Home › Cost Guides › Water Well Drilling
Cost Guide

How Much Does Water Well Drilling Cost? (2026)

By Ahsan ul Haq · Last updated: 11 November 2026 · Planning estimate — not a quote · How we estimate

Typical range
$5,500 – $10,500
Most homeowners pay around $7,500 · A complete residential well about 150–200 feet deep — drilling, casing, pump, pressure tank and permits together
typical
$5,500$10,500
Low end = minor scope  ·  marker = typical middle  ·  high end = major scope. Add 10–20% contingency to any budget.
Tall white water-well drilling rig with its drill pipe in the ground, dust rising, two workers in ear protection watching

Water Well Drilling cost at a glance

  • Typical range: $5,500 – $10,500
  • Most homeowners pay: around $7,500
  • Prices vary most by: Drilling (50–65% of the budget)

Cross-checked against three published sources for this project. Sources used for this page: Angi's well drilling cost guide, updated September 18, 2026 (national average $5,500, most $3,000–$9,000; residential wells $25–$65 per foot; most residential wells 50–200 feet deep with a 4- to 8-inch casing; PVC casing $6–$10 per foot, steel $30–$130+ per foot; pump $900–$2,500; permits $200–$500; water testing $50–$600; rocky, sloped or remote terrain $50–$75 per foot; DIY about $2,500 against $5,500 professional for a 150-foot well), HomeGuide's well drilling cost guide (2026) (complete installation $30–$80+ per foot; $6,000–$16,000 average for a 200-foot well; national average $10,500; drilling alone $20–$30 per foot; most residential wells 100–300 feet deep; pump $400–$2,500; pressure tank $800–$1,500; residential $30–$80+ per foot, $3,000–$24,000+; irrigation $30–$100+ per foot) and This Old House's well installation cost guide (average $3,500–$15,000 complete; drilling $25–$65 per foot; residential $25–$65 per foot, $3,750–$15,300; artesian $25–$85 per foot, $5,000–$15,000; drilling by method $15–$100 per foot). DrillerDB's 2026 contractor guide corroborates the complete-system figures (about $7,500 at the typical 150-foot depth; 50–100 ft $3,500–$6,500; 300 ft $10,000–$18,000). Synthesized typical = the complete-well overlap at $5,500–$10,500, with $7,500 most-pay where Angi's drilling average plus pump and tank meets HomeGuide's complete-install band and DrillerDB's $7,500 system average. Checked November 2026.. Sources last checked: October 2026 — This Old House, HomeGuide, Angi. How we calculate these costs

Cost by scope

Water Well Drilling cost ranges by scope — chart of the table below
ScopeTypical costWhat it includes
Budget — shallow well, soft ground, 50–100 ft$3,000 – $6,500DrillerDB prices a complete 50–100-foot system at $3,500–$6,500 in soft sediment, and Angi prices residential drilling at $25–$65 per foot — at $30 a foot the drilling alone on a 100-foot well is $3,000.
Standard — 150–200 ft residential well, complete$5,500 – $10,500Angi's national average is $5,500 for the drilling, HomeGuide averages $10,500 for a complete 200-foot install, and This Old House averages $3,500–$15,000 complete — the overlap is the standard job on this page.
Premium — deep or hard-rock well, 300+ ft$10,000 – $24,000+HomeGuide prices residential wells to $24,000+ and DrillerDB prices a 300-foot complete well at $10,000–$18,000; hard rock runs $55–$85 per foot in the published per-foot tables, against $25–$40 in soft soil.

Where the money goes

Part of the jobShareNote
Drilling50–65% of totalAngi prices residential drilling at $25–$65 per foot and HomeGuide at $20–$30 per foot for the drilling alone — 150 feet at $30 a foot is $4,500
Casing10–15% of totalAngi prices PVC casing at $6–$10 per foot and steel casing at $30–$130+ per foot depending on diameter; most residential wells use a 4- to 8-inch casing
Pump & pressure tank20–30% of totalAngi prices pumps at $900–$2,500 and HomeGuide at $400–$2,500, with pressure tanks at $800–$1,500 in HomeGuide's data
Permits, testing & electrical5–10% of totalAngi prices permits at $200–$500 and water testing at $50–$600; the electrical connection from the pump to the house is the rest of this share
Drilling · 50–65%Casing · 10–15%Pump & pressure tank · 20–30%Permits, testing & electrical · 5–10%
Estimator’s note: on water well drilling, drilling is usually where quotes swing most (50–65% of total of a typical budget). Ask every contractor to itemize that line in writing — totals are only comparable when that part is.
A drilling rig working at night under lights: Angi prices residential drilling at $25–$65 per foot, and depth is the first thing that sets the bill
A drilling rig working at night under lights: Angi prices residential drilling at $25–$65 per foot, and depth is the first thing that sets the bill

What moves the price most

Depth is the first lever: Angi prices most residential wells at 50–200 feet deep and HomeGuide at 100–300 feet, with drilling at $25–$65 per foot in Angi's data — every extra 50 feet at $30 a foot adds $1,500 before anything else. Ground is second: Angi prices rocky, sloped or remote terrain at $50–$75 per foot against the standard $25–$65, and the published per-foot tables price soft soil at $25–$40, sedimentary rock at $35–$55 and hard rock at $55–$85. Casing is third: Angi prices PVC casing at $6–$10 per foot against $30–$130+ for steel, so the casing choice alone can move the bill by thousands on a deep well. What counts as complete is fourth: HomeGuide prices the complete install — drilling, casing, pump, electrical and permits — at $30–$80+ per foot, while Angi's $5,500 average is the drilling; always ask whether the pump and tank are in the quote. Worked example at the most-pay figure: drilling 150 ft × $30 = $4,500 + casing $900 + pump $1,100 + pressure tank $800 + permits $200 = $7,500. For the pump on its own, see our well pump replacement guide and our main water line replacement guide, and for the septic side of a rural lot see our septic system installation guide.

Work out your quantities: before you compare quotes, run your measurements through our free remodeling calculators (paint, tile, concrete and flooring) — each one shows its formula and runs entirely in your browser.

Costs in your city

Labor is the biggest variable in any remodel, and labor is local — the same bathroom can price very differently in Houston than in Boston. We are adding city editions metro by metro, each with its own labor index, permit notes and climate factors, written for that city rather than copied from this page. Wave 1: Houston, Dallas–Fort Worth, Phoenix, Atlanta, Miami–South Florida, Orlando, Tampa, Charlotte, Austin and San Antonio. Until your city's page is live, use the national range here and weight it the way contractors do: Sun Belt labor often prices near or below the national middle, while coastal California and the Northeast metros often price well above it.

How this estimate was built: the range on this page is a synthesis of at least three published industry sources (national cost guides and the Remodeling Magazine Cost vs. Value data among them), cross-checked in October 2026. We publish planning ranges, never a single pretend-precise price. Full method: How We Estimate Costs.
A traditional hand pump in a field — not a modern drilled-well pump, but the low-tech end of the same job: getting groundwater to the surface. A drilled well's pump alone runs $400–$2,500 in HomeGuide's data
A traditional hand pump in a field — not a modern drilled-well pump, but the low-tech end of the same job: getting groundwater to the surface. A drilled well's pump alone runs $400–$2,500 in HomeGuide's data

Frequently asked questions

How much does it cost to drill a water well?

Typically $5,500–$10,500 for a complete residential well, with $7,500 the most-pay figure — Angi averages $5,500 for the drilling and HomeGuide $10,500 for a complete 200-foot install.

How much is well drilling per foot?

$25–$65 per foot for residential wells in Angi's data, and $30–$80+ per foot for a complete install in HomeGuide's — rocky or remote ground pushes toward $50–$75 a foot in Angi's data.

How deep is a typical residential well?

Most residential wells run 50–200 feet deep in Angi's data and 100–300 feet in HomeGuide's, with a 4- to 8-inch casing pipe.

What is included in a complete well?

Drilling, casing, pump, pressure tank, electrical connections and permits — HomeGuide prices the complete install at $30–$80+ per foot, and the pump and tank are not always in a per-foot quote.

How much does a well pump cost?

$400–$2,500 in HomeGuide's data and $900–$2,500 in Angi's. See our well pump replacement guide for the pump on its own.

Before you sign: get at least 3 written local quotes for the same written scope, confirm permits and who pulls them, and keep a 10–20% contingency separate from the contract price.

Ahsan ul Haq — Editor, Remodel Cost Hub

Ahsan compiles and edits the cost guides on Remodel Cost Hub, cross-checking every range against at least three published sources before it is published — the full method is on our Methodology page. Spot an error on this page? Send a correction.

Water Well Drilling cost range graphic
Save this range for later: Pin it on Pinterest

Related cost guides