Home › Cost Guides › Wood Fence Installation
Cost Guide

How Much Does a Wood Fence Installation Cost? (2026)

By Ahsan ul Haq · Last updated: 11 November 2026 · Planning estimate — not a quote · How we estimate

Typical range
$3,750 – $5,500
Most homeowners pay around $4,500 · Wood fence installation typically costs $3,750 – $5,500 for 150 linear feet of 6-foot wood privacy fence, at about $25–$37 per linear foot installed, with about $4,500 the figure most jobs land near — HomeGuide prices a 6-foot wood privacy fence at $25–$50 per linear foot, Fixr prices a wood privacy fence at $17–$37 installed with an average job of $4,500, and Angi averages $3,312 across all wood fence styles with most at $1,919–$4,948. A picket or split-rail fence lands below the band, and cedar or redwood with gates and stain runs above it, while the lumber, posts, labor, gates and finish below are all inside the total.
typical
$3,750$5,500
Low end = minor scope  ·  marker = typical middle  ·  high end = major scope. Add 10–20% contingency to any budget.
Tall vertical-board wooden fence with pointed tops

Wood Fence Installation cost at a glance

  • Typical range: $3,750 – $5,500
  • Most homeowners pay: around $4,500
  • Prices vary most by: Installation labor (40–55% of the budget)

Cross-checked against three published sources for this project. Sources used for this page: Angi's wood fence installation cost guide, updated August 3, 2026 (national average $3,312, most $1,919–$4,948, full range $800–$8,000+; $10–$30 per linear foot; privacy $27–$60; common woods' material $2–$8, tropical/composite $8–$15 per linear foot; lumber $1–$15 per linear foot), HomeGuide's wood fence cost guide (average $4,000–$10,000; $20–$50 per linear foot installed; materials $10–$30, labor $5–$20 per linear foot; 6-foot privacy $25–$50, 8-foot $50–$75; picket $20–$40, split-rail $15–$35; cedar privacy $35–$40, pine privacy $20–$45, redwood privacy $35–$50) and Fixr's wood fence cost guide (average $4,500 for a 209-linear-foot cedar dog-ear fence with a gate, range $3,500–$6,500; materials $5–$15, labor $10–$20, installed $15–$35 per linear foot; privacy materials $7–$17, installed $17–$37; picket installed $10–$18, split-rail $8–$16, shadowbox $17–$35). Sources last checked: October 2026 — HomeGuide, Fixr, Angi. How we calculate these costs

Cost by scope

Wood Fence Installation cost ranges by scope — chart of the table below
ScopeTypical costWhat it includes
Budget picket or split-rail — the low end$1,500 – $3,000The cheap end: Fixr prices a wooden picket fence at $10–$18 per linear foot installed and split-rail at $8–$16 — open styles use far less lumber than a privacy fence
Standard pine or cedar privacy — the typical job$3,750 – $5,500The shared band itself: HomeGuide prices 6-foot wood privacy at $25–$50 per linear foot and Fixr at $17–$37, overlapping at $25–$37 — 150 feet of 6-foot privacy fence is where most backyard jobs land
Premium cedar, redwood or tropical — the top end$5,500 – $9,000The expensive end: HomeGuide prices cedar privacy at $35–$40 and redwood at $35–$50 per linear foot, and an 8-foot privacy fence at $50–$75 — premium lumber, taller boards, gates and a stain finish push a job here

Where the money goes

Part of the jobShareNote
Lumber, posts and concrete35–50% of totalThe boards: HomeGuide prices wood fence materials at $10–$30 per linear foot and Fixr at $5–$15 — pine is cheapest, cedar and redwood sit higher, and posts set in concrete are inside this line
Installation labor40–55% of totalThe building: HomeGuide prices labor at $5–$20 per linear foot and Fixr at $10–$20 — setting posts plumb, hanging rails and boards, and cutting around slopes and gates
Gates, stain and permits10–20% of totalThe rest: a walk gate, a stain or seal coat on new lumber, and the permit — the finish is what keeps a wood fence from weathering grey, and it is priced here rather than in the lumber line
Lumber, posts and concrete · 35–50%Installation labor · 40–55%Gates, stain and permits · 10–20%
Estimator’s note: on a wood fence installation, installation labor is usually where quotes swing most (40–55% of total of a typical budget). Ask every contractor to itemize that line in writing — totals are only comparable when that part is.
A horizontal-board wooden fence under ivy: wood needs regular sealing or staining to hold its colour — and that finish is priced in this page's extras line
A horizontal-board wooden fence under ivy: wood needs regular sealing or staining to hold its colour — and that finish is priced in this page's extras line

What moves the price most

Style is the first driver: HomeGuide prices a 6-foot privacy fence at $25–$50 per linear foot against a picket fence at $20–$40 and a split-rail fence at $15–$35 — privacy uses the most lumber because there are no gaps. Species is second: Angi prices common woods' material at $2–$8 per linear foot, while HomeGuide prices cedar privacy at $35–$40 and redwood privacy at $35–$50 installed, against pine privacy at $20–$45 — cedar and redwood cost more and resist rot better. Height is third: HomeGuide prices 6-foot privacy at $25–$50 and 8-foot privacy at $50–$75 per linear foot, so going taller is roughly a second price jump, not a small one. Finally, length, slope and finish close the bill: the per-foot rate times 150 feet is the run, a slope or rocky ground adds labor, and a stain coat plus gates are priced on top.

Work out your quantities: before you compare quotes, run your measurements through our free remodeling calculators (paint, tile, concrete and flooring) — each one shows its formula and runs entirely in your browser.

Costs in your city

Labor is the biggest variable in any remodel, and labor is local — the same bathroom can price very differently in Houston than in Boston. We are adding city editions metro by metro, each with its own labor index, permit notes and climate factors, written for that city rather than copied from this page. Wave 1: Houston, Dallas–Fort Worth, Phoenix, Atlanta, Miami–South Florida, Orlando, Tampa, Charlotte, Austin and San Antonio. Until your city's page is live, use the national range here and weight it the way contractors do: Sun Belt labor often prices near or below the national middle, while coastal California and the Northeast metros often price well above it.

How this estimate was built: the range on this page is a synthesis of at least three published industry sources (national cost guides and the Remodeling Magazine Cost vs. Value data among them), cross-checked in October 2026. We publish planning ranges, never a single pretend-precise price. Full method: How We Estimate Costs.
Weathered picket tops in close view: untreated wood greys and weathers — the stain and seal coat in this page's breakdown is what slows that down
Weathered picket tops in close view: untreated wood greys and weathers — the stain and seal coat in this page's breakdown is what slows that down

Frequently asked questions

How much does a wood privacy fence cost?

About $3,750–$5,500 for 150 linear feet of 6-foot wood privacy fence, with about $4,500 the common middle. HomeGuide prices 6-foot wood privacy at $25–$50 per linear foot, Fixr at $17–$37, and Fixr's average wood fence job is $4,500.

Pine or cedar — which wood fence is better value?

Pine is the budget wood: Angi prices common woods' material at $2–$8 per linear foot, and HomeGuide prices pine privacy at $20–$45 installed. Cedar costs more — HomeGuide prices cedar privacy at $35–$40 — and Fixr notes cedar is rarer, more resistant and more attractive than pressure-treated pine, so it is the usual mid-range step up.

Does a wood fence need staining?

Yes, on a schedule: HomeGuide notes wood fencing requires regular maintenance like sealing, staining or painting to keep it looking its best. Untreated boards grey and weather, and the stain or seal coat is the line in this page's breakdown that slows that down.

How much cheaper is a picket fence than a privacy fence?

Meaningfully cheaper, because it uses less lumber: Fixr prices a wooden picket fence at $10–$18 per linear foot installed against $17–$37 for privacy, and HomeGuide prices picket at $20–$40 against $25–$50 for 6-foot privacy. On 150 feet that is roughly a $1,500–$3,000 picket job against this page's $3,750–$5,500 privacy band.

How do I compare two wood fence quotes?

Line up the same written scope before comparing totals: species and board style, height, post spacing and whether posts are set in concrete, the number and width of gates, and whether stain or seal is included. Two quotes for a 150-foot fence can differ by thousands while describing genuinely different fences — a pine picket quote and a cedar privacy quote are not the same job, even at the same length.

Before you sign: get at least 3 written local quotes for the same written scope, confirm permits and who pulls them, and keep a 10–20% contingency separate from the contract price.

Ahsan ul Haq — Editor, Remodel Cost Hub

Ahsan compiles and edits the cost guides on Remodel Cost Hub, cross-checking every range against at least three published sources before it is published — the full method is on our Methodology page. Spot an error on this page? Send a correction.

Wood Fence Installation cost range graphic
Save this range for later: Pin it on Pinterest

Related cost guides

Ornate black metal double gate with scrollwork

Wrought Iron Fence Installation Cost

$5,000 – $8,500

Wrought iron fence installation typically costs $5,000 – $8,500 for about 100 linear feet of 4-foot fence, installed, with about $6,750 the figure most jobs land near — HomeGuide prices wrought iron at $50–$85 per linear foot installed for 4–6-foot heights and puts a 100-foot run at $5,000–$8,500, while Angi, updated September 11, 2026, averages $3,169 across 1,659 verified projects with most paying $1,421–$5,138 and prices materials for a typical 4-foot fence at $25–$35 per linear foot; and Fixr averages $22–$40 per linear foot installed. Angi's length table is material-led and HomeGuide's band is full installed — the gap is published here as a scope split, not averaged away — and this page's typical band follows HomeGuide's installed scope, with $6,750 the midpoint of that 100-foot band rather than a guide-stated average. The iron panels, posts, labor, gates and columns below are all inside the total for a standard installed run, while automated gates — Angi prices them from $600 for a small manual gate to over $8,500 for an automated driveway gate — and brick columns at $450–$1,275 each are tiered and published separately.

Green powder-coated metal fence panel with a post

Aluminum Fence Installation Cost

$3,750 – $6,800

Aluminum fence installation typically costs $3,750 – $6,800 for about 150 linear feet of standard 4-foot picket fencing, with about $4,600 the figure most jobs land near — Angi, updated September 23, 2026, puts the national average at $4,607 with most homeowners paying $2,426–$6,791 and prices a complete project at $22–$72 per linear foot, while HomeGuide prices a 150-foot picket, pool or ornamental run at $3,750–$11,250 at $25–$75 per linear foot and EngineerFix prices a professionally installed black aluminum fence at $22–$72 per linear foot turnkey. The guides agree on the per-foot band; where they differ is scope — Angi's length table runs to 300 feet and HomeGuide's privacy tier runs to $130 per foot — so this page's typical band follows the standard picket overlap for 150 feet, with split-rail, ornamental and privacy tiers published separately.

Two-story gray house at dusk with a wide concrete driveway and three garage doors

Concrete Driveway Cost

$3,500 – $8,600

Typical 2-car driveway of about 576 sq ft in plain concrete, installed — about $6 – $15 per sq ft installed

Car parked in a snowy driveway beside a white house in winter

Heated Driveway Installation Cost

$7,500 – $15,000

A heated driveway installation typically costs $7,500 – $15,000 for a standard two-car driveway of about 600 sq ft, with about $13,000 the figure most standard jobs land near — Angi prices heated driveway installation at $12–$25 per sq ft with an average near $13,000, HomeGuide prices a heated concrete or asphalt driveway at $12–$28 per sq ft with a $14,600 national average and a $6,900–$22,400 average range, and HouseDigest puts the same work at $12–$28 per sq ft with a two-car driveway reaching about $16,000. The $7,500–$15,000 typical band is the $12–$25 per sq ft overlap applied to about 600 sq ft, and $13,000 is Angi's average — a mat-only job can come in far below it, and a hydronic system under pavers costs far more, while the heating system, surface, labor and controls below are all inside the total.

Single-story beige stucco house with a freshly painted exterior, neat lawn and concrete walkway

Exterior House Painting Cost

$3,000 – $7,500

Typical full exterior of an average home, washed, prepped and painted — about $1.50 – $4 per sq ft of paintable surface

Suburban house at sunset with a single and a double garage door

Garage Door Replacement Cost

$800 – $1,800

Typical replacement of one standard door, installed, with new tracks, springs and hardware