Home › Cost Guides › Split Rail Fence Installation
Cost Guide

How Much Does a Split Rail Fence Installation Cost? (2026)

By Ahsan ul Haq · Last updated: 11 November 2026 · Planning estimate — not a quote · How we estimate

Typical range
$3,000 – $5,500
Most homeowners pay around $3,500 · A split-rail fence, professionally installed — Angi's 2026 national average is $3,500 for a typical run, with most homeowners paying $2,250–$5,500 at $15.50–$39 per linear foot installed. The wood and the rail count set the price: pine is cheapest, black locust and vinyl cost most, and a fourth rail or wire mesh lifts the per-foot rate.
typical
$3,000$5,500
Low end = minor scope  ·  marker = typical middle  ·  high end = major scope. Add 10–20% contingency to any budget.
Zigzag split-rail fence rails in close view

Split Rail Fence Installation cost at a glance

  • Typical range: $3,000 – $5,500
  • Most homeowners pay: around $3,500

Cross-checked against four published sources for this project. Sources used for this page: Angi, 'How Much Does a Split Rail Fence Cost? [2026 Data]', updated Sep 18, 2026 — national average $3,500; most homeowners $2,250–$5,500; $15.50–$39 per linear foot installed; materials $11.50–$30 per linear foot; labour $4–$8 per linear foot; 1 acre (835 ft) $12,900–$32,600, average $22,800; by material per linear foot (cedar $11.50–$18; pine $11.50–$18.50; black locust $20–$30; composite $12–$25; vinyl $18.50–$25; steel $20–$25; aluminum $25–$30); gate about $200; wire mesh about $1.66 per linear foot; removal $3–$5 per linear foot plus $100–$500 disposal; permits $20–$60 (often none under 6–8 ft); stain $500–$3,000; grading $900–$3,000; survey $800–$5,500; install 24–72 hours; labour about $50 per hour. NOTE: Angi's 'labour ~50% of total' claim is arithmetically incompatible with its $4–$8 labour on a $15.50–$39 total, and its prose pine $4–$10 per foot is materials-only — both flagged, neither used. HomeGuide, 'How Much Does a Split Rail Fence Cost?', updated Dec 22, 2025 — $15–$35 per linear foot; 200 ft $3,000–$7,000; by length (100 ft $1,500–$3,500; 150 ft $2,250–$5,250; 300 ft $4,500–$10,500); by material per linear foot (cedar $25–$35; pine $15–$25; black locust $20–$40; vinyl $15–$30; composite $20–$35; aluminum $20–$40; steel $25–$45); by rails (2-rail $15–$20; 3-rail $20–$25; 4-rail $25–$30; 5-rail $30–$35 per foot); labour $5–$15 per linear foot; with mesh $35–$40 per foot total; removal $7–$20 per foot; permits $40–$150; stain $2–$14 per foot; survey $200–$1,200; lifespan 10–30 years (pine 10–15, cedar 20–25, black locust 20–25). NOTE: HomeGuide's per-acre table ($8,300–$11,500 per acre, about $10–$13 per foot) contradicts its own $15–$35 per foot band and is NOT used. Fixr, 'Split Rail Fence Cost', updated Jan 31, 2025 — split rail $8–$16 per foot installed, materials $3–$6 per foot; generic wood-fence labour $10–$20 per foot, $25–$60 per hour; gate $52–$300 by size (6 ft $78–$150); removal $2–$5 per foot; permits $70–$200 (under 6 ft), $200–$400 (6 ft+); survey about $575; stain about $1,500 average fence. CostHelper (undated) — materials $3–$9 per foot; installed $8–$25+ per foot; 100 ft $900–$3,000; acre $6,800–$21,000. Best Fence Charlotte (contractor, published Feb 15, 2026) — pine $10–$13, cedar $12–$16, black locust $14–$18, vinyl $15–$25 per foot; mesh +$2–$5 per foot; crew installs 200–300 ft per day; pine 10–15 years, cedar 15–20, black locust 20–30+ years. NOTE: Angi and HomeGuide are the same data family (Angi Inc.) — they count as one source here, not two. Independent families: (1) Angi Inc., (2) Fixr, (3) CostHelper, (4) Best Fence Charlotte. Disagreements published, not averaged: headline $/ft Angi/HomeGuide $15–$35 vs Fixr $8–$16 / Charlotte $10–$18 (overlap only $15–$16 — Fixr and Charlotte are bare-bones installed rates, Angi/HomeGuide include more scope); cedar NO overlap — Angi $11.50–$18 vs HomeGuide $25–$35 vs Charlotte $12–$16 (published $12–$35 with the split named); black locust $14–$40 across sources; labour share Angi $4–$8 vs HomeGuide $5–$15 vs Fixr generic wood $10–$20 per foot; gate Fixr $52–$300 vs Angi about $200; removal Fixr $2–$5 / Angi $3–$5 vs HomeGuide $7–$20 (2–4x, flagged); permits $20–$200 across sources; survey $200–$5,500 across sources (wide band, scope); mesh Angi +$1.66 per foot vs Charlotte +$2–$5. Breakdown shares are derived from the worked example below. Checked November 2026.. Sources last checked: October 2026 — HomeGuide, Fixr, Angi, CostHelper. How we calculate these costs

Cost by scope

Split Rail Fence Installation cost ranges by scope — chart of the table below
ScopeTypical costWhat it includes
Budget — 150 ft pine 2-rail$1,500 – $2,400A 150 ft two-rail pine fence at $10–$16 per linear foot installed — the low end of the published bands (Fixr $8–$16, Best Fence Charlotte pine $10–$13). No gate, no stain, flat ground, no mesh.
Standard — 150 ft cedar/pine 3-rail$3,000 – $3,750The most-pay tier — the worked example below: a 150 ft three-rail cedar fence at $20–$25 per linear foot (HomeGuide's 3-rail band), with one walk gate and a light stain. Angi's average for a typical fence is $3,500.
Premium — 150 ft black locust/vinyl 4-rail + mesh$4,500 – $6,000A 150 ft four-rail black locust or vinyl fence with wire mesh at $30–$40 per linear foot, with two gates. Black locust lasts 20–30+ years and vinyl needs no stain — both sit at the top of every source's material table.

Where the money goes

Part of the jobShareNote
Materials — rails and posts51% of total$1,800 for materials — 150 ft of 3-rail cedar at $12 per linear foot, inside Angi's $11.50–$18 cedar band (HomeGuide prices cedar much higher, $25–$35 — see the disagreement note). Share derived from the worked example below.
Labour — installation34% of total$1,200 for labour — 150 ft at $8 per linear foot, at the top of Angi's $4–$8 band and inside HomeGuide's $5–$15 band. A crew installs 200–300 ft a day (Best Fence Charlotte), so a 150 ft fence takes 24–72 hours (Angi). Share derived from the worked example below.
Stain9% of total$300 for a light stain — $2 per linear foot, at the floor of HomeGuide's $2–$14 band; Angi prices a full stain job at $500–$3,000. Share derived from the worked example below.
Walk gate4% of total$150 for one 6 ft walk gate — at the top of Fixr's $78–$150 band for a 6 ft gate; Angi prices a gate at about $200. Share derived from the worked example below.
Permit2% of total$50 for a permit — inside Angi's $20–$60 band; many places need no permit at all for a fence under 6–8 ft. Share derived from the worked example below.
Materials — rails and posts · 51%Labour — installation · 34%Stain · 9%Walk gate · 4%Permit · 2%
Estimator’s note: on a split rail fence installation, materials — rails and posts is usually where quotes swing most (51% of total of a typical budget). Ask every contractor to itemize that line in writing — totals are only comparable when that part is.
A split-rail fence corner in a green field with a tree: a 3-rail cedar fence like this is the standard tier — $20–$25 per linear foot installed, or about $3,000–$3,750 for 150 feet.
A split-rail fence corner in a green field with a tree: a 3-rail cedar fence like this is the standard tier — $20–$25 per linear foot installed, or about $3,000–$3,750 for 150 feet.

What moves the price most

Worked example — $3,500 most-pay fence (150 ft, 3-rail cedar, one 6-ft walk gate, light stain): materials $1,800 (51.4%) + labour $1,200 (34.3%) + stain $300 (8.6%) + gate $150 (4.3%) + permit $50 (1.4%) = $3,500, or $23.33 per linear foot — inside Angi's $15.50–$39 and HomeGuide's $15–$35 bands, and above Fixr's bare-bones $8–$16 band because this example includes a gate and stain, which Fixr's band does not. Every line sits inside its published band; the breakdown bar rounds the shares to whole numbers. Where sources disagree: the headline rate — Angi/HomeGuide $15–$35 vs Fixr $8–$16 and Best Fence Charlotte $10–$18 per foot (overlap only $15–$16; Fixr and Charlotte are bare-bones installed rates, Angi/HomeGuide include more scope); cedar — Angi $11.50–$18 vs HomeGuide $25–$35 vs Charlotte $12–$16 per foot, with NO overlap (published here as $12–$35 with the split named); black locust $14–$40 across sources; labour — Angi $4–$8 vs HomeGuide $5–$15 vs Fixr's generic wood-fence $10–$20 per foot; gate — Fixr $52–$300 vs Angi about $200; removal — Fixr $2–$5 and Angi $3–$5 per foot vs HomeGuide $7–$20 (two to four times both, flagged not averaged); permits $20–$200 across sources; survey $200–$5,500 across sources (wide band, scope); mesh — Angi about +$1.66 per foot vs Charlotte +$2–$5. Angi and HomeGuide are the same data family (Angi Inc.) — they count as one source here; Fixr, CostHelper and Best Fence Charlotte are the independent cross-checks. HomeGuide's per-acre table ($8,300–$11,500 per acre, about $10–$13 per foot) contradicts its own $15–$35 per foot band and is NOT used. Timeline: a typical install takes 24–72 hours (Angi); a crew installs 200–300 ft a day (Best Fence Charlotte). Lifespan: pine 10–15 years, cedar 20–25 years, black locust 20–30+ years (Best Fence Charlotte, HomeGuide). Related costs: fence installation, wood fence installation, vinyl fence installation, chain link fence installation and fence gate installation.

Work out your quantities: before you compare quotes, run your measurements through our free remodeling calculators (paint, tile, concrete and flooring) — each one shows its formula and runs entirely in your browser.

Costs in your city

Labor is the biggest variable in any remodel, and labor is local — the same bathroom can price very differently in Houston than in Boston. We are adding city editions metro by metro, each with its own labor index, permit notes and climate factors, written for that city rather than copied from this page. Wave 1: Houston, Dallas–Fort Worth, Phoenix, Atlanta, Miami–South Florida, Orlando, Tampa, Charlotte, Austin and San Antonio. Until your city's page is live, use the national range here and weight it the way contractors do: Sun Belt labor often prices near or below the national middle, while coastal California and the Northeast metros often price well above it.

How this estimate was built: the range on this page is a synthesis of at least three published industry sources (national cost guides and the Remodeling Magazine Cost vs. Value data among them), cross-checked in October 2026. We publish planning ranges, never a single pretend-precise price. Full method: How We Estimate Costs.
Split-rail logs tied with wire in close view: the rails are the material line — about $1,800 of the $3,500 worked example — and wire mesh adds about $1.66 per foot (Angi).
Split-rail logs tied with wire in close view: the rails are the material line — about $1,800 of the $3,500 worked example — and wire mesh adds about $1.66 per foot (Angi).

Frequently asked questions

How much does a split rail fence cost?

Most homeowners pay $2,250–$5,500, with Angi's 2026 average at $3,500 — $15.50–$39 per linear foot installed. Fixr's lower $8–$16 per foot band is a bare-bones installed rate without a gate or stain; HomeGuide agrees with Angi at $15–$35 per foot. A typical 150 ft fence lands around $3,000–$3,750.

How much does a split rail fence cost per foot by material?

Cedar is the contested one: Angi $11.50–$18, HomeGuide $25–$35 and Best Fence Charlotte $12–$16 per linear foot — published here as $12–$35 with the split named. Pine runs $10–$16 (Charlotte $10–$13, HomeGuide $15–$25), black locust $14–$40, vinyl $15–$30 and composite $12–$35. By rail count, HomeGuide prices 2-rail $15–$20, 3-rail $20–$25, 4-rail $25–$30 and 5-rail $30–$35 per foot.

How long does a split rail fence last?

Pine 10–15 years, cedar 20–25 years and black locust 20–30+ years (Best Fence Charlotte, HomeGuide). Vinyl does not rot and needs no stain. Staining every few years is what keeps a wood fence at the long end of its range.

Do I need a permit for a split rail fence?

Often not: Angi notes no permit is usually needed for a fence under 6–8 ft, and where one is required it runs $20–$60 (Angi), $40–$150 (HomeGuide) or $70–$200 (Fixr) — the wide spread is different permit scopes, not different fences. Check the local height and property-line rules before building.

How long does it take to install a split rail fence?

Angi puts a typical install at 24–72 hours, and a crew installs 200–300 ft a day (Best Fence Charlotte) — so a 150 ft fence is usually a one-day job on flat, clear ground. Grading ($900–$3,000, Angi) or a survey ($200–$5,500 across sources) adds time before the posts go in.

What does removing an old split rail fence cost?

Removal runs $2–$5 per linear foot (Fixr) or $3–$5 plus $100–$500 disposal (Angi). HomeGuide's $7–$20 per foot is two to four times both — flagged here rather than averaged in.

Before you sign: get at least 3 written local quotes for the same written scope, confirm permits and who pulls them, and keep a 10–20% contingency separate from the contract price.

Ahsan ul Haq — Editor, Remodel Cost Hub

Ahsan compiles and edits the cost guides on Remodel Cost Hub, cross-checking every range against at least three published sources before it is published — the full method is on our Methodology page. Spot an error on this page? Send a correction.

Split Rail Fence Installation cost range graphic
Save this range for later: Pin it on Pinterest

Related cost guides

Victorian white house with a prominent multi-panel projecting bay window

Bow Window Installation Cost

$3,000 – $8,000

A new bow window, professionally installed — Angi's 2026 average is $3,900, with most homeowners paying $1,500–$15,000. A bow window is four to six panels set about 10° apart, curving out 24–36 inches — the curved cousin of a bay window, and about 1.5–2.5x the price of a comparable bay. Prefab units start near $1,500; custom wood or composite windows run $10,000–$15,000+.

Beach volleyball match on sand, a player diving for the ball beside the net

Volleyball Court Installation Cost

$20,000 – $40,000

A standard residential outdoor hard volleyball court — regulation 29 ft 5 in × 59 ft (about 1,740 sq ft), 4-inch concrete base with a modular tile surface, professionally installed. The typical band $20,000–$40,000 is Angi's 30×50 ft multi-sport court band, and the $28,000 most-pay figure is Angi's published average for that 30×50 ft court — no source publishes a volleyball-specific average, so this page anchors on the closest published court and says so. Sand and indoor courts are priced separately below, never merged into this band.

Indoor golf simulator room with a projected virtual course, golf bag and turf floor

Golf Simulator Installation Cost

$4,000 – $8,000

A standard home golf simulator room — a mid-range launch monitor, an enclosure with an impact screen, a short-throw projector, a hitting mat, a gaming PC and first-year software, in an existing garage or basement room about 10×12 ft with a 9 ft ceiling, assembled DIY with professional projector mounting only. The typical band $4,000–$8,000 and the $7,193 most-pay figure are built from specialist publishers' worked examples — no Angi, HomeGuide or Fixr guide exists for this topic, and the page names its sources. The $7,193 figure is the midpoint of two worked examples, not a survey average.

Covered outdoor living room with a large flat-screen TV wall-mounted on a wood-paneled wall

Outdoor TV Installation Cost

$2,900 – $5,100

A 55-inch purpose-built weatherproof TV (IP55, full-shade to partial-sun), wall-mounted under a covered patio, with a new dedicated GFCI outlet, an outdoor-rated mount, weatherproof cable management and surge protection, professionally installed. The typical band $2,900–$5,100 and the $3,800 most-pay figure are built bottom-up from verified component costs — no source publishes a surveyed outdoor-TV-installation total, and the page says so. Angi publishes indoor mounting costs only. Keep the weatherproof-TV route and the indoor-TV-in-an-enclosure route separate — they are different products with different prices.

Orange wooden treehouse with a red tile roof, built around a tree trunk, with a staircase and railing

Treehouse Installation Cost

$8,000 – $15,000

A professionally built, enclosed backyard treehouse — about 100 sq ft (10×10 ft), on a single healthy tree with a trunk at least 12 inches across, about 8 ft off the ground, with a gable roof, standard walls with windows and a door, a safety railing, a fixed wooden ladder and a small surrounding deck, in naturally rot-resistant wood (cypress or redwood). No electricity, no plumbing, no insulation, no second level, no zipline or slide. The most-pay figure $15,000 is Fixr's published figure for exactly this spec; lower national averages ($7,350–$11,150) include smaller and simpler builds, so $15,000 is the most-pay figure for the defined 100 sq ft enclosed spec, not for any treehouse.

Stainless steel waterfall feature pouring water into a blue-tiled swimming pool

Pool Pump Installation Cost

$700 – $1,300

A like-for-like replacement of a 1.5 HP variable-speed pump on an in-ground pool — same type and size, no new circuit, no re-plumbing, permit where required. The most-pay figure $1,000 is Fixr's published national average for a variable-speed pump installed in an in-ground pool, corroborated by HomeGuide's $900 national average. 2026 price caveat: a 2026 retail-price check puts a typical 1.5–1.65 THP variable-speed pump alone at a $1,739 median list price, so a full variable-speed swap often lands at $1,839–$2,139 with labour — shoppers seeing quotes in that range are not being overcharged; the $1,000 average reflects older and mixed-type jobs, and both Fixr (January 2025) and HomeGuide (July 2025) predate the September 29, 2025 DOE variable-speed motor rule.