Home › Cost Guides › Pool Resurfacing
Cost Guide

How Much Does Pool Resurfacing Cost? (2026)

By Ahsan ul Haq · Last updated: 11 November 2026 · Planning estimate — not a quote · How we estimate

Typical range
$6,000 – $15,000
Most homeowners pay around $11,000 · The typical project is a concrete pool of about 1,000 sq ft: drained, prepped and cleaned, minor cracks and fittings repaired, then replastered or finished in pebble aggregate, cured and refilled. Paint refreshes and full tile jobs are tiered separately; this band is the standard professional resurfacing most pool owners actually buy.
typical
$6,000$15,000
Low end = minor scope  ·  marker = typical middle  ·  high end = major scope. Add 10–20% contingency to any budget.
Empty indoor swimming pool with tiled floor and walls

Pool Resurfacing cost at a glance

  • Typical range: $6,000 – $15,000
  • Most homeowners pay: around $11,000
  • Prices vary most by: Finish material (40–50% of the budget)

Cross-checked against three published sources for this project. Sources used for this page: the Angi pool resurfacing cost guide (2026), HomeGuide's pool resurfacing cost guide and This Old House's pool resurfacing data. Sources last checked: October 2026 — This Old House, HomeGuide, Angi. How we calculate these costs

Cost by scope

Pool Resurfacing cost ranges by scope — chart of the table below
ScopeTypical costWhat it includes
Paint refresh$1,000 – $2,000Angi prices repainting at $1,500 per 1,000 sq ft and HomeGuide at $1,000–$2,000; This Old House prices pool paint at about $1 a square foot. The cheapest route — and the shortest-lived: 2–5 years in Angi, 5–7 in HomeGuide, 2–3 for acrylics in This Old House.
Standard replaster — the typical job$6,000 – $10,000Angi prices replastering at $5,500 per 1,000 sq ft ($5–$6 a square foot) and HomeGuide at $6,000–$8,000 ($6–$8 a square foot); This Old House cites about $5 a square foot. The middle ground the guides agree on — reasonably durable at 7–12 years, cost-effective per year of service.
Pebble aggregate or full tile$10,000 – $30,000+Aggregate runs $6,500 per 1,000 sq ft in Angi and $7–$15 a square foot in HomeGuide; full tile runs $8–$30+ a square foot in HomeGuide and $30,000 per 1,000 sq ft in Angi — a tile finish can price six figures on a large pool in This Old House. Pebble lasts 15–20+ years; tile, 20+.

Where the money goes

Part of the jobShareNote
Finish material40–50% of totalThe finish is the price: plaster at $5–$8 a square foot, pebble at $7–$15 and tile at $8–$30+ in HomeGuide's tables ($4–$6, $10 and ~$25–$35 respectively in Angi). Choosing the finish is choosing the budget
Crew labour30–45% of totalLabour at $45–$110 an hour in HomeGuide ($45–$65 in Angi) over a 5–7 day job — prep, application, finishing and cure supervision
Drain, clean & refill5–15% of totalAngi budgets $425–$475 all-in ($175–$225 drain + $250 clean + ~$55 per 5,000 gallons); HomeGuide prices drain and clean at $600–$650 alone, plus $40–$400 by hose or $400–$2,000 by water truck — the guides genuinely disagree on this line
Repairs & prep5–10% of totalAngi prices typical repairs at $240–$1,200 (minor $50–$300); cracks, fittings and tile grout fixed before the new finish goes down — prep is not optional on a lasting job
Finish material · 40–50%Crew labour · 30–45%Drain, clean & refill · 5–15%Repairs & prep · 5–10%
Estimator’s note: on pool resurfacing, finish material is usually where quotes swing most (40–50% of total of a typical budget). Ask every contractor to itemize that line in writing — totals are only comparable when that part is.
The finished product — the finish is the budget: plaster $5–$8 a square foot, pebble $7–$15, tile $8–$30+ in the guides' tables.
The finished product — the finish is the budget: plaster $5–$8 a square foot, pebble $7–$15, tile $8–$30+ in the guides' tables.

What moves the price most

The finish is the budget. Paint at $1 a square foot, plaster at $5–$8, pebble at $7–$15, tile at $8–$30+ — HomeGuide's finish ladder is the whole story in one table, and lifespans run with the price: paint 2–7 years, plaster 7–12, pebble 15–20+, tile 20+. Pool size multiplies everything: Angi prices concrete resurfacing at about $6,500 per 1,000 sq ft, so a 2,000 sq ft pool is $13,000 at the same finish. Pool type changes the job entirely: vinyl pools are not resurfaced — the liner is replaced — at $1,000–$3,500 per 1,000 sq ft in Angi against $3,000–$7,500 inground in HomeGuide, another genuine disagreement. And drain, clean and refill is its own argument: Angi's $425–$475 all-in against HomeGuide's $600–$650 plus refill — get the prep number in writing before comparing finish quotes.

Work out your quantities: before you compare quotes, run your measurements through our free remodeling calculators (paint, tile, concrete and flooring) — each one shows its formula and runs entirely in your browser.

Worked example: how a typical pool resurfacing budget breaks down

Take the typical job — a concrete pool of about 1,000 sq ft: drained, prepped and cleaned, minor cracks and fittings repaired, then finished in pebble aggregate, cured and refilled. Here is a realistic $11,000 version of that invoice, at Angi's $11,000 average for a 1,000 sq ft pool: The budget below totals $11,000 — the "most homeowners pay around" figure from the top of this page — split using this page's own cost breakdown. It shows how a real quote at that level is usually composed; every line is built from the ranges on this page, and it is an illustration, not a quote for your project.

Line itemExample budget
Pebble finish — 1,000 sq ft$5,000
Crew labour — prep, application & finish$4,500
Drain, clean & refill$1,000
Minor repairs before resurfacing$500
Total$11,000

What most people get wrong

  • Choosing the finish on price alone. Paint at $1 a square foot is the cheapest route and the shortest-lived — 2–5 years in Angi, 5–7 in HomeGuide. A paint job that needs redoing in three years is the most expensive finish per year of service.
  • Comparing quotes without the prep line. Angi budgets drain, clean and refill at $425–$475 all-in; HomeGuide prices it at $600–$650 plus refill. A quote that hides the prep line is not a cheaper quote — it is an incomplete one.
  • Skipping repairs to hit a number. Angi prices typical repairs at $240–$1,200 — cracks and tired fittings fixed before the new finish goes down are the difference between a finish that lasts and one that delaminates.
  • Treating a vinyl pool like a concrete one. Vinyl pools are not resurfaced — the liner is replaced ($1,000–$3,500 per 1,000 sq ft in Angi, $3,000–$7,500 in HomeGuide). Get the right scope for your pool type before signing.

Costs in your city

Resurfacing prices follow climate and crew rates together. Warm-climate markets see the most pool contractors and the most competitive pricing; colder markets see fewer bidders and shorter seasons. Labour at $45–$110 an hour in HomeGuide ($45–$65 in Angi) means the same finish prices very differently by metro. Water costs write a local line too — HomeGuide prices refill by water truck at $400–$2,000 — so ask each contractor for the drain, clean and refill number in writing and city quotes become comparable line by line.

How we got these numbers

Cross-checked against the Angi pool resurfacing cost guide — opened and read in full this run, August 2026 data (average $11,000 for a 1,000 sq ft pool; most homeowners pay $6,000–$15,000; labour $45–$65 an hour; concrete ~$6,500 per 1,000 sq ft; finishes per 1,000 sq ft — repaint $1,500, replaster $5,500, aggregate $6,500, tile $30,000; plaster $5–$6 a square foot, aggregate $5–$7, tile $4–$30; drain, clean and refill $425–$475; repairs $240–$1,200; 5–7 day timeline), HomeGuide's pool resurfacing cost guide — read in full this run ($6,000–$15,000 average; finish table paint $1–$2 / plaster $6–$8 / pebble $7–$15 / tile $8–$30+ a square foot; labour $45–$110 an hour; drain and clean $600–$650 plus refill; vinyl liner $3,000–$7,500 inground; 5–7 day timeline) and This Old House's pool resurfacing data — read in full this run (plaster ~$5 a square foot; epoxy from $1,500; tile $4 ceramic to $7–$50+ stone/glass; vinyl $1–$5 a square foot; concrete replaster every 10–20 years). The typical band $6,000–$15,000 is the range Angi and HomeGuide agree on exactly; the $11,000 most-pay figure is Angi's published average. The guides genuinely disagree on the drain, clean and refill line (Angi $425–$475 all-in against HomeGuide $600–$650 plus refill) and on vinyl liner replacement ($1,000–$3,500 in Angi against $3,000–$7,500 in HomeGuide) — both disagreements are published as-is. No guide publishes a materials-versus-labour percentage split for resurfacing; the breakdown shares are derived from the guides' per-square-foot and hourly dollar figures and are labelled as derived on the page.

Finish detail — the drain, clean and refill line runs $425–$650 across the guides, and fittings like the main drain are checked before the new finish goes down.
Finish detail — the drain, clean and refill line runs $425–$650 across the guides, and fittings like the main drain are checked before the new finish goes down.

Frequently asked questions

How much does it cost to resurface a pool?

Angi prices the average at $11,000 for a 1,000 sq ft pool, with most homeowners paying $6,000–$15,000; HomeGuide prices the same $6,000–$15,000 band. Around $11,000 is the middle of the market for a standard concrete pool replaster or pebble finish.

How often does a pool need resurfacing?

HomeGuide prices the cycle at every 7–15 years, depending on the finish: plaster 7–12 years, quartz plaster 10–15, pebble 15–20+ and paint 5–7. Angi prices plaster at 10 years and pebbles at 20+. Water chemistry is the lever you control — the guides agree that neglected chemistry eats finish life.

Plaster, pebble or tile — which finish should I choose?

Plaster ($5–$8 a square foot) is the cost-effective middle: smooth, 7–12 years. Pebble ($7–$15) costs more and lasts 15–20+ years with a textured feel some swimmers dislike. Tile ($8–$30+, and $30,000 per 1,000 sq ft in Angi) is the longest-lived and the most expensive — easy to repair one tile at a time, brutal on the budget all at once. HomeGuide's finish tables make this the cleanest comparison on the page.

Can I just paint my pool instead of resurfacing?

Yes, and it is the cheapest route — about $1 a square foot, $1,000–$2,000 all-in — but the lifespan is the trade: 2–5 years in Angi, 5–7 in HomeGuide, 2–3 for acrylic paint in This Old House (epoxy runs 7–10). Paint is a holding pattern, not a resurfacing: it buys a few seasons while you budget for the real finish.

How long does pool resurfacing take?

Five to seven days in Angi and HomeGuide — drain, prep, apply, finish — with some finishes needing 7–10 days of cure before the pool is filled. Paint jobs run 1–2 days; bad weather or a remote site can stretch the job to two weeks in Angi. Plan the drain for a week you can be without the pool.

Before you sign: Finish, size, prep — a fair resurfacing quote names all three, and the $11,000 middle of the market is one standard concrete pool, refinished and refilled.

Ahsan ul Haq — Editor, Remodel Cost Hub

Ahsan compiles and edits the cost guides on Remodel Cost Hub, cross-checking every range against at least three published sources before it is published — the full method is on our Methodology page. Spot an error on this page? Send a correction.

Pool Resurfacing cost range graphic
Save this range for later: Pin it on Pinterest

Related cost guides