Home › Cost Guides › Basement Window Installation
Cost Guide

How Much Does a Basement Window Installation Cost? (2026)

By Ahsan ul Haq · Last updated: 11 November 2026 · Planning estimate — not a quote · How we estimate

Typical range
$400 – $1,000
Most homeowners pay around $700 · One standard basement window replaced in its existing opening — unit, fitting and sealing together, with no cutting into the foundation
typical
$400$1,000
Low end = minor scope  ·  marker = typical middle  ·  high end = major scope. Add 10–20% contingency to any budget.
Bright finished basement with carpet and wainscoting, a support pole, and three small high windows along the upper wall showing greenery outside

Basement Window Installation cost at a glance

  • Typical range: $400 – $1,000
  • Most homeowners pay: around $700
  • Prices vary most by: Installation labor (30–50% of the budget)

Cross-checked against three published sources for this project. Sources used for this page: Angi's basement window replacement cost guide, updated October 1, 2026 (national average $700 per window, most $400–$1,000; labor $150–$600 per window; prefab units $100–$800, custom units $150–$1,200), Today's Homeowner's basement window replacement guide (DIY $100–$700 per window; professional installation $200–$1,000 per window; labor $40–$100 per hour; costs sourced from Angi and HomeAdvisor contractor estimates) and EngineerFix's basement window cost guide (vinyl hopper units $100–$200; sliding windows $150–$800; awning windows 15–25% more than sliders; vinyl units $100–$650; egress units $500–$2,000+; basic replacement labor $150–$400 per window; cutting a new opening $500–$2,000 in labor; complex installs $700–$1,500 per window in labor; pro rates $50–$120 per hour). Angi's egress window guide corroborates the premium tier at $2,700–$5,900 per window, and Fixr at $2,500–$5,000 with a $3,500 average for a prefab below-ground install. Synthesized typical = Angi's most-pay band at $400–$1,000 per window, with $700 most-pay at Angi's published average. Checked November 2026.. Sources last checked: October 2026 — HomeAdvisor, Fixr, Angi. How we calculate these costs

Cost by scope

Basement Window Installation cost ranges by scope — chart of the table below
ScopeTypical costWhat it includes
Budget — prefab vinyl hopper, same opening$300 – $500EngineerFix prices a prefab vinyl hopper unit at $100–$200, and Angi prices prefab units at $100–$800 with labor at $100–$300 per window.
Standard — one window installed, pro-fitted$400 – $1,000The typical project on this page: Angi's most-pay band is $400–$1,000 per window with a $700 average.
Premium — egress window with well and excavation$2,700 – $5,900Angi prices egress window installation at $2,700–$5,900 per window, and Fixr at $2,500–$5,000 with a $3,500 average for a prefab below-ground install.

Where the money goes

Part of the jobShareNote
The window unit25–50% of totalAngi prices prefab units at $100–$800 and custom units at $150–$1,200; EngineerFix prices vinyl hopper units at $100–$200 and sliders at $150–$800
Installation labor30–50% of totalAngi prices labor at $150–$600 per window; EngineerFix prices a basic replacement at $150–$400 per window in labor
Window well & drainage0–25% of totalZero on a like-for-like swap; Angi's well figures run $200–$600 for metal, $250–$800 for plastic and $750–$2,500 for concrete
Permits & structural work0–20% of totalZero on a like-for-like swap; Fixr puts permits at $50–$250, and EngineerFix prices cutting a new opening at $500–$2,000 in labor alone
The window unit · 25–50%Installation labor · 30–50%Window well & drainage · 0–25%Permits & structural work · 0–20%
Estimator’s note: on a basement window installation, installation labor is usually where quotes swing most (30–50% of total of a typical budget). Ask every contractor to itemize that line in writing — totals are only comparable when that part is.
A basement room with a small high window near the ceiling: a prefab vinyl hopper unit like the one that fits an opening this size runs $100–$200 in EngineerFix's guide
A basement room with a small high window near the ceiling: a prefab vinyl hopper unit like the one that fits an opening this size runs $100–$200 in EngineerFix's guide

What moves the price most

Window type is the first lever: a vinyl hopper is the cheapest unit at $100–$200 in EngineerFix's guide, a slider runs $150–$800, an awning costs 15–25% more than a slider for its hardware, and an egress unit alone is $500–$2,000+. Prefab or custom is second: Angi prices prefab units at $100–$800 and custom units at $150–$1,200 — a 25–50% premium for a non-standard opening. Opening work is third: a like-for-like swap is a few hours, while cutting a new opening through a concrete or block foundation runs $500–$2,000 in labor alone in EngineerFix's guide. Egress code is fourth: a basement bedroom needs an egress window, and that turns a $400–$1,000 swap into Angi's $2,700–$5,900 egress job with excavation and a well. Worked example at the most-pay figure: window $300 + labor $300 + sealing & trim $50 + disposal $50 = $700. For the windows above ground, see our window replacement guide and our window glass replacement guide, and for the egress version see our egress window guide.

Work out your quantities: before you compare quotes, run your measurements through our free remodeling calculators (paint, tile, concrete and flooring) — each one shows its formula and runs entirely in your browser.

Costs in your city

Labor is the biggest variable in any remodel, and labor is local — the same bathroom can price very differently in Houston than in Boston. We are adding city editions metro by metro, each with its own labor index, permit notes and climate factors, written for that city rather than copied from this page. Wave 1: Houston, Dallas–Fort Worth, Phoenix, Atlanta, Miami–South Florida, Orlando, Tampa, Charlotte, Austin and San Antonio. Until your city's page is live, use the national range here and weight it the way contractors do: Sun Belt labor often prices near or below the national middle, while coastal California and the Northeast metros often price well above it.

How this estimate was built: the range on this page is a synthesis of at least three published industry sources (national cost guides and the Remodeling Magazine Cost vs. Value data among them), cross-checked in October 2026. We publish planning ranges, never a single pretend-precise price. Full method: How We Estimate Costs.
A small window set high on a yellow wall, half covered by a polka-dot curtain: size and height are what make a basement window cheap or dear — a custom unit runs $150–$1,200 in Angi's data
A small window set high on a yellow wall, half covered by a polka-dot curtain: size and height are what make a basement window cheap or dear — a custom unit runs $150–$1,200 in Angi's data

Frequently asked questions

How much does it cost to install a basement window?

Typically $400–$1,000 per window installed, with $700 the published average in Angi's guide — labor runs $150–$600 of that.

How much is a basement window unit alone?

Prefab units run $100–$800 and custom units $150–$1,200 in Angi's data; a vinyl hopper unit is $100–$200 in EngineerFix's guide.

How much is an egress window?

$2,700–$5,900 per window in Angi's guide and $2,500–$5,000 in Fixr's — excavation, the well and permits are most of that, not the window itself.

Can I replace a basement window myself?

DIY runs $100–$700 per window in Today's Homeowner's guide, but the opening has to be sealed against ground moisture — a pro job is $200–$1,000 per window including labor.

Do basement windows need a permit?

A like-for-like swap usually does not; cutting a new opening or adding an egress window does — Fixr puts permits at $50–$250.

Before you sign: get at least 3 written local quotes for the same written scope, confirm permits and who pulls them, and keep a 10–20% contingency separate from the contract price.

Ahsan ul Haq — Editor, Remodel Cost Hub

Ahsan compiles and edits the cost guides on Remodel Cost Hub, cross-checking every range against at least three published sources before it is published — the full method is on our Methodology page. Spot an error on this page? Send a correction.

Basement Window Installation cost range graphic
Save this range for later: Pin it on Pinterest

Related cost guides