Home › Cost Guides › Wallpaper Removal
Cost Guide

How Much Does a Wallpaper Removal Cost? (2026)

By Ahsan ul Haq · Last updated: 11 November 2026 · Planning estimate — not a quote · How we estimate

Typical range
$400 – $1,200
Most homeowners pay around $800 · Wallpaper removal typically costs $400 – $1,200, with about $800 the most-pay figure — Angi puts the average at $793 with most homeowners paying $423–$1,192, HomeGuide prices common stripping and steaming at $0.80–$3 per square foot (about $320–$1,200 for 400 square feet of wall), and Fixr prices removal labor at $0.75–$2 per square foot. The $800 most-pay figure is Angi's $793 average rounded; an easy single room lands below it and multi-layer or unprimed walls land above it.
typical
$400$1,200
Low end = minor scope  ·  marker = typical middle  ·  high end = major scope. Add 10–20% contingency to any budget.
Room with peeling floral wallpaper, damaged patches and armchairs

Wallpaper Removal cost at a glance

  • Typical range: $400 – $1,200
  • Most homeowners pay: around $800
  • Prices vary most by: Removal labor (60–80% of the budget)

Cross-checked against three published sources for this project. Sources used for this page: Angi's wallpaper removal cost guide (national average $793 from 1,900 verified projects, most homeowners $423–$1,192, $0.60–$3 per square foot; by method stripping $0.60–$1.50, steaming $1–$3, soaking and scraping $1–$2; labor $40–$80 per hour; wall repairs after removal $150–$1,000; nonporous vinyl and multi-layered paper take longer than porous paper), HomeGuide's wallpaper removal cost guide ($0.80–$3 per square foot for common stripping and steaming; dry stripping $0.80–$1.00, steaming $1–$3, soaking and scraping $3–$8 per square foot; 400 square feet $320–$1,200; small-job minimums around $75–$200; steamer rental $30–$40 per day; skim coat may be needed before sanding to a smooth finish) and Fixr's wallpaper removal cost data (removal labor $0.75–$2 per square foot, material handling and disposal $50–$75. Sources last checked: October 2026 — HomeGuide, Fixr, Angi. How we calculate these costs

Cost by scope

Wallpaper Removal cost ranges by scope — chart of the table below
ScopeTypical costWhat it includes
Dry stripping — easy, strippable paper on primed walls$0.80 – $1.50 per sq ftThe cheap end: HomeGuide prices dry stripping at $0.80–$1.00 per square foot and Angi prices stripping at $0.60–$1.50 — it only works where the wall was primed before papering
Steaming — the typical method$1 – $3 per sq ftThe shared band: both HomeGuide and Angi price steaming at $1–$3 per square foot — the chemical-free method that suits most walls except wood paneling
Soaking and scraping — difficult, multi-layer or unprimed walls$3 – $8 per sq ftThe expensive end: HomeGuide prices soaking and scraping at $3–$8 per square foot for very old paper on unprimed walls — Angi prices the same method lower, at $1–$2, so get the method in writing before work starts

Where the money goes

Part of the jobShareNote
Removal labor60–80% of totalAngi prices labor at $40–$80 per hour or $0.60–$3 per square foot, and Fixr prices removal labor at $0.75–$2 per square foot — the job is mostly time, and vinyl or multi-layer paper takes much longer
Wall repairs after removal10–25% of totalAngi prices post-removal wall repairs at $150–$1,000, and HomeGuide notes a skim coat may be needed before sanding to a smooth finish
Materials, disposal and equipment5–10% of totalFixr prices material handling and disposal at $50–$75, and HomeGuide prices steamer rental at $30–$40 per day for DIY
Minimum call-out on small jobs0–10% of totalHomeGuide notes small-job minimums around $75–$200 — a single accent wall still pays for the visit
Removal labor · 60–80%Wall repairs after removal · 10–25%Materials, disposal and equipment · 5–10%Minimum call-out on small jobs · 0–10%
Estimator’s note: on a wallpaper removal, removal labor is usually where quotes swing most (60–80% of total of a typical budget). Ask every contractor to itemize that line in writing — totals are only comparable when that part is.
A wall of old floral paper like this one is why method matters: HomeGuide prices dry stripping at $0.80–$1.00 per square foot but soaking and scraping at $3–$8, and Angi warns that nonporous vinyl and multi-layered paper take longer — the paper's age and layers set the method
A wall of old floral paper like this one is why method matters: HomeGuide prices dry stripping at $0.80–$1.00 per square foot but soaking and scraping at $3–$8, and Angi warns that nonporous vinyl and multi-layered paper take longer — the paper's age and layers set the method

What moves the price most

Paper type is the first driver: Angi warns that nonporous vinyl and multi-layered wallpaper take longer to remove than porous paper, raising labor time against the same wall area. Method is second: HomeGuide prices dry stripping at $0.80–$1.00, steaming at $1–$3 and soaking and scraping at $3–$8 per square foot — the method follows the paper, not the budget. Wall condition is third: Angi prices post-removal repairs at $150–$1,000, and unprimed walls tear, taking drywall paper with the old paste. Size, height and finish close the bill: HomeGuide prices 400 square feet of wall at $320–$1,200 for common methods, tall walls and stairwells add ladder time, and primer and paint after removal are a separate job.

Work out your quantities: before you compare quotes, run your measurements through our free remodeling calculators (paint, tile, concrete and flooring) — each one shows its formula and runs entirely in your browser.

Costs in your city

Labor is the biggest variable in any remodel, and labor is local — the same bathroom can price very differently in Houston than in Boston. We are adding city editions metro by metro, each with its own labor index, permit notes and climate factors, written for that city rather than copied from this page. Wave 1: Houston, Dallas–Fort Worth, Phoenix, Atlanta, Miami–South Florida, Orlando, Tampa, Charlotte, Austin and San Antonio. Until your city's page is live, use the national range here and weight it the way contractors do: Sun Belt labor often prices near or below the national middle, while coastal California and the Northeast metros often price well above it.

How this estimate was built: the range on this page is a synthesis of at least three published industry sources (national cost guides and the Remodeling Magazine Cost vs. Value data among them), cross-checked in October 2026. We publish planning ranges, never a single pretend-precise price. Full method: How We Estimate Costs.
Peeling blue floral paper in close view is the wall-condition question: Angi prices post-removal wall repairs at $150–$1,000, and HomeGuide notes a skim coat may be needed before sanding to a smooth finish — the paper comes off cheaply, the wall underneath sets the final bill
Peeling blue floral paper in close view is the wall-condition question: Angi prices post-removal wall repairs at $150–$1,000, and HomeGuide notes a skim coat may be needed before sanding to a smooth finish — the paper comes off cheaply, the wall underneath sets the final bill

Frequently asked questions

How much does wallpaper removal cost?

Typically $400–$1,200, with about $800 the most-pay figure. Angi puts the average at $793 with most homeowners paying $423–$1,192, and HomeGuide prices common stripping and steaming at $0.80–$3 per square foot.

What does wallpaper removal cost per square foot?

HomeGuide prices common stripping and steaming at $0.80–$3 per square foot, Angi prices removal at $0.60–$3, and Fixr prices removal labor alone at $0.75–$2. Difficult soaking-and-scraping work runs higher, at $3–$8 per square foot at HomeGuide.

Which wallpaper removal method is cheapest?

Dry stripping, at $0.80–$1.00 per square foot at HomeGuide ($0.60–$1.50 at Angi) — but it only works on strippable paper over a primed wall. Steaming at $1–$3 is the typical method, and soaking and scraping is the last resort for very old paper on unprimed walls.

Can I remove wallpaper myself?

HomeGuide prices steamer rental at $30–$40 per day, so a single easy room is a realistic DIY job. The risk is the wall underneath: soaking drywall too long or scraping too hard gouges the paper face, and Angi prices the resulting wall repairs at $150–$1,000 — more than the removal saved.

Does wallpaper removal include wall repair and painting?

No — removal is priced separately. Angi prices post-removal wall repairs at $150–$1,000, and HomeGuide notes a skim coat may be needed before sanding to a smooth finish. Primer and paint after removal are a separate painting job.

What makes wallpaper removal expensive?

Layers and resistance: Angi warns that nonporous vinyl and multi-layered paper take longer than porous paper, HomeGuide prices soaking and scraping at $3–$8 per square foot for very old paper on unprimed walls, and tall walls, stairwells and damaged walls underneath all add time and repair cost.

Before you sign: get at least 3 written local quotes for the same written scope, confirm permits and who pulls them, and keep a 10–20% contingency separate from the contract price.

Ahsan ul Haq — Editor, Remodel Cost Hub

Ahsan compiles and edits the cost guides on Remodel Cost Hub, cross-checking every range against at least three published sources before it is published — the full method is on our Methodology page. Spot an error on this page? Send a correction.

Wallpaper Removal cost range graphic
Save this range for later: Pin it on Pinterest

Related cost guides

Finished attic bedroom with a wood plank ceiling, brick gable wall, round window and skylights

Attic Conversion Cost

$25,000 – $50,000

Attic conversion typically costs $25,000 – $50,000 for a finished bedroom or office, with about $35,000 the most-pay figure — This Old House prices a simple bedroom conversion at $30,000–$50,000, Angi prices bedrooms at $9,000–$65,000 and offices at $10,000–$40,000, and HomeGuide prices finishing an attic into living space at $25,000–$75,000. The $35,000 most-pay figure sits in the bedroom overlap; a storage-only finish lands far below it and a primary suite with a bathroom lands far above it.

Woman sorting laundry beside a front-loading washer in a bright laundry area

Laundry Room Remodel Cost

$6,000 – $17,000

Laundry room remodel typically costs $6,000 – $17,000, with about $11,000 the most-pay figure — Angi puts the national average at $11,000 with most homeowners paying $6,000–$17,000, and Block Renovation puts typical projects at $6,000–$10,000 inside that band. The $11,000 most-pay figure is Angi's average; a cosmetic refresh lands far below it and a relocation or luxury finish lands far above it.

Home office corner desk with a monitor, printer, desk lamp and wall shelves with wicker baskets

Home Office Remodel Cost

$5,000 – $20,000

Home office remodel typically costs $5,000 – $20,000 for converting an existing room of about 100 square feet, with about $15,000 the most-pay figure — Angi puts the national average at $15,000 with most homeowners spending $2,000–$22,000, and prices a 10-by-10-foot conversion at $5,000–$20,000. The $15,000 most-pay figure is Angi's average across conversions and additions; a spare-room refresh lands far below it and a custom build-out or addition lands far above it.

A bright remodeled bedroom with a white bed, blue and patterned pillows, a wood bench at the foot of the bed, a patterned rug and a ceiling fan with a light

Bedroom Remodel Cost

$12,000 – $28,000

Remodeling an existing bedroom — new flooring, paint, lighting and furnishings, with minor layout changes, at $100–$200 per square foot

A living room with a red sofa and a glass coffee table in front of floor-to-ceiling glass walls overlooking the water

Living Room Remodel Cost

$2,500 – $15,000

Remodeling the main living room — new flooring, paint, lighting and built-ins, with the layout kept or opened up, at $50–$200 per square foot

A dining set with a black table and six tufted chairs under a crystal chandelier, with white cabinets and tree-patterned wallpaper

Dining Room Remodel Cost

$7,000 – $25,000

Remodeling the dining room — new flooring, paint, lighting and trim, with the option to open the floor plan, at $80–$200 per square foot