Egress Window Installation cost at a glance
- Typical range: $2,700 – $5,900
- Most homeowners pay: around $4,200
- Prices vary most by: Excavation and foundation cutting (35–50% of the budget)
Cross-checked against four published sources for this project. Sources used for this page: Angi's egress window installation cost guide (2026, updated August 31, 2026, 760 verified projects: national average $4,236, most $2,723-$5,881 per window; labor $50-$120 per hour, 16-24 hours standard, 40+ hours complex; permits $100-$500, inspection $50-$300; wells metal $200-$600, plastic $250-$800, concrete $750-$2,500; cover $50-$500; drain $500-$2,000; finishes $300-$1,200; site preparation $500-$2,000; cleanup $100-$500; sizes 24x36 $2,500-$4,000, 30x48 $3,500-$6,000, 36x60 $5,000-$8,500, custom $6,000+; repairs $200-$1,000, full replacement $2,500-$8,000, 50% rule; return on investment 50-75%; code minimums 20 inches wide, 24 inches high, 5.7 sq ft net clear opening, sill no more than 44 inches above the floor), Modernize's egress window cost guide (2026: $2,600-$5,800 per window, national average $4,000; labor $70-$150 per hour; excavation $1,500-$3,000; basic well $100-$500, decorative well $500-$2,000+; basement egress $3,000-$6,000+, complex projects over $10,000) and Fixr's egress window cost data as summarized by Basement Playbook (October 2026: prefabricated below-ground installation $2,500-$5,000, average $3,500; above-ground prefabricated single-hung low case $900; custom awning below-ground high case $10,000; Bob Vila cutting through a wall or excavating about $1,500-$3,000 per window, materials $100-$700, installation $100-$250; This Old House $2,718-$5,878, average $4,216, cited in the same summary). Sources last checked: October 2026 — This Old House, Modernize, Fixr, Angi. How we calculate these costs
Cost by scope

| Scope | Typical cost | What it includes |
|---|---|---|
| Above-grade window or simple replacement — no excavation, no well | $900 – $2,500 | The cheap end: Fixr's low case is $900 for a prefabricated single-hung window installed above ground, where there is no excavation, no window well and no foundation cutting — a walk-out or daylight basement window, not a below-ground dig |
| Standard below-grade egress window — excavation, well and drainage | $2,700 – $5,900 | The shared band itself: Angi's $2,723–$5,881 band with its $4,236 average, inside Modernize's $2,600–$5,800 band, covering foundation cutting, excavation, a window well with drainage, the code-compliant window and permits |
| Oversized, custom or deep excavation — large openings and hard ground | $5,000 – $10,000 | The expensive end: Angi prices a 36-by-60-inch opening at $5,000–$8,500 and custom sizing at $6,000 or more, and Fixr's high case is $10,000 for a custom awning window below ground with excavation and a window well — deep wells, concrete wells and difficult soil all push toward this tier |
Where the money goes
| Part of the job | Share | Note |
|---|---|---|
| Excavation and foundation cutting | 35–50% of total | Bob Vila prices cutting through a wall or excavating at about $1,500–$3,000 per window, Modernize prices excavation alone at $1,500–$3,000, and Angi prices the crew at $50–$120 per hour for 16–24 hours on a standard job (40 or more on a complex one) — poured concrete costs more to cut than block, and this is the line that separates egress work from an ordinary window swap |
| Window unit, well and cover | 20–30% of total | Angi prices wells by material at $200–$600 for metal, $250–$800 for plastic and $750–$2,500 for concrete, with a well cover at $50–$500, and the code-compliant casement or slider unit itself is the cheapest part of the job — standard sizes stay near the bottom of this band, custom sizes move it up |
| Drainage and waterproofing | 10–20% of total | Angi prices installing a drain at $500–$2,000, and a well without a drain tied to the footing or a sump is the classic egress failure — this line is small against the dig and large against a flooded basement |
| Permits, inspection and interior finishing | 5–15% of total | Angi prices permits at $100–$500 with inspection fees of $50–$300 on top, and interior and exterior finishing (trim, drywall, paint) at $300–$1,200 — site preparation at $500–$2,000 and cleanup at $100–$500 sit inside this line on most quotes |

What moves the price most
Depth and excavation are the first driver: an above-grade window needs no dig and Fixr prices that case from $900, while a below-ground window needs excavation at $1,500–$3,000 (Modernize, Bob Vila) plus foundation cutting — the groundwork, not the window, is most of the bill. Size is second: Angi's size table runs $2,500–$4,000 for a 24-by-36-inch opening that meets minimum code, $3,500–$6,000 for 30 by 48 inches, $5,000–$8,500 for 36 by 60 inches and $6,000 or more for custom — bigger openings mean more cutting, a bigger well and more finishing. Well material is third: Angi prices metal wells at $200–$600, plastic at $250–$800 and concrete at $750–$2,500, so the well alone can swing the total by over $1,000. Drainage is fourth: Angi prices a drain at $500–$2,000, and skipping it is the saving that floods basements. Code, permits and finishing close the bill: permits at $100–$500 plus inspection at $50–$300 (Angi), with finishing at $300–$1,200 — and a room without a compliant egress window cannot legally be listed as a bedroom.
Costs in your city
Labor is the biggest variable in any remodel, and labor is local — the same bathroom can price very differently in Houston than in Boston. We are adding city editions metro by metro, each with its own labor index, permit notes and climate factors, written for that city rather than copied from this page. Wave 1: Houston, Dallas–Fort Worth, Phoenix, Atlanta, Miami–South Florida, Orlando, Tampa, Charlotte, Austin and San Antonio. Until your city's page is live, use the national range here and weight it the way contractors do: Sun Belt labor often prices near or below the national middle, while coastal California and the Northeast metros often price well above it.

Frequently asked questions
How much does egress window installation cost?
Typically $2,700–$5,900 per window, with about $4,200 the most-pay figure. Angi's 2026 average from 760 verified projects is $4,236 with most spending $2,723–$5,881, Modernize prices the job at $2,600–$5,800 with a $4,000 average, and Fixr prices a prefabricated below-ground installation at $2,500–$5,000 with a $3,500 average — the three sources agree on this page's band.
What size must an egress window be?
Building codes set the minimum: Angi cites an opening at least 20 inches wide and 24 inches high with a minimum net clear opening of 5.7 square feet, and a sill no more than 44 inches above the finished floor, opening without tools. A 24-by-36-inch window meets minimum code on Angi's size table at $2,500–$4,000; larger openings cost more but add light and headroom.
Why does a below-ground egress window cost so much more than a normal window?
Because the window is the cheap part: Bob Vila prices cutting through a wall or excavating at about $1,500–$3,000 per window and Modernize prices excavation alone at $1,500–$3,000, before the well ($200–$2,500 by material on Angi) and drainage ($500–$2,000). An above-grade window skips all of that, which is why Fixr's above-ground case starts at $900.
Do I need a permit for an egress window?
In most municipalities, yes: Angi prices permits at $100–$500 with inspection fees of $50–$300 on top, and warns that skipping permits risks penalties or costly rework. The inspection also verifies the opening size and sill height, which is the whole point of the code.
Should I repair or replace an existing egress window?
Angi prices repairs to egress windows and wells at $200–$1,000 against $2,500–$8,000 for a full replacement including a new window and well, and applies the 50% rule: if repair costs exceed half the replacement price, replace. Angi puts the return on investment at 50–75%, mainly where the window turns a basement into a legal bedroom.






