Modular Home Construction cost at a glance
- Typical range: $160,000 – $320,000
- Most homeowners pay: around $240,000
- Per square foot: $120 per sq ft
Cross-checked against two published sources for this project. Sources used for this page: Angi, 'How Much Does a Modular Home Cost? [2026 Data]', updated Oct 29, 2026 — national average $240,000; most homeowners pay $160,000–$320,000; $80–$160 per sq ft installed; by size (1,500 sq ft $120,000–$240,000; 2,000 sq ft $160,000–$320,000); land $10,000–$200,000+ extra, excluded from the average; customizations add 20–100%, up to $900,000; delivery $5–$10 per sq ft, $3,000–$20,000; foundation by type (basement $20–$37, crawl space $6–$18, pier and beam $6–$12, slab $5–$16 per sq ft); permits $500–$4,000, averaging $1,000; timeline 4–6 months, up to ~8 with delays; stick-built average $323,000 vs modular $240,000. HomeGuide, 'How Much Does It Cost to Build a Modular Home? (2026)', updated Dec 1, 2025 — 1,500 sq ft base unit $75,000–$150,000 ($50–$100 per sq ft), turn-key total $120,000–$240,000; standard total $80–$160 per sq ft; estimator table (unit, land prep $4,000–$11,000, foundation $6,000–$20,000, delivery $3,000–$12,000, taxes $5,000–$15,000, installation $10,000–$50,000, utilities $2,500–$25,000+, permits $500–$4,000); crawl space $6,300–$16,300; states a modular home CANNOT be placed on a monolithic slab; custom $200,000–$500,000 all-in; timeline 2–6 months; modular 10–20% cheaper than stick-built. NOTE: Angi and HomeGuide sit in the same Angi Inc. data family — they are NOT two independent confirmations of the $240,000 average; only Angi publishes that average. Rocket Mortgage, 'Modular home prices: What to expect when buying', updated Mar 15, 2026 — permits $500–$5,000; foundation $7–$30 per sq ft; utility connections up to $6,700 itemized (gas $550, sewer $3,200, water $1,600, electric $1,350); customizations +$10–$150 per sq ft; delivery and assembly $5–$35 per sq ft; sales tax $5,000–$10,000; land not included. Realtor.com, 'Modular vs. Manufactured Homes: Which Is Cheaper and Easier To Find?', Oct 26, 2026 — modular homes 'usually around $110 per square foot' vs manufactured around $85; corroboration of the $/sq ft band only. Disagreements published, not averaged: Angi's non-cost-guide article says a $270,000 average — not used; slab (Angi lists it, HomeGuide says no monolithic slab); GC share (Angi 20–40% — not used, its own task list sums far below); custom top end $600,000+ vs Angi's $900,000 extreme. Land is excluded from every headline figure on this page. Breakdown shares are derived from the worked example below. Checked November 2026.. Sources last checked: October 2026 — HomeGuide, Angi. How we calculate these costs
Cost by scope

| Scope | Typical cost | What it includes |
|---|---|---|
| Budget — 1,200–1,500 sq ft basic single-story | $120,000 | A basic single-story home on a standard floor plan, pier-and-beam or crawl-space foundation, standard finishes and minimal site work — no garage or deck. About $80–$100 per sq ft, grounded in HomeGuide's 1,500 sq ft turn-key low end of $120,000. |
| Standard — 2,000 sq ft 3-bed/2-bath | $240,000 | The most-pay tier — the worked example below: a 2,000 sq ft 3-bed/2-bath home on a crawl-space foundation, standard finishes, full button-up finishing, utility hookups, permits and sales tax. About $120 per sq ft. |
| Premium — 2,000–2,500 sq ft custom design | $450,000 | A custom design with a basement foundation, upgraded finishes (quartz, hardwood, custom cabinetry), plus a garage and deck. About $180–$225 per sq ft, inside HomeGuide's custom $130–$310 per sq ft band. Custom builds can reach $600,000+; Angi's $900,000 figure is an extreme, not a typical premium. |
Where the money goes
| Part of the job | Share | Note |
|---|---|---|
| Factory modules | 52% of total | $125,000 for the factory modules (base unit) — 2,000 sq ft at $62.50 per sq ft, inside HomeGuide's $50–$100 per sq ft base band ($100,000–$200,000 for 2,000 sq ft). Share derived from the worked example below. |
| Installation and button-up finishing | 20% of total | $48,000 for installation and button-up finishing — inside HomeGuide's $10,000–$50,000 installation band and Rocket Mortgage's $5–$35 per sq ft delivery-plus-assembly band ($10,000–$70,000 for 2,000 sq ft). Share derived from the worked example below. |
| Utility hookups | 9% of total | $21,000 for utility hookups (water, sewer, electric, gas) — inside HomeGuide's $2,500–$25,000+ utilities band. Share derived from the worked example below. |
| Foundation — crawl space | 6% of total | $14,000 for a crawl-space foundation — inside HomeGuide's $6,300–$16,300 crawl-space band and Angi's $6–$18 per sq ft crawl-space band. Share derived from the worked example below. |
| Delivery and crane set | 5% of total | $12,000 for delivery and crane set — inside HomeGuide's $3,000–$12,000 and Angi's $3,000–$20,000 delivery bands (Angi: $5–$10 per sq ft). Share derived from the worked example below. |
| Sales tax | 4% of total | $10,000 for sales tax — inside HomeGuide's $5,000–$15,000 and Rocket Mortgage's $5,000–$10,000 sales-tax bands. Share derived from the worked example below. |
| Site prep — clearing and grading | 3% of total | $7,500 for site prep (clearing and grading) — inside HomeGuide's $4,000–$11,000 land-prep band and Angi's clearing $1,400–$6,200 plus grading $1,000–$3,300 combined band. Share derived from the worked example below. |
| Permits and fees | 1% of total | $2,500 for permits and fees — inside Angi's $500–$4,000, HomeGuide's $500–$4,000 and Rocket Mortgage's $500–$5,000 permit bands. Share derived from the worked example below. |

What moves the price most
Worked example — $240,000 most-pay home (2,000 sq ft standard 3-bed/2-bath, crawl-space foundation, on land already owned, standard finishes): factory modules $125,000 (52%) + installation and button-up finishing $48,000 (20%) + utility hookups $21,000 (9%) + foundation $14,000 (6%) + delivery and crane set $12,000 (5%) + sales tax $10,000 (4%) + site prep $7,500 (3%) + permits and fees $2,500 (1%) = $240,000. Every line sits inside its published band. Land is excluded — add $10,000–$200,000+ for land (Angi); garage, deck, driveway and landscaping are extra too. Delivery and sales tax: HomeGuide notes both are often included in the factory unit price — this example assumes them billed separately (a factory quote), so do not treat this split as the only way builders quote. Where sources disagree: the average — Angi's dedicated cost guide says $240,000 (updated October 2026), while a different Angi article says $270,000; this page uses $240,000. Slab foundations — Angi lists slab at $5–$16 per sq ft, while HomeGuide says a modular home cannot sit on a monolithic slab because it needs under-floor space for connections. General-contractor cost — Angi says 20–40% of total ($48,000–$96,000), but its own task list sums far below that and HomeGuide's estimator has no separate GC line, so no GC percentage is published here; GC coordination sits inside the installation line. Timeline: 2–6 months total (HomeGuide), on-site set-up 4–6 weeks; Angi says 4–6 months, up to about 8 with permitting or manufacturing delays. Cheaper than site-built: 10–20% less (HomeGuide); Angi puts the average stick-built home at $323,000 vs $240,000 modular. Related costs: tiny house construction, detached garage construction, pole barn construction and home addition.
Costs in your city
Labor is the biggest variable in any remodel, and labor is local — the same bathroom can price very differently in Houston than in Boston. We are adding city editions metro by metro, each with its own labor index, permit notes and climate factors, written for that city rather than copied from this page. Wave 1: Houston, Dallas–Fort Worth, Phoenix, Atlanta, Miami–South Florida, Orlando, Tampa, Charlotte, Austin and San Antonio. Until your city's page is live, use the national range here and weight it the way contractors do: Sun Belt labor often prices near or below the national middle, while coastal California and the Northeast metros often price well above it.

Frequently asked questions
How much does a modular home cost?
Most homeowners pay $160,000–$320,000, with Angi's 2026 national average at $240,000. Installed cost runs $80–$160 per sq ft (Angi and HomeGuide agree). Land is not included — add $10,000–$200,000+ (Angi).
Is a modular home the same as a manufactured (mobile) home?
No. A modular home is built to the same local and state building codes as a site-built home and set on a permanent foundation. A manufactured home is built to federal HUD code on a steel chassis. Modular homes qualify for traditional mortgages (conventional, FHA, VA, USDA) once on a permanent foundation; manufactured homes often do not.
Does the price include land?
No — the $240,000 average excludes land entirely (Angi). Land adds $10,000–$200,000+ depending on plot size, condition and location. A garage ($19,600–$28,200), deck ($4,000–$10,000), driveway and landscaping are also extra (HomeGuide).
How long does it take to build a modular home?
2–6 months total (HomeGuide), with on-site set-up taking 4–6 weeks; the factory builds 80–90% of the home off-site. Angi says 4–6 months, up to about 8 months with permitting or manufacturing delays. A comparable site-built home takes 6–12 months.
Can you get a mortgage for a modular home?
Yes — modular homes qualify for conventional, FHA, VA and USDA loans once set on a permanent foundation (Rocket Mortgage; Realtor.com). Down payments are typically higher than the 20% standard for site-built homes (HomeGuide).
Can a modular home go on a slab foundation?
The sources disagree: Angi lists slab at $5–$16 per sq ft as a valid option, while HomeGuide states a modular home cannot be placed on a monolithic slab because it needs space under the floor for HVAC, electrical and plumbing connections. Check with your manufacturer and local code before choosing.






