Home › Cost Guides › Soundproofing Installation
Cost Guide

How Much Does a Soundproofing Installation Cost? (2026)

By Ahsan ul Haq · Last updated: 11 November 2026 · Planning estimate — not a quote · How we estimate

Typical range
$1,000 – $2,750
Most homeowners pay around $1,900 · Soundproofing a room typically costs $1,000 – $2,750 for one standard room treated by a professional, with about $1,900 the figure most jobs land near — Angi averages $1,881 with most projects at $1,036–$2,743 at $10–$30 per square foot of treated surface, HomeGuide prices a wall at $100–$2,000, a ceiling at $150–$1,200 and a floor at $100–$1,000, and Soundproof Cow puts most projects at $4–$30 per square foot. A single-wall panel treatment lands below the band, and a decoupled studio-grade room runs above it, while the materials, labor and sealing below are all inside the total.
typical
$1,000$2,750
Low end = minor scope  ·  marker = typical middle  ·  high end = major scope. Add 10–20% contingency to any budget.
A bright treated music studio room with a drum kit, guitar and seating

Soundproofing Installation cost at a glance

  • Typical range: $1,000 – $2,750
  • Most homeowners pay: around $1,900
  • Prices vary most by: Materials — panels, MLV, drywall, insulation (40–55% of the budget)

Cross-checked against two published sources for this project. Sources used for this page: Angi's soundproofing cost guide, updated September 22, 2026 (national average $1,881 across 194 verified projects, most $1,036–$2,743; $10–$30 per square foot of treated surface; wall panels $1.50–$5, foam insulation $1–$3, mass-loaded vinyl $2–$5 per square foot; walls $1–$10, ceilings $5–$20, floors $2–$8 per square foot; soundproof drywall about $75 a sheet; bedroom $300–$1,500; contractor labor $250–$500 for extensive work; sound-absorbing panels $10–$100 each), HomeGuide's soundproofing cost guide (wall $100–$2,000, ceiling $150–$1,200, floor $100–$1,000; soundproofing professional $8–$13 per square foot; soundproof drywall $30–$100 per 4-by-8-foot panel for materials; spray foam $1.50–$5.00, blown-in fiberglass $1.00–$2.80 per square foot) and Soundproof Cow's 2026 soundproofing guide (most projects $4–$30 per square foot; mid-range residential $6–$12; MLV $2–$5 per square foot; wall surface treatment $4–$14, ceiling $6–$16, floor $2–$6 per square foot), with Earppies' professional soundproofing guide (decoupled wall $12–$25, high-performance double-stud $25–$45, isolated ceiling $8–$25 per square foot; mid-range studio room $5,760–$11,520 for a 144-square-foot room) for the studio-grade tier. Sources last checked: October 2026 — HomeGuide, Angi. How we calculate these costs

Cost by scope

Soundproofing Installation cost ranges by scope — chart of the table below
ScopeTypical costWhat it includes
Single-wall surface treatment — the low end$300 – $1,500The cheap end: Angi prices a bedroom treatment at $300–$1,500 and wall panels at $1.50–$5 per square foot — foam or fabric panels that tame echo inside the room, not a full sound-blocking assembly
Standard full room, pro-installed — the typical job$1,000 – $2,750The shared band itself: Angi’s $1,036–$2,743 most-jobs band at $10–$30 per square foot of treated surface, with HomeGuide’s per-surface figures inside it
Decoupled studio-grade room — the top end$5,000 – $12,000The expensive end: decoupled walls at $12–$25 per square foot, an isolated ceiling at $8–$25, and an acoustic door and HVAC silencing on top — the build that chases a high STC rating, with Earppies pricing a mid-range studio room at $5,760–$11,520 for a 144-square-foot room

Where the money goes

Part of the jobShareNote
Materials — panels, MLV, drywall, insulation40–55% of totalThe treatment itself: Angi prices wall panels at $1.50–$5 per square foot, mass-loaded vinyl at $2–$5 and soundproof drywall at about $75 a sheet — mass and decoupling layers are what block sound, while foam alone only absorbs it
Installation labor35–50% of totalThe build: HomeGuide prices a soundproofing professional at $8–$13 per square foot, and Angi prices contractor labor at $250–$500 for extensive work — removing drywall, decoupling and resealing are the labor-heavy steps
Doors, windows and sealing10–20% of totalThe weak points: Angi notes windows and doors push costs considerably higher than walls, and HomeGuide’s per-surface figures exclude them — seals, solid-core doors and window inserts close the gaps a wall treatment leaves
Materials — panels, MLV, drywall, insulation · 40–55%Installation labor · 35–50%Doors, windows and sealing · 10–20%
Estimator’s note: on a soundproofing installation, materials — panels, mlv, drywall, insulation is usually where quotes swing most (40–55% of total of a typical budget). Ask every contractor to itemize that line in writing — totals are only comparable when that part is.
Black pyramid acoustic foam in close view: foam at $1–$3 per square foot in Angi absorbs echo inside the room — it does not block sound through the wall
Black pyramid acoustic foam in close view: foam at $1–$3 per square foot in Angi absorbs echo inside the room — it does not block sound through the wall

What moves the price most

Treated surface area is the first driver: Angi prices soundproofing at $10–$30 per square foot of treated surface, not floor area — a room with four walls and a ceiling carries far more treated area than its floor plan suggests. Method is second: surface panels at $1.50–$5 per square foot in Angi only tame echo, mass-loaded vinyl at $2–$5 plus a second drywall layer blocks far more, and a decoupled wall at $12–$25 per square foot in Earppies is a different build entirely. Surface is third: Angi prices walls at $1–$10 per square foot against ceilings at $5–$20 and floors at $2–$8 — overhead work and impact-noise floors cost more than a flat wall. Weak points are fourth: doors, windows and HVAC paths leak the sound a treated wall blocks, and Angi notes they push the total considerably higher. Finally, DIY versus pro decides the labor line: panels at $10–$100 each in Angi are a weekend job, while MLV, double drywall and decoupling are pro work, which is why the standard band assumes a professional install.

Work out your quantities: before you compare quotes, run your measurements through our free remodeling calculators (paint, tile, concrete and flooring) — each one shows its formula and runs entirely in your browser.

Costs in your city

Labor is the biggest variable in any remodel, and labor is local — the same bathroom can price very differently in Houston than in Boston. We are adding city editions metro by metro, each with its own labor index, permit notes and climate factors, written for that city rather than copied from this page. Wave 1: Houston, Dallas–Fort Worth, Phoenix, Atlanta, Miami–South Florida, Orlando, Tampa, Charlotte, Austin and San Antonio. Until your city's page is live, use the national range here and weight it the way contractors do: Sun Belt labor often prices near or below the national middle, while coastal California and the Northeast metros often price well above it.

How this estimate was built: the range on this page is a synthesis of at least three published industry sources (national cost guides and the Remodeling Magazine Cost vs. Value data among them), cross-checked in October 2026. We publish planning ranges, never a single pretend-precise price. Full method: How We Estimate Costs.
Wedge foam panels against a yellow wall: panels are the low end of the ladder at $1.50–$5 per square foot in Angi, while mass and decoupling layers do the actual blocking
Wedge foam panels against a yellow wall: panels are the low end of the ladder at $1.50–$5 per square foot in Angi, while mass and decoupling layers do the actual blocking

Frequently asked questions

How much does it cost to soundproof a room?

About $1,000–$2,750 for one standard room treated by a professional, with about $1,900 the common middle. Angi averages $1,881 across 194 verified projects, most at $1,036–$2,743.

Do acoustic foam panels soundproof a room?

No — foam absorbs echo inside the room; it does not block sound passing through the wall. Angi prices foam insulation at $1–$3 per square foot and panels at $1.50–$5: useful for a recording or listening room, but real soundproofing needs mass and decoupling, like MLV plus a second drywall layer.

What does soundproofing cost per square foot?

About $10–$30 per square foot of treated surface in Angi, and $4–$30 in Soundproof Cow — and treated surface is the key phrase: it is the wall, ceiling and floor area being treated, not the room’s floor area.

Which surface should I treat first?

The walls: they are the cheapest surface in Angi at $1–$10 per square foot and usually the largest leak. Ceilings and floors come next, and doors, windows and HVAC paths must be sealed too, or sound simply goes around the treated wall.

Can I soundproof a room myself?

Partly: panels and seals are DIY-friendly, and Angi prices sound-absorbing panels at $10–$100 each. A full blocking assembly — MLV, double drywall, decoupled framing — is pro work, and it is what the $1,000–$2,750 standard band assumes.

Before you sign: get at least 3 written local quotes for the same written scope, confirm permits and who pulls them, and keep a 10–20% contingency separate from the contract price.

Ahsan ul Haq — Editor, Remodel Cost Hub

Ahsan compiles and edits the cost guides on Remodel Cost Hub, cross-checking every range against at least three published sources before it is published — the full method is on our Methodology page. Spot an error on this page? Send a correction.

Soundproofing Installation cost range graphic
Save this range for later: Pin it on Pinterest

Related cost guides

Living room with a smooth finished ceiling after popcorn removal

Popcorn Ceiling Removal Cost

$1,500 – $3,000

Typical cost for about 500 sq ft, removed and refinished — removal with skim, prime and paint runs about $2 – $6 per sq ft across the published guides

Open white six-panel interior door between a tiled bathroom and a carpeted bedroom

Interior Door Installation Cost

$300 – $700

Typical cost for one standard interior door, pre-hung and installed — a standard single door runs about $300 – $700 installed across the published guides

Living room with a large wooden sliding door open to the next room

Pocket Door Installation Cost

$800 – $2,500

A pocket door installation typically costs $800 – $2,500 for a standard single door, with about $1,050 the figure most standard jobs land near — Angi prices pocket door installation at $800–$2,500 with a $1,050 national average in its October 2026 guide, HomeGuide prices pocket installation at $500–$2,500 including parts and labor, and ThePricer puts the typical installed price for a single pocket door at $800–$2,500 with an average near $1,050, corroborated by Homewyse at $1,112–$1,705 for favorable site conditions. The $800–$2,500 typical band is the Angi band, and $1,050 is Angi's average — a door fitted during new construction can come in below it, and a double or French door in an existing wall costs far more, while the door, labor and finishing below are all inside the total.

Open-plan living room with a ceiling fan and light kit

Ceiling Fan Installation Cost

$250 – $550

Typical cost for one standard ceiling fan installed on existing wiring, fan included — a standard install runs about $250 – $550 across the published guides

Finished basement recreation room lit by a run of recessed ceiling lights

Recessed Lighting Installation Cost

$700 – $1,650

Typical cost to install 6 recessed lights in an existing ceiling — about $125 – $300 per light installed across the published guides

Formal dining room with a stepped tray ceiling finished in wide crown molding

Crown Molding Installation Cost

$450 – $1,100

Typical cost to install crown molding in one standard living room of about 58 linear feet — standard profiles run about $7 – $16 per linear foot installed across the published guides