundled with a home inspection $100–$250, full home plus sewer inspection $400–$750; snaking $200–$500 and hydro jetting $600–$1,400 as separate cleaning), Angi's sewer line camera inspection guide, updated September 30, 2026 (national average $995 across 2,344 verified projects, most $271–$1,725; PVC $175–$300, cast iron $250–$400, Orangeburg to $800; standard camera $180–$350, HD $350–$710, specialty $710–$1,770 or more; add-ons $150–$800; hourly $75–$150 where hourly) and iBuyer's sewer line inspection guide (standard cleanout scope $250–$500; no-cleanout toilet-entry $185–$450; new cleanout installation $500–$1,500 pushing totals to $700–$2,000 or more; Angi's $996 average explained as including complex-access jobs). The page's typical band is HomeGuide's average range, and its $280 most-pay figure is HomeGuide's published average; Angi's higher average is published as reflecting complex-access work, not averaged away. Sources last checked: October 2026 — HomeGuide, Angi. How we calculate these costs

Cost by scope

Sewer Camera Inspection cost ranges by scope — chart of the table below
ScopeTypical costWhat it includes
Bundled with a home inspection, cleanout access$100 – $250HomeGuide's add-on band — the inspector is already on site, so the camera run is the extra, not a second visit
Standalone inspection, cleanout access — the typical job$125 – $500The shared band: HomeGuide's $125–$500 average range against iBuyer's $250–$500 standard scope — camera run, video and report for a standard lateral
No cleanout, toilet-entry or long and complex line$175 – $750HomeGuide's no-cleanout band — the toilet is pulled and reset for access; Angi's specialty-camera and long-line work runs higher still, and a brand-new cleanout adds $500–$2,000 on top

Where the money goes

Part of the jobShareNote
Technician labor55–70% of totalThe largest share: Angi prices hourly inspection work at $75–$150 an hour where hourly, but most inspections are a flat fee covering the run and the report
Camera equipment use15–25% of totalStandard, HD and specialty cameras price differently — Angi's type ladder runs $180–$350 standard, $350–$710 HD and $710–$1,770 or more for specialty rigs
Video and written report5–15% of totalThe recording and the written findings with locations — the document a repair quote is built from, so confirm it is included
Travel and setup5–10% of totalGetting the rig to the cleanout, protecting the work area and resetting access — the small line on every flat fee
Technician labor · 55–70%Camera equipment use · 15–25%Video and written report · 5–15%Travel and setup · 5–10%
Estimator’s note: on a sewer camera inspection, technician labor is usually where quotes swing most (55–70% of total of a typical budget). Ask every contractor to itemize that line in writing — totals are only comparable when that part is.
Pipe stock by material — the lateral's material is a pricing factor in every guide, which is why a camera quote asks what your line is made of before it quotes.
Pipe stock by material — the lateral's material is a pricing factor in every guide, which is why a camera quote asks what your line is made of before it quotes.

What moves the price most

Access is first: a home with a cleanout inspects at $125–$500 in HomeGuide's tables, a home without one at $175–$750 because the toilet must be pulled and reset, and a home needing a brand-new cleanout adds $500–$1,500 before the camera even runs. Line length is second: Angi's length tables run roughly $150–$300 under 50 feet, $300–$600 at 50–100 feet and $600–$1,200 over 100 feet. Pipe material is third: Angi's material table prices PVC at $175–$300, cast iron at $250–$400 and rare Orangeburg fiber pipe up to $800, because rougher and more fragile lines need advanced cameras. Camera type is fourth: a standard camera gives a live view, an HD camera adds recording and a report, and a 360-degree or self-levelling specialty camera is the top tier. For the repair the camera may find, see our sewer line replacement guide, for cleaning, see our drain cleaning guide, and for the inspection it often rides with, see our home inspection guide.

Work out your quantities: before you compare quotes, run your measurements through our free remodeling calculators (paint, tile, concrete and flooring) — each one shows its formula and runs entirely in your browser.

Worked example: how a typical sewer camera inspection budget breaks down

Take the typical job — a standard home with cleanout access: camera run through the lateral, video recorded, written report with findings and locations. Here is a realistic $280 version of that invoice: The budget below totals $280 — the "most homeowners pay around" figure from the top of this page — split using this page's own cost breakdown. It shows how a real quote at that level is usually composed; every line is built from the ranges on this page, and it is an illustration, not a quote for your project.

Line itemExample budget
Technician labor, camera run$180
Camera equipment use$60
Video and written report$25
Travel and setup$15
Total$280

What most people get wrong

  • Paying for an inspection when you already know the problem — a visible backup or a known break needs a repair quote, and the camera fee buys a second opinion, not the fix.
  • Comparing a cleanout-access quote with a toilet-entry quote on the total — access is the biggest cost variable, and only the access type makes two quotes comparable.
  • Assuming the inspection includes cleaning — snaking and hydro jetting are separate jobs at $200–$500 and $600–$1,400 in HomeGuide’s tables, and a camera-only visit leaves the line exactly as found.
  • Skipping the written report — the video alone does not price a repair, and the report with locations is what the next contractor quotes from.

Costs in your city

Sewer camera inspection is technician-labor pricing around a camera rig: the same standard scope quotes near the bottom of the band where plumber rates are low and toward the top in a high-cost metro, while the rig travels with the technician. Housing stock travels with the city — older neighbourhoods carry more cast-iron and Orangeburg laterals, which need advanced cameras, and tree-lined streets bring more root intrusion into the frame. Ask each bidder for the access type, the camera type, and whether the video and written report are included.

How this estimate was built: sewer camera inspection figures were cross-checked across HomeGuide’s sewer camera inspection cost guide, Angi’s sewer line camera inspection guide and iBuyer’s sewer line inspection guide. HomeGuide publishes a $125–$500 average range with a $280 average, cleanout access at $125–$500 and no-cleanout access at $175–$750, Angi publishes a $995 average inside a $271–$1,725 most-pay band with PVC at $175–$300, cast iron at $250–$400 and Orangeburg to $800, and iBuyer publishes a standard cleanout scope at $250–$500 with new-cleanout totals at $700–$2,000 or more — so the typical band is drawn on HomeGuide’s average range, and complex-access work is tiered separately. Checked November 2026. Full method: How We Estimate Costs.
Older metal pipe stock — rougher inside than PVC, which is why Angi prices cast-iron inspections at $250–$400 against $175–$300 for PVC. The photo shows metal pipes generally, not a certified material.
Older metal pipe stock — rougher inside than PVC, which is why Angi prices cast-iron inspections at $250–$400 against $175–$300 for PVC. The photo shows metal pipes generally, not a certified material.

Frequently asked questions

How much does a sewer camera inspection cost?

HomeGuide averages $280 inside a $125–$500 range for a standard home with cleanout access. Angi's $995 average sits inside a $271–$1,725 most-pay band because it includes complex-access jobs — this page's typical band is $125–$500, with about $280 the figure most standard inspections land near.

What does a sewer camera inspection include?

A camera run through the lateral, a live view and usually a video recording with a written report of what was found and where. It does not include repairs or drain cleaning — snaking and hydro jetting are separate jobs.

Do I need a cleanout for a sewer camera inspection?

No, but it changes the price: with a cleanout the camera goes straight in, without one the plumber pulls and resets a toilet for access, and if neither works a new cleanout must be cut in first at $500–$1,500 or more.

How long does a sewer camera inspection take?

A standard single-family inspection with cleanout access commonly runs 30 to 60 minutes of camera time, plus setup and reporting. Long lines, blockages and no-cleanout access extend it.

When should I get a sewer camera inspection?

Before buying an older home, when backups recur, when trees stand over the line, or every one to two years as preventive maintenance in Angi's guidance — a few hundred dollars of inspection against a repair bill in the thousands.

Before you sign: confirm the access type in writing, get the camera type and report included, ask whether the fee credits toward any repair, keep the video and report for repair quotes, and keep a 10–20% contingency separate from the contract price.

Ahsan ul Haq — Editor, Remodel Cost Hub

Ahsan compiles and edits the cost guides on Remodel Cost Hub, cross-checking every range against at least three published sources before it is published — the full method is on our Methodology page. Spot an error on this page? Send a correction.

Sewer Camera Inspection cost range graphic
Save this range for later: Pin it on Pinterest

Related cost guides

Room with a collapsed ceiling, hanging panels and debris on the floor

Ceiling Repair Cost

$300 – $1,200

Ceiling repair typically costs $300 – $1,200, with about $700 the most-pay figure — HomeGuide puts the national average at $700 on a $300–$1,200 average range, Angi puts the average at $450–$1,750, and This Old House prices a drywall ceiling hole repair at $320–$1,300. The $700 most-pay figure is HomeGuide's national average; a small patch lands below it and water-damaged or structural work lands above it.

Room with peeling floral wallpaper, damaged patches and armchairs

Wallpaper Removal Cost

$400 – $1,200

Wallpaper removal typically costs $400 – $1,200, with about $800 the most-pay figure — Angi puts the average at $793 with most homeowners paying $423–$1,192, HomeGuide prices common stripping and steaming at $0.80–$3 per square foot (about $320–$1,200 for 400 square feet of wall), and Fixr prices removal labor at $0.75–$2 per square foot. The $800 most-pay figure is Angi's $793 average rounded; an easy single room lands below it and multi-layer or unprimed walls land above it.

Finished attic bedroom with a wood plank ceiling, brick gable wall, round window and skylights

Attic Conversion Cost

$25,000 – $50,000

Attic conversion typically costs $25,000 – $50,000 for a finished bedroom or office, with about $35,000 the most-pay figure — This Old House prices a simple bedroom conversion at $30,000–$50,000, Angi prices bedrooms at $9,000–$65,000 and offices at $10,000–$40,000, and HomeGuide prices finishing an attic into living space at $25,000–$75,000. The $35,000 most-pay figure sits in the bedroom overlap; a storage-only finish lands far below it and a primary suite with a bathroom lands far above it.

Woman sorting laundry beside a front-loading washer in a bright laundry area

Laundry Room Remodel Cost

$6,000 – $17,000

Laundry room remodel typically costs $6,000 – $17,000, with about $11,000 the most-pay figure — Angi puts the national average at $11,000 with most homeowners paying $6,000–$17,000, and Block Renovation puts typical projects at $6,000–$10,000 inside that band. The $11,000 most-pay figure is Angi's average; a cosmetic refresh lands far below it and a relocation or luxury finish lands far above it.

Home office corner desk with a monitor, printer, desk lamp and wall shelves with wicker baskets

Home Office Remodel Cost

$5,000 – $20,000

Home office remodel typically costs $5,000 – $20,000 for converting an existing room of about 100 square feet, with about $15,000 the most-pay figure — Angi puts the national average at $15,000 with most homeowners spending $2,000–$22,000, and prices a 10-by-10-foot conversion at $5,000–$20,000. The $15,000 most-pay figure is Angi's average across conversions and additions; a spare-room refresh lands far below it and a custom build-out or addition lands far above it.

A bright remodeled bedroom with a white bed, blue and patterned pillows, a wood bench at the foot of the bed, a patterned rug and a ceiling fan with a light

Bedroom Remodel Cost

$12,000 – $28,000

Remodeling an existing bedroom — new flooring, paint, lighting and furnishings, with minor layout changes, at $100–$200 per square foot