Home › Cost Guides › Drain Cleaning
Cost Guide

How Much Does Drain Cleaning Cost? (2026)

By Ahsan ul Haq · Last updated: 11 November 2026 · Planning estimate — not a quote · How we estimate

Typical range
$150 – $350
Most homeowners pay around $250 · The typical project is a professional snaking of one clogged household drain — a kitchen sink, bathroom sink, tub or toilet — with the auger run to the clog, the line flushed and flow tested before the plumber leaves. Main-line stoppages and hydro jetting are tiered separately below; a full repipe or a sewer replacement is different work, priced on the plumbing-repipe page and in the FAQs, never folded into a cleaning.
typical
$150$350
Low end = minor scope  ·  marker = typical middle  ·  high end = major scope. Add 10–20% contingency to any budget.
Chrome kitchen faucet dripping slowly into a stainless steel sink

Drain Cleaning cost at a glance

  • Typical range: $150 – $350
  • Most homeowners pay: around $250
  • Prices vary most by: Snaking labor — auger work at the clog (50–65% of the budget)

Cross-checked against three published sources for this project. Sources used for this page: the Angi drain cleaning cost guide, HomeGuide's drain cleaning cost guide and Thumbtack's drain cleaning cost data. Sources last checked: October 2026 — HomeGuide, Angi, Thumbtack. How we calculate these costs

Cost by scope

Drain Cleaning cost ranges by scope — chart of the table below
ScopeTypical costWhat it includes
One simple fixture clog, close to the drain opening$100 – $275The floor of the market in both datasets: HomeGuide prices a simple sink, tub or toilet clog at $100–$275 and Thumbtack prices a kitchen sink at $100–$225 and a toilet at $110–$275. A hair or food clog the hand or power auger reaches quickly is this tier.
One drain snaked by a plumber — the typical job$150 – $350The typical project on this page. Angi puts professional drain cleaning at $147–$352 with an average of about $246; Thumbtack averages $195 for snaking and HomeGuide matches the single-drain band. Where the clog sits and how compacted it is decides the landing point.
Main sewer line cleaning or hydro jetting$200 – $800HomeGuide prices main sewer cleaning at $200–$500 on average and main-line work overall at $175–$800, while Thumbtack prices hydro jetting at $350–$600. Multiple fixtures backing up at once is the classic main-line signature — jetting severe grease or root cases runs higher again, to $600–$1,400 in HomeGuide.

Where the money goes

Part of the jobShareNote
Snaking labor — auger work at the clog50–65%The plumber and the machine time: HomeGuide puts plumbers at $45–$150 an hour, and a standard cleaning visit runs 1 to 3 hours depending on clog location and severity
Call-out & minimum-visit fee15–25%The dispatch and minimum charge inside every visit — HomeGuide puts the normal-hours call-out at $50–$200, which is why a five-minute clog still bills like a visit
Camera inspection & diagnosis5–20%Only when the clog recurs or sits in the main line: HomeGuide prices a sewer camera inspection at $125–$500, often discounted or waived when the same company cleans the line
Trap reset, flushing & cleanup5–12%Pulling and resetting a toilet or trap where access requires it, flushing the cleared line and proving flow at every connected fixture before the invoice is written
Snaking labor — auger work at the clog · 50–65%Call-out & minimum-visit fee · 15–25%Camera inspection & diagnosis · 5–20%Trap reset, flushing & cleanup · 5–12%
Estimator’s note: on drain cleaning, snaking labor — auger work at the clog is usually where quotes swing most (50–65% of a typical budget). Ask every contractor to itemize that line in writing — totals are only comparable when that part is.
Behind every fixture sits pipework like this — where the clog sits in the run decides the price, from $100–$275 at a fixture to $175–$800 in the main line in HomeGuide.
Behind every fixture sits pipework like this — where the clog sits in the run decides the price, from $100–$275 at a fixture to $175–$800 in the main line in HomeGuide.

What moves the price most

Location is the first price. HomeGuide prices a toilet at $100–$275, a kitchen sink at $100–$220 and a laundry drain at $150–$250, against $175–$800 for the main line — the same clog costs differently by the pipe it sits in. Method is the second: Thumbtack averages $195 for snaking against $350–$600 for hydro jetting, because the snake punches through a clog while the jet scours the pipe wall clean. Access decides the labor: an exposed cleanout is minutes of work; a clog reached by pulling a toilet or opening a trap adds the reset to the bill. Timing multiplies: HomeGuide notes after-hours emergency rates at 2 to 3 times standard pricing, so a Sunday-night backup is a different invoice from the same clog on Tuesday. Recurrence is the warning sign — a line that clogs twice in a year is asking for the $125–$500 camera inspection in HomeGuide, not a third snaking.

Work out your quantities: before you compare quotes, run your measurements through our free remodeling calculators (paint, tile, concrete and flooring) — each one shows its formula and runs entirely in your browser.

Worked example: how a typical drain cleaning budget breaks down

Take the typical job — one kitchen sink draining slowly, power-snaked to the clog, the line flushed and every tap in the house flow-tested. Here is a realistic $250 version of that invoice, beside Angi's $246 average: The budget below totals $250 — the "most homeowners pay around" figure from the top of this page — split using this page's own cost breakdown. It shows how a real quote at that level is usually composed; every line is built from the ranges on this page, and it is an illustration, not a quote for your project.

Line itemExample budget
Snaking labor — power auger to the clog & back$160
Call-out & minimum-visit fee$55
Trap reset, line flush & flow test$35
Total$250

What most people get wrong

  • Paying a main-line price for a fixture clog. The location sets the tier in every dataset here — $100–$275 at one fixture against $175–$800 in the main line — so a quote should name which drain is blocked before it names a number.
  • Buying hydro jetting for a first-time hair clog. Jetting at $350–$600 in Thumbtack is the recurring-clog tool; a standard snake at about $195 clears the simple blockage it is priced for.
  • Re-snaking a line that keeps clogging. The second identical clog in a year is the camera's job — $125–$500 in HomeGuide — because roots and broken pipe do not care how many times the snake visits.
  • Pouring chemical cleaner in before the plumber comes. HomeGuide warns the chemicals can damage the pipe, and they leave a caustic puddle standing in exactly the trap the plumber has to open.

Costs in your city

Drain cleaning is a labor-and-dispatch price, so it tracks your local plumber market more than any material. HomeGuide's $45–$150 hourly band runs widest in the big metros, and the $50–$200 call-out inside every visit is where dense-city quotes grow. Housing age is the quieter local variable: older neighbourhoods with cast iron and clay lines clog with roots and scale and live nearer the main-line tiers, while newer suburbs on PVC mostly buy the $150–$350 fixture visit. Emergency timing is local too — after-hours rates at 2 to 3 times standard in HomeGuide bite hardest where few companies run a night rota. Ask each plumber the same two questions — is the price for the fixture or the main line, and is a camera included — and quotes become comparable in any city.

How we got these numbers

Cross-checked against the Angi drain cleaning cost guide (professional cleaning $147–$352, average about $246; main line $100–$800), HomeGuide's drain cleaning cost guide — opened and read in full this run (one drain $100–$275; main sewer cleaning $200–$500; camera inspection $125–$500; plumbers $45–$150 an hour) and Thumbtack's drain cleaning cost data (snaking average $195; hydro jetting $350–$600; kitchen sink $100–$225). Where the three disagree, this page publishes the overlap and says so.

Flow at the tap is the test after the work: a cleared line is flushed and proven at every connected fixture before the visit is billed as done.
Flow at the tap is the test after the work: a cleared line is flushed and proven at every connected fixture before the visit is billed as done.

Frequently asked questions

How much does drain cleaning cost on average?

Angi averages about $246 inside $147–$352, HomeGuide prices one drain at $100–$275, and Thumbtack averages $195 for snaking. Budget about $250 for one household drain professionally snaked and flow-tested.

How much does it cost to snake a main sewer line?

More than a fixture drain: HomeGuide prices main sewer cleaning at $200–$500 on average, with main-line work overall at $175–$800, and Angi puts a main line clog at $100–$800 by severity. Hydro jetting a severe main line runs $350–$600 in Thumbtack and higher in HomeGuide.

Is hydro jetting worth it over snaking?

For a one-off hair or food clog, no — snaking at about $195 in Thumbtack clears it. For recurring clogs, grease buildup or roots, jetting at $350–$600 cleans the full pipe wall instead of boring a hole through the blockage, which is why it lasts longer between visits.

How much does a sewer camera inspection cost?

HomeGuide prices it at $125–$500. It is worth it when clogs keep returning, before hydro jetting older pipes, or when a cleaning quote turns into a repair quote — the camera is what separates a blockage from a broken pipe.

Can I clean a drain myself?

For a single slow sink, partly: HomeGuide prices a plunger at $4–$20 and a snake rental at $30–$80 a day. Chemical cleaners are the false economy — HomeGuide warns they can damage the pipe itself — and a main-line stoppage, with several fixtures backing up, is professional work.

Before you sign: Location, method, access — a fair drain quote names all three, and the $250 middle of the market is one drain, snaked clear and proven flowing.

Ahsan ul Haq — Editor, Remodel Cost Hub

Ahsan compiles and edits the cost guides on Remodel Cost Hub, cross-checking every range against at least three published sources before it is published — the full method is on our Methodology page. Spot an error on this page? Send a correction.

Drain Cleaning cost range graphic
Save this range for later: Pin it on Pinterest

Related cost guides

Worker in hi-vis pressure washing stone steps, spray visible

Hydro Jetting Cost

$350 – $600

A standard professional hydro jetting visit for a clogged sewer line — high-pressure water scouring the pipe wall clean, not just punching a hole through the clog

Pest control worker in a red uniform and helmet fogging a yard beside a fence

Pest Control Cost

$150 – $300

The typical project on this page is one professional general pest control visit — inspection and pest identification, interior baseboard and exterior perimeter treatment, entry points spot-treated, and a written report with a re-service window. Recurring plans are tiered separately below; bed bug heat treatments and termite work are different products with their own price class, named in the tiers and FAQs rather than folded into a general visit.

Pest control worker in red protective gear fogging outside a house

Termite Treatment Cost

$250 – $1,000

Termite treatment typically costs $250 – $1,000 for a standard treatment, with about $621 the figure most jobs land near — Angi's 2026 national average is $621 inside its $263–$1,033 most-pay band, and HomeGuide prices chemical or bait treatments at $225–$2,500 per treatment. This guide prices treatment of an existing infestation — inspection, application and follow-up — not damage repair, which Angi prices separately at $250–$6,000.

Pest-control technician crouching outdoors with his kit beside a house

Termite Inspection Cost

$75 – $250

Standard visual inspection of accessible interior, exterior, attic and crawl space, with a written report

Pest-control technician in red helmet and respirator fogging a dining room with a blue fogger

Bed Bug Treatment Cost

$1,000 – $4,000

Professional bed bug treatment for a standard home typically costs $1,000 – $4,000, with about $2,500 the figure most whole-home jobs land near — Angi's 2026 data puts the national average at $2,500 with most homeowners paying $1,000–$4,000, HomeAdvisor averages $2,500 inside the same $1,000–$4,000 band, and HomeGuide prices a single room at $300–$500 against $2,500–$5,000 or more for a whole home. This guide prices professional treatment — inspection, treatment and follow-up — not DIY sprays, and not mattress or furniture replacement.

White brick wall with dark mold staining spreading along the mortar lines

Mold Remediation Cost

$1,500 – $3,750

The typical project is a contained, room-scale remediation: the work area sealed off with containment, the affected drywall and material cut out, the space HEPA-vacuumed and dried, and testing on either side of the job. Small bathroom spots and whole-house jobs are tiered separately below; this band is the standard professional remediation most homeowners actually buy.