Home › Cost Guides › Sunroom Addition
Cost Guide

How Much Does a Sunroom Addition Cost? (2026)

By Ahsan ul Haq · Last updated: 11 November 2026 · Planning estimate — not a quote · How we estimate

Typical range
$20,000 – $80,000
Most homeowners pay around $47,000 · A professionally built sunroom lands at $20,000–$80,000, the overlap of Angi's $22,000–$75,000 typical band, HomeGuide's $20,000–$80,000 four-season band and CostHelper's range up to $70,000 for a complete four-season installation. Angi's average is about $47,000, and the common installed rate is $150–$300 per sq ft inside HomeGuide's broader $100–$350 band. The season rating is the biggest lever: three-season rooms run $10,000–$40,000 while four-season rooms run $25,000–$80,000, and a fully specified custom 200 sq ft four-season build was benchmarked by Remodeling Magazine (via CostHelper) at $66,046–$83,463 — about $330–$417 per sq ft — showing how spec pushes past the general range.
typical
$20,000$80,000
Low end = minor scope  ·  marker = typical middle  ·  high end = major scope. Add 10–20% contingency to any budget.
Sunroom with wooden rocking chairs, glass doors and large windows

Sunroom Addition cost at a glance

  • Typical range: $20,000 – $80,000
  • Most homeowners pay: around $47,000
  • Per square foot: $150–$300 per sq ft

Cross-checked against five published sources for this project. Sources used for this page: Angi's and HomeGuide's sunroom cost guides (same Angi family — counted as one source), CostHelper's sunroom cost guide citing Remodeling Magazine's 200 sq ft custom four-season benchmark, and the Journal of Light Construction's Cost vs. Value sunroom data. Sources last checked: October 2026 — Remodeling Magazine, HomeGuide, Angi, CostHelper, Cost vs. Value. How we calculate these costs

Cost by scope

Sunroom Addition cost ranges by scope — chart of the table below
ScopeTypical costWhat it includes
Budget — kit or small three-season$8,000 – $25,000A kit on an existing base (kit materials $1,500–$8,000, HomeGuide) or a small installed prefab ($5,500–$30,000, Angi); foundation, labour, permits and any heating or cooling sit on top of the kit price
Mid-range — custom three-season or modest four-season$25,000 – $55,000The middle of Angi's typical band and HomeGuide's custom three-season $15,000–$50,000 range: site-built walls and glazing with standard finishes
High-end — full four-season, solarium or conservatory$55,000 – $100,000Anchored by Remodeling's 200 sq ft custom four-season $66,046–$83,463 benchmark and HomeGuide's solarium $30,000–$100,000 band; conservatories run to $150,000

Where the money goes

Part of the jobShareNote
Foundation / slab$1,000 – $6,000HomeGuide's foundation total at $5–$15 per sq ft; reusing a sound existing deck or patio is the biggest single saving, though reinforcing it may still be needed
Glass and windows$3,500 – $12,000HomeGuide's figure for about 10 windows; single-pane $290–$460, double-pane $450–$1,000 and triple-pane $600–$1,300 per window
Roofing$500 – $7,000HomeGuide's roofing band: asphalt $500–$1,000, metal $1,200–$2,400, slate or clay $2,200–$4,500, glass $3,000–$7,000
Electrical$250 – $600HomeGuide's wiring figure; a finished outlets-and-lighting package runs $1,200–$2,500 in secondary contractor coverage — a scope difference, not a contradiction
Heating and cooling (mini-split)$3,000 – $6,000The overlap for a ductless mini-split (HomeGuide $2,000–$6,000; secondary coverage $3,000–$5,500); duct extension runs $10–$20 per linear foot
Insulation$300 – $1,500HomeGuide's insulation band at $1–$4 per sq ft; three-season rooms often need little or none, four-season rooms need the full envelope
Flooring and interior finishing$500 – $5,000HomeGuide's interior-finishing total; flooring alone runs $2–$15 per sq ft
Doors$700 – $2,400HomeGuide's French and sliding-glass door band; bi-fold doors run $3,000–$12,000
Permits and design$200 – $500HomeGuide's building-permit band; permits plus stamped structural drawings commonly run $800–$2,000 in secondary guides
A finished four-season room needs the full envelope: insulation $300–$1,500, a mini-split at $3,000–$6,000 in the overlap band, and electrical work — the lines that separate a $25,000 room from a $55,000 one
A finished four-season room needs the full envelope: insulation $300–$1,500, a mini-split at $3,000–$6,000 in the overlap band, and electrical work — the lines that separate a $25,000 room from a $55,000 one

What moves the price most

Season rating is the single biggest driver: three-season work runs $80–$230 per sq ft and four-season $200–$400 (HomeGuide), roughly doubling the rate for insulation, insulated glass, electricity and heating/cooling. Size and shape come next — totals rise with square footage, but small rooms get no per-sq-ft discount (fixed labour, permits and crew days), and angled, octagonal, gable or hip roofs cost more than simple rectangles with shed roofs. Glass type and amount follow: single-pane vs double-pane low-E vs triple-pane or impact glass, floor-to-ceiling or custom panels, and a glass roof as the most expensive roof option. Foundation situation (sound existing deck/patio vs new slab vs pier-and-beam or crawl space), heating and cooling choice (none vs duct extension vs mini-split vs full HVAC — a glass-heavy room overheats in summer and loses heat in winter without better glazing, shading and ventilation), framing material (aluminium/vinyl/resin cheaper for three-season; wood or insulated vinyl for four-season), roof tie-in, and location (up to +50% in high-cost states, HomeGuide) complete the picture. Panel upgrades ($850–$1,700), skylights, blinds or shutters, and radiant floor heat ($6–$15 per sq ft) are the usual extras.

Work out your quantities: before you compare quotes, run your measurements through our free remodeling calculators (paint, tile, concrete and flooring) — each one shows its formula and runs entirely in your browser.

Costs in your city

Labor is the biggest variable in any remodel, and labor is local — the same bathroom can price very differently in Houston than in Boston. We are adding city editions metro by metro, each with its own labor index, permit notes and climate factors, written for that city rather than copied from this page. Wave 1: Houston, Dallas–Fort Worth, Phoenix, Atlanta, Miami–South Florida, Orlando, Tampa, Charlotte, Austin and San Antonio. Until your city's page is live, use the national range here and weight it the way contractors do: Sun Belt labor often prices near or below the national middle, while coastal California and the Northeast metros often price well above it.

How this estimate was built: the range on this page is a synthesis of at least three published industry sources (national cost guides and the Remodeling Magazine Cost vs. Value data among them), cross-checked in October 2026. We publish planning ranges, never a single pretend-precise price. Full method: How We Estimate Costs.
Four-season rooms that count as legal living space return more at resale — roughly 50% in Angi's figures and 46–61% in Cost vs. Value editions — than three-season rooms, which generally do not count as living area
Four-season rooms that count as legal living space return more at resale — roughly 50% in Angi's figures and 46–61% in Cost vs. Value editions — than three-season rooms, which generally do not count as living area

Frequently asked questions

How much does a sunroom addition cost?

A professionally built sunroom typically lands between $20,000 and $80,000, with Angi's average around $47,000 and its typical band $22,000–$75,000. Kit-only or very small builds can start near $5,000–$10,000, and high-end custom glass rooms run past $100,000.

What is the difference in cost between a 3-season and a 4-season sunroom?

A 3-season room generally runs $10,000–$40,000 ($80–$230 per sq ft) and is built for spring-through-fall use, usually without full insulation or permanent heating/cooling. A 4-season room runs $25,000–$80,000 ($200–$400 per sq ft) because it adds insulation, insulated glass, electricity and heating/cooling, and is built as usable living space year-round.

How much does a sunroom cost per square foot?

Expect roughly $150–$300 per sq ft as the common installed range, inside a broader $100–$350 band. Three-season work sits lower ($80–$230) and four-season higher ($200–$400); a fully specified custom 200 sq ft four-season build was benchmarked at $66,046–$83,463, or about $330–$417 per sq ft, showing how spec pushes past the general range.

Is a prefab sunroom kit cheaper than a custom-built sunroom?

Yes on materials: kits alone run about $1,500–$8,000, and installed prefab rooms about $5,500–$30,000 (up to $50,000 for high-end dealer models). The kit price is not the finished price — foundation, shipping, labour, permits, electrical and any heating/cooling are added on top, and installed totals often run well above the raw kit price.

Do I need a permit to add a sunroom, and what does it cost?

In most places, yes: an attached structure with a foundation and/or electrical work normally needs a building permit, sometimes plus zoning, electrical and heating/cooling permits. A permit alone is often $200–$500, but permits plus stamped structural drawings commonly run $800–$2,000.

Does a sunroom add value to a home?

It adds appeal and usable space, but it does not return its full cost. Angi cites roughly 20% return for a screen room and about 50% for a three- or four-season room; Cost vs. Value editions put recoupment roughly in the 46–61% range. Four-season rooms that count as legal living space tend to return more than three-season rooms, which generally do not count as living area — so build it for use, not as a pure investment.

Before you sign: get at least 3 written local quotes for the same written scope, confirm permits and who pulls them, and keep a 10–20% contingency separate from the contract price.

Ahsan ul Haq — Editor, Remodel Cost Hub

Ahsan compiles and edits the cost guides on Remodel Cost Hub, cross-checking every range against at least three published sources before it is published — the full method is on our Methodology page. Spot an error on this page? Send a correction.

Sunroom Addition cost range graphic
Save this range for later: Pin it on Pinterest

Related cost guides

Technician working on heating pipework and valves beneath a white tank

Water Heater Repair Cost

$225 – $750

A water heater repair typically lands at $225 – $750, with about $500 the most-pay figure — the honest overlap of Angi's national average of $616 across 16,111 verified projects (most paying $228–$1,017), HomeGuide's average of $455 inside a $150–$700 band (349 reported project costs), and Fixr's average of $450 inside a $150–$750 band. The part decides the position inside the band: a heating element or thermostat is a small-parts job, while a gas valve, burner or tankless component is the expensive end — and once a major repair approaches the cost of a new unit, replacement usually wins.

Modern house with large blue-glass windows under a clear sky

Window Repair Cost

$175 – $600

A window repair typically costs $175 – $600, with about $400 the most-pay figure — the point where Angi's national average of $405 (most paying $178–$633 across 3,031 verified projects) and Fixr's average of $400 agree, and HomeGuide's average band of $175–$600 lands exactly on top. The problem decides the position: a screen or latch is a small-parts job, while a rotted frame, a large pane of glass or a bay or bow window is the expensive end — and full replacement, at $400–$2,000, is a different job from repair altogether.

White toilet with its tank against a marble-patterned wall

Toilet Repair Cost

$150 – $400

A toilet repair typically costs $150 – $400, with about $275 the most-pay figure — Angi's national average of $271 inside a $150–$391 band, with Thumbtack's national average of $160–$390 and a typical simple repair around $240 corroborating it from a different method. Labour runs $85–$250 (Home Depot's pro-referral figure) and materials for a bowl, tank or whole toilet $100–$400, so the part decides the position: a seat or handle is a small job, while a flange, a pipe or a wall-hung unit is the expensive end.

Chrome faucet with braided supply hoses and a wrench on a blueprint

Faucet Repair Cost

$180 – $350

A faucet repair typically costs $180 – $350, with about $270 the most-pay figure — the zone where Angi's national average of $270 (most paying $100–$400, updated September 2026), Homewyse's basic estimate of $269–$324 per faucet and Thumbtack's faucet-service band of $180–$480 all land. The failed part decides the position inside the band: a washer or O-ring costs a few dollars, while a cartridge or a full shower valve is the expensive end — and labour, not parts, is most of the bill.

Yellow tanker truck with a round tank parked by the water

Septic Tank Pumping Cost

$300 – $600

Septic tank pumping typically costs $300 – $600, with about $420 the most-pay figure — the point where Angi's national average of $428 across 6,850 verified projects (most paying $292–$565, updated October 2026), Fixr's average of $400 (range $300–$600) and This Old House's average of $420 (range $290–$560) all cluster. Tank size decides the position: a small tank is a few hundred dollars and a large family tank is the expensive end — and pumping is maintenance, done every 3–5 years, not a repair.

Worker inside a large concrete tank ring, seen from above

Septic Inspection Cost

$250 – $450

Standard inspection of tank, baffles and drain field, with a written report