Toilet Repair cost at a glance
- Typical range: $150 – $400
- Most homeowners pay: around $275
Cross-checked against three published sources for this project. Sources used for this page: Angi's toilet repair cost guide (updated July 2026), Thumbtack's toilet repair cost data and Home Depot's pro-referral toilet repair FAQ. Sources last checked: October 2026 — Angi, Thumbtack, Home Depot. How we calculate these costs
Cost by scope

| Scope | Typical cost | What it includes |
|---|---|---|
| Simple fix — seat, handle, small parts | $50 – $150 | The cheapest real repairs: a seat at $50–$70, a handle at $50–$80 and a tank at $50–$100 in parts (Angi), or a loose toilet at $50–$200 — the jobs a handy homeowner often does without a plumber |
| Standard repair — the typical band | $150 – $400 | The published typical band itself: a fill or flush valve at $50–$150 in parts, a wax ring at $50–$200, a running toilet at $100–$400 or a slow-filling toilet at $60–$200 (Angi) — the jobs most households actually pay for |
| Major repair — flange, pipes, wall-hung | $350 – $700 | The expensive end: a flange at $145–$350, pipes at $70–$700, a leaky toilet at $100–$600 or a clogged toilet at $85–$600 (Angi), with wall-hung units at $50–$400 — and Thumbtack flags cracked bowls or tanks and in-wall pipe or valve work as the cases that cost most |
Where the money goes
| Part of the job | Share | Note |
|---|---|---|
| Fill / flush valve | $50 – $150 in parts | Angi's parts band for the valve that controls filling and flushing |
| Wax ring | $50 – $200 in parts | Angi's parts band for the seal between toilet and floor flange |
| Flange | $145 – $350 in parts | Angi's parts band for the floor flange itself |
| Tank | $50 – $100 in parts | Angi's parts band for a replacement tank |
| Bowl | $70 – $100 in parts | Angi's parts band for a replacement bowl |
| Seat | $50 – $70 in parts | Angi's parts band for a replacement seat |
| Handle | $50 – $80 in parts | Angi's parts band for a replacement handle |
| Siphon | $100 – $200 in parts | Angi's parts band for a replacement siphon |
| Pipes | $70 – $700 in parts | Angi's wide pipes band — a short visible run vs in-wall work |
| Labour | $85 – $250 | Home Depot's pro-referral labour band for a toilet repair visit |
| Materials (bowl, tank or whole toilet) | $100 – $400 | Home Depot's materials band when a part, not just a seal, is replaced |

What moves the price most
The problem is the biggest lever: Angi puts a running toilet at $100–$400, a leaky toilet at $100–$600, a clogged toilet at $85–$600, a loose toilet at $50–$200 and a slow-filling toilet at $60–$200. Toilet type comes next: one-piece $50–$200, two-piece $50–$250 and wall-hung $50–$400 (Angi), with wall-hung work pricier because the tank and carrier sit inside the wall. Part vs labour decides the rest — a $50 wax ring is cheap, a $350 flange is not, and labour at $85–$250 (Home Depot) is charged on top. Thumbtack's warning is the one to heed: a cracked bowl or tank, or pipe and valve work inside the wall, is what turns a routine repair into an expensive one.
Costs in your city
Labor is the biggest variable in any remodel, and labor is local — the same bathroom can price very differently in Houston than in Boston. We are adding city editions metro by metro, each with its own labor index, permit notes and climate factors, written for that city rather than copied from this page. Wave 1: Houston, Dallas–Fort Worth, Phoenix, Atlanta, Miami–South Florida, Orlando, Tampa, Charlotte, Austin and San Antonio. Until your city's page is live, use the national range here and weight it the way contractors do: Sun Belt labor often prices near or below the national middle, while coastal California and the Northeast metros often price well above it.

Frequently asked questions
How much does toilet repair cost?
Typically $150–$400, with about $275 the most-pay figure. Angi averages $271 and Thumbtack averages $160–$390, with a typical simple repair around $240 — the two published averages bracket this page's band.
How much does it cost to fix a running toilet?
A running toilet runs $100–$400 (Angi). The usual culprit is the fill or flush valve, at $50–$150 in parts, so most running-toilet jobs land in the lower half of the typical band.
How much does it cost to fix a toilet leaking at the base?
A leak at the base is usually the wax ring ($50–$200 in parts) or the flange underneath it ($145–$350 in parts), plus labour at $85–$250 (Home Depot) — so most base leaks land inside the $150–$400 typical band.
How much does it cost to fix a clogged toilet?
A clogged toilet runs $85–$600 (Angi). A simple clog cleared with a plunger or auger sits at the low end; a clog caused by a pipe problem, or one that needs the toilet pulled, sits at the high end.
When should I replace a toilet instead of repairing it?
When the porcelain itself is cracked, or the problem is pipe or valve work inside the wall — Thumbtack flags both as the expensive cases. Angi puts a full toilet replacement at $90–$1,500, so a repair approaching that range, or a second repair on the same old unit, usually means replacement wins.






