Home › Cost Guides › Putting Green Installation
Cost Guide

How Much Does a Putting Green Installation Cost? (2026)

By Ahsan ul Haq · Last updated: 11 November 2026 · Planning estimate — not a quote · How we estimate

Typical range
$3,500 – $9,000
Most homeowners pay around $4,300 · A professionally installed backyard putting green — Angi's 2026 national average is $4,300, with most homeowners paying $3,500–$9,000. Installed cost runs $15–$40 per sq ft depending on size and turf quality; this page prices a standard pro-installed green, with DIY kits and large custom greens priced separately below.
typical
$3,500$9,000
Low end = minor scope  ·  marker = typical middle  ·  high end = major scope. Add 10–20% contingency to any budget.
Golfers putting on a scenic course green

Putting Green Installation cost at a glance

  • Typical range: $3,500 – $9,000
  • Most homeowners pay: around $4,300
  • Per square foot: $15–$40 per sq ft

Cross-checked against three published sources for this project. Sources used for this page: Angi, 'How Much Does a Backyard Putting Green Cost in 2026?', updated Oct 15, 2026 — typical $3,500–$9,000; national average $4,300; installed $15–$40 per sq ft; size tiers (small under 400 sq ft $25–$40, medium 400–2,000 $20–$30, large 2,000+ $15–$25 per sq ft); 250 sq ft worked example $2,050–$7,450 (materials $1,250–$5,000; labour $750–$2,250; excavation $50–$200). Note: Angi's text twice writes the $4,300 average and the $75,000 top end as 'per square foot' — a unit error; both are totals and are printed as totals here. Turf Factory Direct, 'A Worthwhile Investment: Understanding Putting Green Turf Cost', re-posted Jan 26, 2026 — turf material $2–$8 per sq ft (nylon $5–$8, polyethylene $3–$6, polypropylene $2–$4); DIY build $5–$15 per sq ft; kits from $400 per 100 sq ft; lifespan 15–20 years; maintenance $100–$350 per year. USGA, 'How To Make Your Backyard Putting Green Dream a Reality', Green Section Record Vol. 62 Issue 17 — natural bentgrass $18–$20 per sq ft materials only, irrigation excluded (single source). HomeAdvisor corroboration only — same Angi Inc. data family, not an independent source. Disagreements published, not averaged: lifespan (Turf Factory Direct 15–20 years vs HomeAdvisor 5–15 years); maintenance (Turf Factory Direct $100–$350 per year vs HomeGuide $250–$550 per year; HomeGuide's figure is cited second-hand — its putting-green page could not be opened this run). No source publishes a permit dollar figure. Breakdown shares are derived from the worked example below. Checked November 2026.. Sources last checked: October 2026 — HomeAdvisor, HomeGuide, Angi. How we calculate these costs

Cost by scope

Putting Green Installation cost ranges by scope — chart of the table below
ScopeTypical costWhat it includes
DIY kit / small green$400 – $3,000A DIY kit or a small green installed yourself — kits start at $400 per 100 sq ft and a full DIY build runs $5–$15 per sq ft (Turf Factory Direct). A small pro-installed green under 400 sq ft runs $25–$40 per sq ft (Angi).
Standard pro-installed green (200–500 sq ft)$3,500 – $9,000The typical pro-installed green — Angi's most-pay band, at $15–$40 per sq ft. A 250 sq ft green works out to $2,050–$7,450 in Angi's own calculator, and the $4,300 most-pay example below sits inside it.
Large / custom green$9,000 – $50,000+A large green over 2,000 sq ft at $15–$25 per sq ft ($30,000–$50,000), or a custom build with landscaping, lighting and a water feature — Angi's top end reaches $75,000 with premium landscaping and accessories.

Where the money goes

Part of the jobShareNote
Turf and materials44% of total$1,900 for turf and materials — a 250 sq ft green at $2–$8 per sq ft for turf alone (Turf Factory Direct), inside Angi's $1,250–$5,000 materials band for the same size. Share derived from the worked example below.
Base prep and drainage19% of total$800 for base preparation and drainage — inside Turf Factory Direct's excavation ($1–$3 per sq ft) plus aggregate base ($1–$2 per sq ft) bands, which work out to $500–$1,250 for 250 sq ft. Share derived from the worked example below.
Installation labour30% of total$1,300 for installation labour — inside Angi's $750–$2,250 labour band for a 250 sq ft green. Share derived from the worked example below.
Cups, flags, edging and infill7% of total$300 for cups, flags, edging and infill — inside Turf Factory Direct's $275–$650 DIY accessories band. Share derived from the worked example below.
Turf and materials · 44%Base prep and drainage · 19%Installation labour · 30%Cups, flags, edging and infill · 7%
Estimator’s note: on a putting green installation, turf and materials is usually where quotes swing most (44% of total of a typical budget). Ask every contractor to itemize that line in writing — totals are only comparable when that part is.
An indoor practice mat on artificial turf: DIY kits start at $400 per 100 sq ft, and a full DIY build runs $5–$15 per sq ft (Turf Factory Direct).
An indoor practice mat on artificial turf: DIY kits start at $400 per 100 sq ft, and a full DIY build runs $5–$15 per sq ft (Turf Factory Direct).

What moves the price most

Worked example — $4,300 most-pay green (250 sq ft, pro-installed): turf and materials $1,900 (44%) + base prep and drainage $800 (19%) + installation labour $1,300 (30%) + cups, flags, edging and infill $300 (7%) = $4,300. Every line sits inside its published band. Size sets the per-sq-ft rate: small greens under 400 sq ft run $25–$40 per sq ft, medium greens of 400–2,000 sq ft run $20–$30, and large greens over 2,000 sq ft run $15–$25 (Angi). Where sources disagree: lifespan — Turf Factory Direct says quality turf lasts 15–20 years, HomeAdvisor says 5–15 years; and maintenance — Turf Factory Direct prices it at $100–$350 per year against HomeGuide's $250–$550 per year (HomeGuide's figure is cited second-hand; its putting-green page could not be opened this run). Unit error in the source: Angi's text twice writes the $4,300 average and the $75,000 top end as "per square foot" — both are totals and are printed as totals here. Permits: no published source gives a permit price for a putting green, so none is published — check with your local building department before breaking ground. Timeline: 1–2 days for a professional install (Angi; HomeGuide cites 1–5 days). Related costs: artificial turf installation, landscape lighting installation, sprinkler system installation and patio installation.

Work out your quantities: before you compare quotes, run your measurements through our free remodeling calculators (paint, tile, concrete and flooring) — each one shows its formula and runs entirely in your browser.

Costs in your city

Labor is the biggest variable in any remodel, and labor is local — the same bathroom can price very differently in Houston than in Boston. We are adding city editions metro by metro, each with its own labor index, permit notes and climate factors, written for that city rather than copied from this page. Wave 1: Houston, Dallas–Fort Worth, Phoenix, Atlanta, Miami–South Florida, Orlando, Tampa, Charlotte, Austin and San Antonio. Until your city's page is live, use the national range here and weight it the way contractors do: Sun Belt labor often prices near or below the national middle, while coastal California and the Northeast metros often price well above it.

How this estimate was built: the range on this page is a synthesis of at least three published industry sources (national cost guides and the Remodeling Magazine Cost vs. Value data among them), cross-checked in October 2026. We publish planning ranges, never a single pretend-precise price. Full method: How We Estimate Costs.
A ball on artificial turf: the worked example prices turf and materials at $1,900 (44%) of a $4,300 green, inside Angi's $1,250–$5,000 materials band for 250 sq ft.
A ball on artificial turf: the worked example prices turf and materials at $1,900 (44%) of a $4,300 green, inside Angi's $1,250–$5,000 materials band for 250 sq ft.

Frequently asked questions

How much does a backyard putting green cost?

Most homeowners pay $3,500–$9,000, with Angi's 2026 national average at $4,300. Installed cost runs $15–$40 per sq ft; a DIY kit starts at $400 per 100 sq ft, while a large custom green runs $9,000–$50,000+.

How much does a putting green cost per square foot?

Professionally installed, $15–$40 per sq ft (Angi). By size: small greens under 400 sq ft run $25–$40, medium greens of 400–2,000 sq ft run $20–$30, and large greens over 2,000 sq ft run $15–$25. Turf material alone costs $2–$8 per sq ft (Turf Factory Direct).

Can I install a putting green myself?

Yes — a full DIY build runs $5–$15 per sq ft and kits start at $400 per 100 sq ft (Turf Factory Direct). A professional install takes 1–2 days (Angi).

How long does artificial putting green turf last?

The sources disagree: Turf Factory Direct says quality turf lasts 15–20 years, while HomeAdvisor says 5–15 years. Buy the better turf and expect the longer end only with proper care.

How much does it cost to maintain a putting green?

Turf Factory Direct prices maintenance at $100–$350 per year; HomeGuide puts it at $250–$550 per year. The two bands disagree, so budget the higher one.

Do I need a permit for a backyard putting green?

No published source gives a permit price for a putting green, so this page publishes none. Most residential greens are a landscaping job, but check with your local building department before breaking ground.

Before you sign: get at least 3 written local quotes for the same written scope, confirm permits and who pulls them, and keep a 10–20% contingency separate from the contract price.

Ahsan ul Haq — Editor, Remodel Cost Hub

Ahsan compiles and edits the cost guides on Remodel Cost Hub, cross-checking every range against at least three published sources before it is published — the full method is on our Methodology page. Spot an error on this page? Send a correction.

Putting Green Installation cost range graphic
Save this range for later: Pin it on Pinterest

Related cost guides

Classic tiered stone fountain in a garden with flowers

Fountain Installation Cost

$925 – $4,784

A garden fountain, professionally installed — Angi's 2026 national average across 601 verified projects is $2,730, with most homeowners paying $925–$4,784. This page prices a standard prefab garden fountain; custom, pondless and pool-waterfall features cost more and are priced separately below.

Backyard with potted palms and a horizontal-slat privacy fence

Composite Fence Installation Cost

$3,300 – $14,250

150 linear feet of 6-foot privacy fence — the three published sources disagree sharply on installed cost per linear foot (Angi $11–$45, Fixr $43–$55, HomeGuide $50–$100+), so this page publishes the honest spread across all three: $3,300–$14,250 for 150 feet. The $7,350 most-pay figure is the midpoint of Fixr's $43–$55 per linear foot band times 150 feet — the middle of the three sources, not a published national average. Composite boards are recycled wood fiber and plastic, and they never need painting, staining or sealing.

Cobble and paver driveway in front of a house

Paver Driveway Installation Cost

$6,000 – $18,000

A paver driveway, professionally installed — Angi's 2026 national average is $12,000, with most homeowners paying $6,000–$18,000. Installed cost runs $10–$30 per sq ft (Angi and HomeGuide agree exactly); this page prices a standard 600 sq ft two-car driveway in concrete pavers, with premium stone, cobblestone and custom patterns priced separately below. Angi's text writes the $12,000 average as 'per square foot' — a typo; it is a $12,000 total.

Colourful modular apartment buildings in Almere

Modular Home Construction Cost

$160,000 – $320,000

A modular home, factory-built and finished on site — Angi's 2026 national average is $240,000, with most homeowners paying $160,000–$320,000. That is the price for a 2,000 sq ft standard home at about $120 per sq ft ($80–$160 per sq ft installed), on land you already own — land is $10,000–$200,000+ extra and is never included in these figures. Modular homes are built to the same local and state building codes as site-built homes and set on a permanent foundation; they are not manufactured (mobile) homes, which follow federal HUD code on a steel chassis.

Dark-grey corrugated shipping container house on a hillside with a roof deck

Shipping Container Home Construction Cost

$25,000 – $250,000

A shipping container home, factory-cut and finished on site — Angi's 2026 national average is $80,000, with most homeowners paying $25,000–$250,000. That is the price for the finished home at $150–$350 per sq ft, on land you already own — land is $5,000–$18,000 per acre extra (HomeGuide) and is never included in these figures. The container itself is only a small share of the finished cost; site work, foundation, cutting and welding, insulation and finishes dominate. Angi's text writes the $25,000–$250,000 band as 'per square foot' — a typo; it is a total.

Single-storey stone bungalow with a red tile roof and glass front, set in a large lawn

Guest House Construction Cost

$62,000 – $225,000

A detached guest house, stick-built in your backyard — Angi's 2026 national average is $85,000, with most homeowners paying $62,000–$225,000. That is the price for a guest house at $110–$250 per sq ft, on land you already own — no source includes land purchase, and site prep, utility runs and permits are priced separately below. A simple sleeping unit with a kitchenette sits in this band; a full independent dwelling with a full kitchen and full bath is a detached ADU, priced higher at $110,000–$285,000 (Angi).