Security System Installation cost at a glance
- Typical range: $300 – $1,236
- Most homeowners pay: around $746
Cross-checked against four published sources for this project. Sources used for this page: Angi's home security system installation cost guide (updated October 2026, 1,667 verified projects), NerdWallet's home security system cost guide (updated October 2025), This Old House's home security system cost guide (updated June 2026) and Homewyse's 2026 home security system installation cost calculator. Sources last checked: October 2026 — This Old House, NerdWallet, Angi, Homewyse. How we calculate these costs
Cost by scope

| Scope | Typical cost | What it includes |
|---|---|---|
| Basic DIY — self-monitored kit | $130 – $500 | A starter kit you install yourself — hub, a couple of door sensors and a motion sensor — with app alerts and no professional monitoring, or $4–$20 a month if you add video recording and smart alerts |
| Standard monitored — the typical band | $300 – $1,236 | The Angi band itself: a full starter kit plus the sensors and cameras a whole home actually needs, professionally installed or with installation waived under a monitoring contract, plus $20–$60 a month for 24/7 monitoring |
| Whole-home wired / smart premium | $1,500 – $3,000 | Wired installation throughout the house ($800–$1,600 for the wiring work alone) with many cameras and sensors, smart locks, smoke and CO sensors and automation; full provider equipment packages run $599–$1,790 before installation |
Where the money goes
| Part of the job | Share | Note |
|---|---|---|
| Starter kit / base equipment | $200 – $400 | Angi's basic-kit band; the typical household actually spends about $700 once enough devices are added to cover the whole home |
| Professional installation | $120 – $600 | Angi's labour band when charged separately; This Old House's provider flat fee is $99–$199, and many national providers waive installation under a monitoring contract |
| Cameras | $40 – $400 each | Angi's per-camera equipment band; most cameras cost under $200, and a 4-camera installed set runs $500–$650 wireless or $600–$2,000 wired (Fixr, supporting source) |
| Door / window sensors | $25 – $300 each | Angi's per-sensor band; each additional feature generally adds $25–$300 to the total |
| Glass-break sensors | $100 – $200 each | Angi's band for glass-break detection |
| Smart lock | $150 | Angi's single figure for a smart lock add-on |
| Smoke / fire / CO alarms | $35 – $100 each | Angi's smart-alarm band |
| Activation fee | $0 – $230 | Angi's activation band; This Old House puts the ceiling at $199 |
| Alarm permit | $25 – $100 | Angi's permit band, sometimes with an annual renewal; a hardwired system may also need an electrical permit at $10–$500 |
| Professional monitoring | $20 – $60 per month | The band where Angi ($10–$65), This Old House ($15–$60) and NerdWallet ($20–$80) overlap for full professional monitoring; basic plans can start near $10–$15 and premium video plans reach $65–$80 |

What moves the price most
Wired vs wireless is the first fork: wired systems always need a professional, involve cutting into walls, and cost $800–$1,600 to install, while wireless systems are cheaper and faster to install but carry monthly fees that change the long-term budget. Entry-point count is the second: starter kits hold 2–6 pieces and rarely cover a whole house, and each added feature costs $25–$300. The monitoring model and contract matter as much as the hardware — a $0 install often means a 1–3+ year commitment, and financed equipment bundled into the monthly bill makes the monthly figure look lower than buying outright. Cameras, resolution and indoor vs outdoor placement push cost up with video storage plans, as do smart add-ons (locks, smoke/CO/water sensors, automation). Activation, permits and false-alarm fines are locality-dependent extras. One offset is real but not guaranteed: Angi and NerdWallet note homeowners-insurance discounts of up to 20% for a monitored system, insurer-dependent.
Costs in your city
Labor is the biggest variable in any remodel, and labor is local — the same bathroom can price very differently in Houston than in Boston. We are adding city editions metro by metro, each with its own labor index, permit notes and climate factors, written for that city rather than copied from this page. Wave 1: Houston, Dallas–Fort Worth, Phoenix, Atlanta, Miami–South Florida, Orlando, Tampa, Charlotte, Austin and San Antonio. Until your city's page is live, use the national range here and weight it the way contractors do: Sun Belt labor often prices near or below the national middle, while coastal California and the Northeast metros often price well above it.

Frequently asked questions
How much does a professionally installed, monitored home security system cost?
Typically $300–$1,236 upfront, averaging about $746 (Angi, 1,667 verified projects), plus $20–$60 a month for professional monitoring. Added cameras, sensors and smart devices, plus activation and permits, can take the all-in upfront figure toward $2,500.
What does the equipment alone cost?
A basic kit runs about $200–$400, but most households end up spending around $700 once enough sensors and cameras are added to cover the whole home. Full provider packages run $599–$1,790 before installation.
How much is professional installation?
Often nothing upfront when it is bundled into a monitoring contract. When charged separately, expect roughly $99–$199 as a provider flat fee (This Old House), or $120–$600 from a local pro depending on how many devices need wiring (Angi). Wired systems always need a pro and typically cost $800–$1,600 to install in total.
How much is monthly monitoring, and is self-monitoring free?
Self-monitoring is free on most systems, or $4–$20 a month if you want video recording and smart alerts. Professional 24/7 monitoring typically costs $20–$60 a month; basic plans can start near $10–$15 and premium video plans can reach $65–$80.
How much does each extra camera or sensor add?
Cameras typically cost under $200 each for equipment (range $40–$400); door/window sensors $25–$300 each; glass-break sensors $100–$200 each. A 4-camera installed set runs roughly $500–$650 wireless or $600–$2,000 wired (Fixr, supporting source).
Are there hidden or extra costs beyond equipment and monitoring?
Yes — activation ($0–$230), an alarm permit ($25–$100, sometimes renewed annually), and an electrical permit ($10–$500) for hardwired work. Many monitored systems also require a 1–3+ year contract, and cancelling early can trigger a fee, so the monthly price alone does not show the full commitment.






