Home › Cost Guides › Automatic Gate Installation
Cost Guide

How Much Does an Automatic Gate Installation Cost? (2026)

By Ahsan ul Haq · Last updated: 11 November 2026 · Planning estimate — not a quote · How we estimate

Typical range
$2,380 – $8,000
Most homeowners pay around $4,000 · A full automated system for a standard 10–16 ft residential driveway — the gate itself, a new electric operator, access controls (keypad and remotes), electrical hookup and professional installation, on a flat site with power nearby. The most-pay figure $4,000 is Angi's published national average (September 2026), agreed by Fixr; HomeGuide's most-pay figure is higher at about $7,000 because its range weights premium and custom jobs — see the factors note. NOT the opener alone (adding an operator to an existing gate runs $400–$5,500, HomeGuide) and NOT a manual gate (Fixr puts a manual driveway gate at $700–$3,000 installed).
typical
$2,380$8,000
Low end = minor scope  ·  marker = typical middle  ·  high end = major scope. Add 10–20% contingency to any budget.
A modern luxury house seen through open gate pillars across a wide paved driveway

Automatic Gate Installation cost at a glance

  • Typical range: $2,380 – $8,000
  • Most homeowners pay: around $4,000

Cross-checked against four published sources for this project. Sources used for this page: Angi, 'How Much Does Automatic Gate Installation Cost? [2026 Data]', updated Sep 17, 2026 — typical $2,380–$8,000, national average $4,000; gate widths installed 10 ft $500–$3,000, 12 ft $1,000–$4,000, 14 ft $1,200–$5,000, 16 ft $1,500–$6,000; swing $1,000–$6,000 installed, sliding $1,500–$5,000; cantilever $6,000–$10,000, vertical lift $3,000–$12,000, bi-fold $4,000–$15,000; labour $50–$150 an hour; permits $50–$300; running cost $30–$100 a year; maintenance $150–$400 a year; install 1–2 days. HomeGuide, 'How Much Does an Automatic Driveway Gate Cost? (2026)', published Dec 14, 2023 — installed $1,600–$13,000, most people spend about $7,000 (gate + opener + installation); gate unit $500–$5,000; operator $300–$5,000+; labour $800–$3,000+, $50–$100 an hour; keypad $100–$800; intercom $500–$4,500+ before installation; camera $500–$2,000; sensors $150–$1,500+; remotes $75–$300 each; battery power +$200–$600; hardwiring or solar +$400–$2,000+; permits $100–$300; running cost $1–$5 a month ($12–$60 a year); gate lifespan 10–15 years; install 1–2 days; automating an existing gate $400–$5,500 materials + professional installation; DIY automated gate + opener kit $2,800–$3,500. Fixr, 'Driveway Gate Prices', updated Jan 31, 2025 — automatic driveway gate $2,500–$5,000 installed; broad range $1,000–$6,000; national average $4,000; high end $12,000 (custom automatic 16 ft x 8 ft aluminium swinging gate with keypad and intercom); swinging $2,500–$8,500 installed, sliding $1,800–$7,650 installed; materials, gate + automation excluding installation: chain link $730–$5,500, vinyl $750–$5,600, wood $850–$8,500, steel $1,150–$8,500, wrought iron $1,150–$8,600, composite $1,200–$9,000, aluminium $2,350–$8,600; intercom $1,000–$7,000 installed; camera $125–$2,000 per unit; exit probe $250–$350; installation portion $750–$2,500 of a $4,000 average; manual driveway gate $700–$3,000 installed; gate lifespan 20+ years, automation components 10–15 years. ThePricer, 'How Much Do Electric Gates Cost?', updated Oct 7, 2026 (corroborating aggregator, not a fourth independent source) — typical residential automatic driveway gate $2,500–$8,000 installed, mid-range complete project $4,000–$7,000. Breakdown shares are derived from the worked example below. Checked November 2026.. Sources last checked: October 2026 — HomeGuide, Fixr, Angi, ThePricer. How we calculate these costs

Cost by scope

Automatic Gate Installation cost ranges by scope — chart of the table below
ScopeTypical costWhat it includes
Budget — single swing, 10–12 ft, basic steel/vinyl$2,500 – $4,000A single-swing gate, 10–12 ft, in chain link, vinyl or basic steel, with one standard operator, remote controls only (no keypad or intercom), basic safety sensors, on a flat site with power already nearby. Anchors: Fixr's automatic low end $2,500; ThePricer's 'basic new automatic gate' $2,500–$4,000.
Standard — 12 ft single-swing steel, mid-duty operator$4,000 – $7,000The most-pay tier — the worked example below: a 12 ft single-swing steel gate with a mid-duty operator, keypad plus remotes, photo-eye and edge safety sensors, a dedicated electrical circuit and a permit. The most common complete residential install.
Premium — wrought iron/custom, full security$7,000 – $13,000+A custom or wrought-iron gate, 14–18 ft or RV width, with a heavy-duty or dual operator, video intercom, keypad and smart/app control, cameras and extra sensors, solar or battery backup, a cantilever or bi-fold mechanism, and a longer electrical run or trenching. Anchors: HomeGuide's top end $13,000; Fixr's $12,000 custom job with keypad and intercom; Angi's bi-fold up to $15,000.

Where the money goes

Part of the jobShareNote
Gate unit — 12 ft single-swing steel33% of total$1,300 for the gate unit — a 12 ft single-swing steel gate, inside HomeGuide's $500–$5,000 gate-unit band and Angi's 12 ft installed band of $1,000–$4,000. Share derived from the worked example below.
Operator — mid-duty electric opener25% of total$1,000 for the operator — a mid-duty electric gate operator, inside the $300–$5,000+ operator band (HomeGuide; Angi). Share derived from the worked example below.
Labour — install, 1–2 days22% of total$900 for installation labour — inside the $800–$3,000+ labour band (HomeGuide) and Fixr's $750–$2,500 installation portion. Share derived from the worked example below.
Access controls — keypad + remote8% of total$300 for access controls — a keypad at $200 (inside the $100–$800 band) plus one remote at $100 (inside the $75–$300 band). Share derived from the worked example below.
Electrical — dedicated circuit10% of total$400 for electrical work — a dedicated circuit from the house, at the floor of HomeGuide's $400–$2,000+ hardwiring band. No source publishes a standalone electrician line item — see the factors note. Share derived from the worked example below.
Permits2% of total$100 for permits — at the floor of HomeGuide's $100–$300 band and inside Angi's $50–$300 band. Share derived from the worked example below.
Gate unit — 12 ft single-swing steel · 33%Operator — mid-duty electric opener · 25%Labour — install, 1–2 days · 22%Access controls — keypad + remote · 8%Electrical — dedicated circuit · 10%Permits · 2%
Estimator’s note: on an automatic gate installation, gate unit — 12 ft single-swing steel is usually where quotes swing most (33% of total of a typical budget). Ask every contractor to itemize that line in writing — totals are only comparable when that part is.
A wall-mounted access-control keypad and card reader — keypads run $100–$800; the worked example below budgets $300 for a keypad plus one remote.
A wall-mounted access-control keypad and card reader — keypads run $100–$800; the worked example below budgets $300 for a keypad plus one remote.

What moves the price most

Worked example — $4,000 most-pay install (standard 12 ft single-swing steel gate, mid-duty operator, keypad + remotes, dedicated circuit, permit): gate unit $1,300 (33%) + operator $1,000 (25%) + labour $900 (22%) + access controls $300 (8%) + electrical $400 (10%) + permits $100 (2%) = $4,000. Every line sits inside a published band. The shares are whole-percent roundings of this example — no source publishes a component percentage split; HomeGuide's own component midpoints imply roughly 39% gate / 38% operator / 27% labour of a $7,000 job, and those three shares sum above 100% because each is a midpoint of an independent range. Footings, posts and concrete are bundled inside the labour line in all three sources — no source prices them separately, and masonry columns are quoted separately with no published figure. Where sources disagree: the most-pay figure — Angi $4,000 and Fixr $4,000 vs HomeGuide about $7,000, because HomeGuide's total spans to $13,000 and weights premium/custom jobs; the page leads with $4,000 and names $7,000 as the premium-weighted figure; the top of the typical range — Fixr caps a standard automatic gate at $5,000 installed while Angi runs to $8,000 and HomeGuide to $13,000, because Fixr's band is standard-spec and HomeGuide's includes custom/premium jobs; swing vs sliding — Angi: swing $1,000–$6,000, sliding $1,500–$5,000, while Fixr: swinging $2,500–$8,500 installed, sliding $1,800–$7,650 installed, and calls sliding usually the more affordable option; there is no universal rule — driveway layout (slope, swing arc vs slide run) decides; intercom — HomeGuide $500–$4,500+ before installation vs Fixr $1,000–$7,000 installed, published here as $500–$7,000 with the top end being installed multi-station systems; permits — Angi $50–$300 vs HomeGuide $100–$300, published as $50–$300; running electricity — Angi $30–$100 a year vs HomeGuide $1–$5 a month ($12–$60 a year), published as $12–$100 a year; lifespan — HomeGuide says most automatic gates last 10–15 years, Fixr says the gate can last 20+ years with the operator/electronics lasting 10–15 years, published as gate 20+ years, operator 10–15 years. HomeGuide's page is dated December 2023 while Angi is September 2026 and Fixr January 2025 — HomeGuide's figures are the oldest and the widest, and Angi 2026 is the freshest anchor for the headline range. Methodology: the typical range $2,380–$8,000 and most-pay $4,000 are Angi's published 2026 figures, corroborated by Fixr's $4,000 average; the honest overlap all three sources agree on is $2,500–$5,000. No per-linear-foot gate price is published anywhere — gates are priced per gate by width, type and material — so none is given. Related costs: gate opener installation, driveway gate installation, fence gate installation, fence installation and concrete driveway.

Work out your quantities: before you compare quotes, run your measurements through our free remodeling calculators (paint, tile, concrete and flooring) — each one shows its formula and runs entirely in your browser.

Costs in your city

Labor is the biggest variable in any remodel, and labor is local — the same bathroom can price very differently in Houston than in Boston. We are adding city editions metro by metro, each with its own labor index, permit notes and climate factors, written for that city rather than copied from this page. Wave 1: Houston, Dallas–Fort Worth, Phoenix, Atlanta, Miami–South Florida, Orlando, Tampa, Charlotte, Austin and San Antonio. Until your city's page is live, use the national range here and weight it the way contractors do: Sun Belt labor often prices near or below the national middle, while coastal California and the Northeast metros often price well above it.

How this estimate was built: the range on this page is a synthesis of at least three published industry sources (national cost guides and the Remodeling Magazine Cost vs. Value data among them), cross-checked in October 2026. We publish planning ranges, never a single pretend-precise price. Full method: How We Estimate Costs.
An ornate wrought-iron double gate in winter — wrought iron is the premium material, $1,150–$8,600 for gate plus automation (Fixr), and premium installs reach $7,000–$13,000.
An ornate wrought-iron double gate in winter — wrought iron is the premium material, $1,150–$8,600 for gate plus automation (Fixr), and premium installs reach $7,000–$13,000.

Frequently asked questions

How much does it cost to install an automatic driveway gate?

Typically $2,380–$8,000 for a standard residential system, averaging about $4,000 (Angi, September 2026). HomeGuide's broader range runs $1,600–$13,000 with most people spending about $7,000; Fixr puts a standard automatic gate at $2,500–$5,000. The honest overlap all three sources agree on is $2,500–$5,000.

Is it cheaper to automate the gate I already have?

Yes — automating an existing gate costs $400–$5,500 for materials and professional installation (HomeGuide), versus $2,380–$8,000+ for a full new system (Angi). The opener hardware alone is $300–$5,000+ (HomeGuide).

Is a swing gate or a sliding gate cheaper?

Neither is always cheaper — the published ranges overlap heavily. Angi: swing $1,000–$6,000, sliding $1,500–$5,000. Fixr: swinging $2,500–$8,500 installed, sliding $1,800–$7,650 installed, and calls sliding usually the more affordable option. Choose by driveway layout: a swing gate needs a clear arc; a sliding gate needs a clear run beside the opening and suits slopes.

Do I need a permit for an automatic gate?

In most municipalities, yes — especially when electrical work or structural changes are involved (Angi). Permit fees run $50–$300 (Angi) or $100–$300 (HomeGuide). Contractors usually handle permitting; confirm who is responsible before work starts, and check HOA rules too (Fixr).

How long does installation take, and how long does the gate last?

Installation takes 1–2 days in most cases (HomeGuide); automating an existing gate or fitting a small simple gate can take a few hours. The gate itself can last 20+ years with maintenance; the operator and electronics last 10–15 years before replacement or upgrade (Fixr; HomeGuide says 10–15 years for the gate system as a whole).

What happens to my gate in a power cut?

All automatic gates should have a manual release so you can operate them during an outage and emergency responders can get in (HomeGuide; Fixr). Many systems also offer battery backup — HomeGuide puts battery power at +$200–$600. Test the manual release after installation.

Before you sign: get at least 3 written local quotes for the same written scope, confirm permits and who pulls them, and keep a 10–20% contingency separate from the contract price.

Ahsan ul Haq — Editor, Remodel Cost Hub

Ahsan compiles and edits the cost guides on Remodel Cost Hub, cross-checking every range against at least three published sources before it is published — the full method is on our Methodology page. Spot an error on this page? Send a correction.

Automatic Gate Installation cost range graphic
Save this range for later: Pin it on Pinterest

Related cost guides

A tall pyramid flame-tower patio heater with visible flames at night

Patio Heater Installation Cost

$300 – $850

$532 is the pin: Homewyse's installed electric patio heater figure (May 2026) — the top of its $437–$532 electric band. Most homeowners pay $437–$846 for a single installed heater, the span of Homewyse's electric ($437–$532) and gas ($692–$846) per-heater bands. A plumbed gas tower typically runs $692–$846 before any gas-line run ($20–$75/ft extra, Builds and Buys). Porch's older averages run lower (electric $303–$369, gas $487–$600). A patio heater heats people on an open patio — never a garage heater, fire pit, outdoor fireplace or pool heater (see the distinctions in the factors note).

A suburban house with a herringbone red-brick driveway in front

Brick Driveway Installation Cost

$5,500 – $14,500

$10,000 is the pin: the derived midpoint of HomeGuide's published $5,500–$14,500 total for a standard 24'x24' (576 sq ft) 2-car clay-brick driveway, materials + installation — NOT a published national average; no source publishes a brick-specific average (Angi's $12,000 average covers paver driveways of ALL materials; its $3,400 interlocking-paver average covers all paver projects including small patios). Clay brick runs $10–$25 per sq ft installed (HomeGuide); the four sources' brick bands overlap at $12–$20. This page is clay brick ONLY — the companion to the all-materials paver-driveway page; concrete pavers run $2–$5 less per sq ft.

A garden waterfall cascading over rocks into a pond beside a brick house

Backyard Waterfall Installation Cost

$5,000 – $10,000

$7,500 is the pin: the derived midpoint of the $5,000–$10,000 overlap band for a typical mid-size pro-installed backyard waterfall — NOT a published national average; no source publishes a waterfall-only average (Angi's $2,730 and Fixr's $8,000 are fountain-category averages and are not used here). The band is the honest overlap of HomeGuide's standalone waterfall $4,500–$13,600 installed, Midwest's Chicago pondless $5,000–$18,000, Angi's custom water feature $5,000–$10,000+ and Grass Roots' basic package from $6,000. A pondless (disappearing) waterfall recirculates water through a rock cascade into a buried reservoir — no open standing water.

Solar panels across the red-tiled roofs of modern homes in bright sunshine

Solar Roof Installation Cost

$27,600 – $50,000

$38,800 is a derived most-pay figure — the midpoint of the $27,600–$50,000 overlap of Angi's ($21,000–$50,000) and Fixr's ($27,600–$60,000) most-pay bands; their published averages disagree (Angi $35,000 vs Fixr $46,000), so no single published average is printed. At $21–$25 per sq ft of coverage ($23 average, Angi and Fixr agree), full 2,000-sq-ft coverage is $42,000–$50,000 in both sources. The federal tax credit is $0 for 2026 installs — the 30% residential credit ended December 31, 2025 — so every figure here is gross installed cost, never net of a credit.

An alpine house with yellow balconies and black railings

Balcony Installation Cost

$8,000 – $25,000

$14,000 is Angi's published national average (updated Oct 1, 2026) — NOT a derived midpoint. A medium 40–80 sq ft balcony is $8,000–$17,000, and the 100–150 sq ft spec on this page lands in Angi's large-size band at $15,000–$30,000+. At $30–$90 per sq ft (Angi, all-in), the per-sq-ft and total bands do not reconcile at small sizes — never derive a total from the per-sq-ft rate.

A cobblestone drive leading to a stone house under autumn trees

Cobblestone Driveway Installation Cost

$8,600 – $24,800

$16,700 is Angi's published national average (updated Oct 19, 2026) — NOT a derived midpoint — for a standard 480 sq ft (20'x24') 2-car driveway of real cobblestone. At $18–$50 per sq ft (Angi, all-in), the honest overlap across all three sources is $27–$37 per sq ft. Totals on this page come from Angi's published size table, not from multiplying the per-sq-ft rate.