Barn Door Installation cost at a glance
- Typical range: $400 – $1,500
- Most homeowners pay: around $1,000
- Prices vary most by: Door slab (40–55% of the budget)
Cross-checked against two published sources for this project. Sources used for this page: Angi's barn door installation cost guide (updated October 30, 2026: professional installation $1,350–$5,000 per door; interior doors $200–$2,500 averaging $1,500, exterior $1,000–$5,000 averaging $2,700; installer labor $300–$2,000, 30–50% of the project; standard hardware sets $50–$500, custom hardware up to $1,500 extra; single-door install $200–$1,600, double $500–$3,400) and Angi's pocket-versus-barn-door guide (barn door materials and hardware $250–$2,500, installation $100–$300 per existing wall; pocket door installation $1,000–$2,500 for an existing wall), HomeGuide's barn door installation cost guide (single $400–$1,400, double $800–$2,800; labor $100–$1,000; door alone $200–$2,000 or more by size) and EngineerFix's barn door installation cost guides (MDF and engineered wood $100–$800, solid hardwood from $700 past $3,000 custom; basic hardware kits $50–$150, mid-range $150–$300; professional labor $200–$500 standard, simple flat fee $100–$300; mid-range total $700–$1,700, DIY budget total $250–$450). Sources last checked: October 2026 — HomeGuide, Angi. How we calculate these costs
Cost by scope

| Scope | Typical cost | What it includes |
|---|---|---|
| Budget single door, MDF or composite — the budget route | $250 – $700 | The cheap end: EngineerFix prices MDF and engineered-wood doors at $100–$800 and a DIY budget total at $250–$450 — a light single door on a basic track kit, which is why it prices below a solid-wood install |
| Standard single wood door — the typical job | $400 – $1,500 | The shared band itself: HomeGuide prices a single installed door at $400–$1,400, and EngineerFix prices a mid-range total at $700–$1,700 — a solid pine or wood door, a quality track kit and professional hanging, which is the common job and the band this page is built on |
| Double doors, custom hardwood or exterior — the top end | $1,500 – $5,000 | The expensive end: HomeGuide prices doubles at $800–$2,800, Angi prices exterior doors at $1,000–$5,000 averaging $2,700, and EngineerFix prices custom hardwood past $3,000 — two panels, a longer track, heavier hardware and custom sizing are what push a job past the standard band |
Where the money goes
| Part of the job | Share | Note |
|---|---|---|
| Door slab | 40–55% of total | The door itself: EngineerFix prices MDF at $100–$800, solid pine in the mid-range and hardwood from $700 past $3,000 custom — material and size are the biggest single choice, and a glass or oversized panel sits at the top of this line |
| Track and hardware | 15–25% of total | What it slides on: Angi prices standard hardware sets at $50–$500 with custom hardware adding up to $1,500, and EngineerFix prices basic kits at $50–$150 and mid-range systems at $150–$300 — rollers, rail, stops and a floor guide, with soft-close and bypass tracks as the upgrades |
| Installation labor | 20–35% of total | The hanging: HomeGuide prices labor at $100–$1,000 and Angi at $300–$2,000, 30–50% of the project — leveling the rail, finding studs or fitting a backer board, and setting the guides so the door slides and stays put |
| Trim, floor guide and old door removal | 5–10% of total | The finishing: trim or a header board to dress the rail, a floor guide to stop swing, and removing the old door and casing — small lines, but a wall with no studs where the rail lands can push this line up |

What moves the price most
Single versus double is the first driver: HomeGuide prices a double at $800–$2,800 against $400–$1,400 for a single, because a double needs two panels, twice the hardware and a longer rail plus the wall space for both panels to slide. Door material is second: EngineerFix prices MDF at $100–$800 against hardwood from $700 past $3,000 custom, and a heavier door also needs heavier hardware to hang safely. Hardware grade is third: Angi prices standard sets at $50–$500, with soft-close, bypass and custom finishes on top, and a bypass track for a wide opening costs more than a single straight rail. Finally, the wall itself decides the labor: the rail must land on studs or a fitted backer board, and a wall with no studs in the right places, or an opening that needs widening, is what turns a one-to-three-hour hang into a bigger job.
Costs in your city
Labor is the biggest variable in any remodel, and labor is local — the same bathroom can price very differently in Houston than in Boston. We are adding city editions metro by metro, each with its own labor index, permit notes and climate factors, written for that city rather than copied from this page. Wave 1: Houston, Dallas–Fort Worth, Phoenix, Atlanta, Miami–South Florida, Orlando, Tampa, Charlotte, Austin and San Antonio. Until your city's page is live, use the national range here and weight it the way contractors do: Sun Belt labor often prices near or below the national middle, while coastal California and the Northeast metros often price well above it.

Frequently asked questions
How much does it cost to install a barn door?
Most standard single interior doors land in the $400–$1,500 band on this page, with a common middle around $1,000. A budget MDF door can come in below that band, and double doors, custom hardwood or exterior doors usually land above it.
How much more do double barn doors cost?
Roughly double the single-door job: HomeGuide prices doubles at $800–$2,800 against $400–$1,400 for a single, because a double needs two panels, two sets of hangers and a longer rail — plus enough clear wall on both sides for the panels to slide open.
Does my wall need reinforcement for a barn door?
The rail must be fixed into studs or a backer board screwed into studs — drywall alone will not hold a sliding door, especially a solid-wood one. A backer board is the standard fix where the studs do not line up with the rail, and it is part of the labor line on this page, not an extra surprise.
Can a barn door lock, and does it block sound?
Only partly: a barn door slides over the opening rather than sealing into a frame, so it never closes as tightly as a swinging door, and privacy latches are available but not deadbolts. For a bathroom or bedroom where privacy matters, that gap at the edges is the trade-off to accept before buying.
Can I install a barn door myself?
A standard single door on a wall with well-placed studs, usually yes — EngineerFix puts a straightforward hang at one to three hours, and a simple professional flat fee at $100–$300. Heavy solid-wood doors, doubles, bypass tracks and walls that need a backer board are the cases where a professional hang earns its fee.
Barn door or pocket door — which costs less?
A barn door, by a clear margin: Angi prices barn door materials and hardware at $250–$2,500 with installation at $100–$300 per existing wall, against $1,000–$2,500 to fit a pocket door into an existing wall, because a pocket door needs the wall opened up and rebuilt around the pocket.






