Home › Cost Guides › HVAC Maintenance
Cost Guide

How Much Does an HVAC Maintenance Cost? (2026)

By Ahsan ul Haq · Last updated: 11 November 2026 · Planning estimate — not a quote · How we estimate

Typical range
$175 – $300
Most homeowners pay around $250 · Annual HVAC maintenance typically costs $175 – $300 for a one-system plan with two seasonal tune-ups, with about $250 the figure most plans land near — Angi prices annual tune-ups at $175–$350 with a $250 average, and HomeGuide prices an annual service at $150–$300. This guide prices a maintenance plan for one system — inspection, cleaning and tune-ups for heating and cooling — not repairs, which are billed separately.
typical
$175$300
Low end = minor scope  ·  marker = typical middle  ·  high end = major scope. Add 10–20% contingency to any budget.
HVAC technician kneeling beside a large outdoor unit with manifold gauges in hand

HVAC Maintenance cost at a glance

  • Typical range: $175 – $300
  • Most homeowners pay: around $250
  • Prices vary most by: Technician labor, two seasonal visits (50–65% of the budget)

Cross-checked against three published sources for this project. Sources used for this page: Angi's HVAC maintenance guide, updated July 9, 2026, as cited by Bryant's AC maintenance guide (annual tune-ups $175–$350, a $250 average; AC-only tune-up $75–$200, extended heating-and-cooling service up to $500; DIY filter and cleaning supplies $20–$75 a year) and by NorthAir's October 2026 summary of the same Angi guide ($175–$350, $250 average, broader $100–$650 range in the body), HomeGuide's HVAC and furnace cost data (tune-up $70–$200; annual service $150–$300; annual plans $150–$500; HVAC labor $75–$150 an hour; coil cleaning $100–$400; a thorough tune-up 1–2 hours) and This Old House's HVAC maintenance cost guide (annual maintenance visit $75–$200; AC $70–$200, furnace $70–$200, heat pump $75–$150 per visit; annual plan $75–$150, bi-annual plan $150–$300). The page's typical band is the Angi–HomeGuide–This Old House plan overlap at $175–$300, and its $250 most-pay figure is Angi's published average. Sources last checked: October 2026 — This Old House, HomeGuide, Angi. How we calculate these costs

Cost by scope

HVAC Maintenance cost ranges by scope — chart of the table below
ScopeTypical costWhat it includes
Single tune-up visit, one system$75 – $200The cheap end: This Old House prices an annual maintenance visit at $75–$200, and HomeGuide prices a tune-up at $70–$200 — one seasonal visit, inspection and basic cleaning, no plan benefits
Annual maintenance plan, one system — the typical job$175 – $300The shared band: Angi's $175–$350 annual tune-up band against HomeGuide's $150–$300 annual service and This Old House's $150–$300 bi-annual plan — two seasonal visits, priority booking and a repair discount in most plans
Two systems or premium plan$300 – $500The expensive end: HomeGuide prices annual plans up to $500, and multi-system homes pay per system — two units, or a premium plan with parts-and-labor coverage up to a cap

Where the money goes

Part of the jobShareNote
Technician labor, two seasonal visits50–65% of totalThe largest share: HomeGuide prices HVAC labor at $75–$150 an hour, and a thorough tune-up takes 1–2 hours per visit
Filters and consumables10–20% of totalStandard filters are changed at every visit; specialty filters cost more, and Bryant prices DIY filter and cleaning supplies at $20–$75 a year for comparison
Cleaning supplies and coil treatment10–20% of totalCoil cleaning alone runs $100–$400 in HomeGuide's tables, and the plan visit includes the cleaning that keeps efficiency from sliding
Report, scheduling and plan administration5–15% of totalThe written findings, priority booking and repair discount that separate a plan from two ad-hoc visits
Technician labor, two seasonal visits · 50–65%Filters and consumables · 10–20%Cleaning supplies and coil treatment · 10–20%Report, scheduling and plan administration · 5–15%
Estimator’s note: on an hvac maintenance, technician labor, two seasonal visits is usually where quotes swing most (50–65% of total of a typical budget). Ask every contractor to itemize that line in writing — totals are only comparable when that part is.
The check itself — refrigerant gauges, electrical connections and coil condition are what the visit's labor line buys, at $75–$150 an hour in HomeGuide's tables.
The check itself — refrigerant gauges, electrical connections and coil condition are what the visit's labor line buys, at $75–$150 an hour in HomeGuide's tables.

What moves the price most

Visit count is first: a single $75–$200 visit is not a plan, and a $175–$300 plan only beats two single visits if both seasonal visits actually happen. System type is second: This Old House prices an air conditioner at $70–$200, a furnace at $70–$200 and a heat pump at $75–$150 per visit — and heat pumps need two visits a year by design, so they price as a plan by default. Age and condition are third: an older system takes longer to inspect and clean, and a neglected system often turns its first plan visit into a repair quote. Plan terms are fourth: most plans include priority booking and a 10–20% repair discount, but parts are almost never free — the plan covers the visit, not what the visit finds. For the breakdowns themselves, see our furnace repair guide and our AC repair guide.

Work out your quantities: before you compare quotes, run your measurements through our free remodeling calculators (paint, tile, concrete and flooring) — each one shows its formula and runs entirely in your browser.

Worked example: how a typical hvac maintenance budget breaks down

Take the typical job — a one-system annual plan: a spring cooling tune-up and a fall heating tune-up, filters changed at both visits, written findings after each. Here is a realistic $250 version of that annual invoice, at Angi’s published average: The budget below totals $250 — the "most homeowners pay around" figure from the top of this page — split using this page's own cost breakdown. It shows how a real quote at that level is usually composed; every line is built from the ranges on this page, and it is an illustration, not a quote for your project.

Line itemExample budget
Technician labor, two seasonal visits$150
Filters and consumables$40
Cleaning supplies and coil treatment$35
Report and plan administration$25
Total$250

What most people get wrong

  • Buying a plan and skipping the second visit — the plan only beats two single visits if both seasonal visits happen, and a skipped fall visit is a paid-for service never received.
  • Comparing a single-visit quote with a two-visit plan on the total — a $75–$200 single visit and a $175–$300 plan are different scopes, and only the visit count makes them comparable.
  • Assuming parts are included — plans cover the visits, priority booking and usually a repair discount, not what the visit finds; a failed capacitor or contactor is still a repair bill.
  • Treating a cheap tune-up as a full service — an inspection-only visit is not the same as a cleaning-and-check visit, so ask for the task list before comparing prices.

Costs in your city

HVAC maintenance is technician-labor pricing around a national plan: the same one-system plan quotes near the bottom of the band where crew rates are low and toward the top in a high-cost metro, while filters ship nationally. Climate travels with the city — hot markets weight the cooling visit and cold markets the heating visit, and heat-pump homes need both by design. Housing age travels too: older systems take longer to inspect and clean, and neglected systems turn a first plan visit into a repair quote. Ask each bidder for the visit count, the task list, and whether filters and parts are included.

How this estimate was built: HVAC maintenance figures were cross-checked across Angi’s HVAC maintenance guide as cited by Bryant and by NorthAir’s October 2026 summary, HomeGuide’s HVAC and furnace cost data and This Old House’s HVAC maintenance cost guide. Angi publishes annual tune-ups at $175–$350 with a $250 average and an AC-only tune-up at $75–$200, HomeGuide publishes a tune-up at $70–$200 with an annual service at $150–$300 and plans to $500, and This Old House publishes $75–$200 per visit with a bi-annual plan at $150–$300 — so the typical band is drawn on the plan overlap, and single visits and two-system plans are tiered separately. Checked November 2026. Full method: How We Estimate Costs.
Coil and connection work up close — cleaning supplies and coil treatment sit inside the plan visit, and coil cleaning alone runs $100–$400 in HomeGuide's tables.
Coil and connection work up close — cleaning supplies and coil treatment sit inside the plan visit, and coil cleaning alone runs $100–$400 in HomeGuide's tables.

Frequently asked questions

How much does HVAC maintenance cost per year?

Angi prices annual tune-ups at $175–$350 with a $250 average, and HomeGuide prices an annual service at $150–$300. This page's typical band is $175–$300, with about $250 the figure most one-system plans land near.

How much does a single tune-up cost?

This Old House prices an annual maintenance visit at $75–$200, and HomeGuide prices a tune-up at $70–$200. Angi prices an AC-only tune-up at $75–$200, with extended heating-and-cooling service up to $500.

Is a maintenance plan worth it versus paying per visit?

Two single visits at $75–$200 each run $150–$400, against a $175–$300 plan that usually adds priority booking and a repair discount. The plan wins when both seasonal visits happen; it loses when the second visit is skipped.

What does a tune-up include?

Inspection, cleaning, a filter change, refrigerant and electrical checks and a heat-exchanger inspection on a furnace visit. Repairs and parts found during the visit are billed separately in every guide.

Does maintenance keep the warranty valid?

Many manufacturers require annual professional maintenance, and HomeGuide notes this for furnaces. Check the warranty terms on your own unit — a skipped year can be the reason a claim is refused.

Before you sign: get the visit count and the task list in writing, confirm whether filters and parts are included, ask what the repair discount and priority terms actually cover, and keep a 10–20% contingency separate from the contract price.

Ahsan ul Haq — Editor, Remodel Cost Hub

Ahsan compiles and edits the cost guides on Remodel Cost Hub, cross-checking every range against at least three published sources before it is published — the full method is on our Methodology page. Spot an error on this page? Send a correction.

HVAC Maintenance cost range graphic
Save this range for later: Pin it on Pinterest

Related cost guides

Close-up of a white finned radiator

Boiler Repair Cost

$200 – $660

A typical boiler repair lands at $200–$660 — the honest overlap of Angi’s most-pay range ($190–$660), Modernize’s typical range ($200–$1,000), Fixr’s oil-boiler repair range ($150–$750) and McQuillan Home Services’ standard repairs ($150–$750). The most-pay figure, $425, is Angi’s national average across 5,251 verified projects (updated September 2026) — the only whole-market single-point average among the independent sources. Fixr’s $450 is electric-boiler-only and is not used as a general average.

Outdoor heat pump unit standing beside a modern house

Heat Pump Repair Cost

$161 – $650

A typical air-source heat pump repair lands at $161–$650 — the honest overlap of Angi $161–$661, Fixr $150–$650 and Modernize $150–$650, a band all three sources support within $11 at each end. The most-pay figure, $400, is published as a national average by both Fixr and Modernize; Angi publishes around $410 from 4,007 verified projects (updated October 2026). Figures here are for residential air-source work only: geothermal and hybrid figures in Fixr and Modernize run higher and are not folded into the headline.

Outdoor security camera mounted above a brick wall and gate

Security System Installation Cost

$300 – $1,236

A professionally installed, monitored home security system lands at $300–$1,236 upfront, averaging $746 across 1,667 verified Angi projects (updated October 2026). That upfront figure is equipment plus installation; professional monitoring is an ongoing $20–$60 a month on top for most plans, and added cameras, sensors and smart devices — plus activation and permits — can take the all-in upfront figure toward $2,500. Homewyse's defined-scope wireless install (8 door/window contacts, 3 motion detectors, base unit and siren) at $805–$1,141 sits inside the same band, corroborating the average from a different method.

Four tall water treatment tanks with blue piping and a pressure gauge

Whole-House Water Filtration System Cost

$1,100 – $3,500

A standard whole-house water filtration system lands at $1,100–$3,500 installed — Angi's average installed band, sitting inside HomeGuide's wider $850–$5,400 spread and Dierolf Plumbing's $800–$6,000 range for professionally installed systems. About $2,000 is the most-cited average (Forbes Home's average as reported; an Angi-derived national average of $2,078 from Bob Vila lands in the same place). The tier, not the brand, decides the price: carbon filtration alone is the cheap end, adding UV and a softener moves the job up, and whole-house reverse osmosis is a separate $4,800–$8,000 category (HomeGuide) that most homes do not need.

Sunroom with wooden rocking chairs, glass doors and large windows

Sunroom Addition Cost

$20,000 – $80,000

A professionally built sunroom lands at $20,000–$80,000, the overlap of Angi's $22,000–$75,000 typical band, HomeGuide's $20,000–$80,000 four-season band and CostHelper's range up to $70,000 for a complete four-season installation. Angi's average is about $47,000, and the common installed rate is $150–$300 per sq ft inside HomeGuide's broader $100–$350 band. The season rating is the biggest lever: three-season rooms run $10,000–$40,000 while four-season rooms run $25,000–$80,000, and a fully specified custom 200 sq ft four-season build was benchmarked by Remodeling Magazine (via CostHelper) at $66,046–$83,463 — about $330–$417 per sq ft — showing how spec pushes past the general range.

Technician working on heating pipework and valves beneath a white tank

Water Heater Repair Cost

$225 – $750

A water heater repair typically lands at $225 – $750, with about $500 the most-pay figure — the honest overlap of Angi's national average of $616 across 16,111 verified projects (most paying $228–$1,017), HomeGuide's average of $455 inside a $150–$700 band (349 reported project costs), and Fixr's average of $450 inside a $150–$750 band. The part decides the position inside the band: a heating element or thermostat is a small-parts job, while a gas valve, burner or tankless component is the expensive end — and once a major repair approaches the cost of a new unit, replacement usually wins.