Clawfoot Tub Installation cost at a glance
- Typical range: $2,000 – $5,500
- Most homeowners pay: around $3,500
- Prices vary most by: Plumbing labour, straightforward (20–50% of the budget)
Cross-checked against two published sources for this project. Sources used for this page: Fixr, 'Bathtub Replacement: How Much Does It Cost in 2025?', updated Aug 29, 2025 (all bathtubs national average ~$6,000, range $2,000–$10,500; by type installed freestanding/clawfoot $1,200–$10,000, alcove $450–$1,400, drop-in $900–$5,000, undermount $1,200–$8,000, Japanese style $1,200–$24,000, corner $1,400–$8,000; labour 20–50% of total, average $1,200–$3,000; build-back $800–$3,000 after removing an alcove tub; utilities upgrade +$250–$500; old tub removal $200–$1,200; structural reinforcement 'could increase by $2,000 or more' in a shower-to-tub conversion context; install 6–8 hours average, 9–12 hours with water damage or new plumbing; lifespan most tubs 10–30 years, cast iron nearly 100 years, acrylic 10–20 years; faucet/hardware replacement average $300 — its $6,000 all-tub average and its by-material averages are NEVER printed as clawfoot figures), Angi, 'How Much Does Bathtub Replacement Cost? [2026 Data]', updated Oct 20, 2026, 4,360 verified projects (all bathtubs national average $5,931, most $2,106–$9,758; by style standard $200–$800, soaking $600–$13,000, jet/whirlpool $1,000–$4,000, freestanding $2,000–$3,000 average $2,500, walk-in $4,000–$22,100, CLAWFOOT $10,000+ — 'a distinctive, high-end choice that can cost $10,000 or more, though options are available across a range of budgets'; labour to replace a bathtub $100–$2,000; plumber to move lines $400–$1,900; old tub removal $150–$4,500; subfloor prep and reinforcement $300–$800, floor joist repair $4,000–$12,000, subfloor replacement $3–$10/sq ft; faucets $50–$900; permits $10–$500; surround $500–$2,000; shower-to-tub conversion $2,000–$10,500; install 1–2 days; refinishing alternative ~$480 — its $5,931 all-tub average is NEVER printed as a clawfoot average, and its $10,000+ is the large-ornate scope, not the typical job), EngineerFix, 'How Much Does Clawfoot Tub Installation Cost?' (no visible date; new units ~$600 to over $7,000; acrylic $600–$1,400, cast iron $1,500–$7,000+; salvaged/vintage cast iron $300–$1,500; refinishing $300–$650, full restoration up to $1,800; hardware package $500–$1,000; floor-mounted faucets $150–over $2,200, tub/wall-mount $90–$950; plumbers $75–$150/hr, straightforward plumbing labour $700–$900; relocating drain and supply lines +$500–$1,600; weight empty cast iron 300–500 lbs, filled over 1,000 lbs; sistering joists $100–$300 per joist) and CostToRenovate, 'Clawfoot Tub Installation Cost in 2026' (cross-check only, compiled from Fixr 2025 — national $2,000–$5,500, average $3,500; tiers Budget $1,300 = materials $800 + labour $500 + permits $0, Mid-Range $3,100 = materials $2,000 + labour $1,000 + permits $100, Premium $6,850 = materials $4,500 + labour $2,000 + permits $150 + design $200; tub material $500–$4,000; acrylic 75–100 lbs; filled cast iron 500–800 lbs on its tub-plus-water scope; timeline fastest 1 day, typical 2–3 days, complex 1 week; DIY Difficult, savings 30–40% — its regional multipliers are its own BLS-based computation and are NOT printed). Synthesized typical = CostToRenovate's published national band at $2,000–$5,500, with $3,500 most-pay at its published national average (compiled from Fixr 2025, provenance labelled on the page). No materials % share, copper band or regional figures are published in any source read, so none is printed. Bathify, HomePros.blog and Bathtubber figures are not printed. Checked November 2026.. Sources last checked: October 2026 — Fixr, Angi. How we calculate these costs
Cost by scope

| Scope | Typical cost | What it includes |
|---|---|---|
| Budget — acrylic tub, basic chrome, existing plumbing | $1,300 | An acrylic clawfoot tub, basic chrome faucet, freestanding supply lines, a simple swap in the existing plumbing location. (CostToRenovate tier table: materials $800 + labour $500 + permits $0 = $1,300.) NOTE: $1,300 is a single-point tier total, not a band. EngineerFix corroboration: acrylic $600–$1,400 + hardware $500–$1,000 + straightforward labour $700–$900 = $1,800–$3,300 — the Budget tier sits at the bottom of that sum because it assumes the cheapest acrylic, basic chrome hardware and no plumbing moves. |
| Standard — cast iron tub, floor-mount faucet, drain relocation | $3,100 | A cast iron clawfoot tub, floor-mount faucet, exposed plumbing in brushed nickel, drain relocation. (CostToRenovate tier table: materials $2,000 + labour $1,000 + permits $100 = $3,100.) The $3,500 published average sits just above this tier. EngineerFix corroboration: cast iron $1,500–$7,000 + hardware $500–$1,000 + labour $700–$900 + relocation $500–$1,600 = $2,700–$8,900. |
| Premium — restored antique or designer cast iron | $6,850 | A restored antique or designer cast iron tub, custom plumbing, luxury floor-mount faucet, structural floor reinforcement. (CostToRenovate tier table: materials $4,500 + labour $2,000 + permits $150 + design $200 = $6,850.) Above it, Angi's $10,000+ large-ornate clawfoot scope and Fixr's $10,000 top end — carried as the high-end note, never as a fourth tier. |
Where the money goes
| Part of the job | Share | Note |
|---|---|---|
| Tub unit (new) | No published share | $600–$7,000+ (EngineerFix): acrylic $600–$1,400, standard size, rarely over $1,400; cast iron $1,500–$7,000 or more. Salvaged / vintage cast iron $300–$1,500 (EngineerFix). |
| Hardware package (faucet + drain + supply lines + shut-offs) | No published share | $500–$1,000 typically (EngineerFix). Floor-mounted / freestanding faucet alone $150–over $2,200 (the most expensive option); tub-mount and wall-mount faucets $90–$950. Premium finishes (brushed nickel, oil-rubbed bronze, polished brass) cost more than polished chrome. |
| Plumbing labour, straightforward | 20–50% of total | $700–$900 (EngineerFix, at $75–$150 per hour, drain lines already in the correct location). Labour is 20–50% of total cost (Fixr, all tub types) — the ONLY published % share on this page; it drives the estimator's note and the 'Prices vary most by' glance row. |
| Plumbing relocation (drain + supply lines moved) | No published share | $500–$1,600 (EngineerFix, more than a few feet — subfloor and wall-cavity modification). Angi prices a plumber moving lines at $400–$1,900 (all tub types). |
| Floor reinforcement | No published share | $100–$300 per joist (EngineerFix, sistering joists). Angi: subfloor prep and reinforcement $300–$800 (all tub types). A filled cast iron tub weighs over 1,000 lbs on four small feet (EngineerFix) — older homes and second-story bathrooms may need this line. |
| Old tub removal / disposal | No published share | $150–$4,500 (Angi); Fixr $200–$1,200. Fiberglass $50–$100 to remove; cast iron $300+ to haul; disposal alone $100–$4,200 (Angi). |
| Refinishing a salvaged cast iron tub | No published share | $300–$650 professionally; full restoration up to $1,800 (EngineerFix). |
| Permits | No published share | $10–$500 (Angi; plumbing $50–$500, electrical $10–$500). |
| Build-back after removing an alcove tub | No published share | $800–$3,000 (Fixr) — remove the old shower surround, install new tile and flooring where the tub was. Fixr: 'can add up to 50% to your tub installation costs.' |

What moves the price most
Worked example — CostToRenovate's published Mid-Range tier (not a contractor quote): materials $2,000 + labour $1,000 + permits $100 = $3,100. Cross-check: an EngineerFix acrylic job — tub $600–$1,400 + hardware $500–$1,000 + straightforward labour $700–$900 = $1,800–$3,300. By material — tub unit only (EngineerFix): acrylic $600–$1,400 (75–100 lbs, no floor reinforcement needed); cast iron, new $1,500–$7,000+ (300–500 lbs empty, 1,000+ lbs filled); salvaged / vintage cast iron $300–$1,500. CostToRenovate's own tub-material band is $500–$4,000 (compiled). Acrylic is the budget material because it is light and needs no reinforcement; cast iron is the premium material because it is heavy and holds heat. By type installed (Fixr): freestanding/clawfoot $1,200–$10,000. Angi's clawfoot style $10,000+ is the large-ornate / high-end scope, NOT the standard spec. Where sources disagree: the three bands are NOT three estimates of the same job — Fixr covers the full freestanding range from budget acrylic to premium cast iron; Angi prices large ornate/new clawfoot tubs; CostToRenovate is the compiled national band. Publish CostToRenovate's band as typical, Fixr's as the wide band, Angi's as the high-end scope. Most-pay: CostToRenovate's $3,500 (compiled from Fixr 2025) vs Fixr's $6,000 and Angi's $5,931 — the last two are ALL-tub averages and are NEVER printed as clawfoot averages. Weight: EngineerFix says a filled cast iron tub is over 1,000 lbs; CostToRenovate says 500–800 lbs — the gap is what 'filled' includes (water + bather + tub). Publish EngineerFix's 1,000+ lbs (empty 300–500 lbs) and note the lower figure as the tub-plus-water-only scope. Either way, floor reinforcement is a real line. Install time is scope, not contradiction: Fixr 6–8 hours (a straight tub swap), Angi 1–2 days (remove + replace), CostToRenovate 2–3 days typical (a full clawfoot job with rough-in), up to 1 week for complex jobs. Lifespan: cast iron nearly 100 years, acrylic 10–20 years (Fixr). DIY: rated Difficult (CostToRenovate) — plumbing rough-in, drain connections, floor reinforcement and floor-mount faucet installation are pro work. DIY savings of 30–40% come from removing the old tub, painting/refinishing the feet and sourcing the tub yourself. Cast iron tubs 'can cause injury or floor damage if dropped' (CostToRenovate). Labour share: Fixr publishes labour at 20–50% of total (all tub types) — the only published % share on this page. No materials % is published: CostToRenovate's tiers imply ~62–66% materials, Fixr's labour band implies 50–80% — the derivations do not agree, so no materials % is printed. Scope — what this page is not: a standard / alcove tub (Fixr: alcove $450–$1,400 installed — the cheapest tub job, and the one a clawfoot usually replaces); a built-in soaking tub (Angi: $600–$13,000); a modern freestanding tub, non-clawfoot (separate live page; Angi freestanding style $2,000–$3,000, average $2,500); a walk-in tub (separate live page, $4,000–$22,100, Angi); a jetted / whirlpool tub (separate live page; Angi $1,000–$4,000); bathtub refinishing as a headline price (separate live page, ~$480, Angi — refinishing a salvaged clawfoot at $300–$650 is a LINE inside this job); a shower-to-tub conversion (Angi: $2,000–$10,500); or a bathroom remodel (separate live page — a clawfoot tub is one fixture inside a remodel). Methodology: figures cross-checked across three independent data families — Fixr (updated Aug 29, 2025), Angi (updated Oct 20, 2026) and EngineerFix (clawfoot installation guide) — read in full on 2026-11-11, with CostToRenovate (compiled from Fixr 2025) as a cross-check for the published national band and average, its provenance labelled on the page. No copper/specialty clawfoot band and no regional figures are printed, because no source read in full publishes them. Related costs: bathtub replacement, freestanding tub installation, walk-in tub installation, bathtub refinishing, jetted tub installation, shower remodel, bathroom remodel and bathroom tile installation.
Costs in your city
Labor is the biggest variable in any remodel, and labor is local — the same bathroom can price very differently in Houston than in Boston. We are adding city editions metro by metro, each with its own labor index, permit notes and climate factors, written for that city rather than copied from this page. Wave 1: Houston, Dallas–Fort Worth, Phoenix, Atlanta, Miami–South Florida, Orlando, Tampa, Charlotte, Austin and San Antonio. Until your city's page is live, use the national range here and weight it the way contractors do: Sun Belt labor often prices near or below the national middle, while coastal California and the Northeast metros often price well above it.

Frequently asked questions
How much does it cost to install a clawfoot tub?
$2,000–$5,500 for most homeowners, with a national average of $3,500 (CostToRenovate, compiled from Fixr 2025 data). The full freestanding/clawfoot range is $1,200–$10,000 (Fixr), and large ornate new clawfoot tubs run $10,000+ (Angi). A budget acrylic job is about $1,300; a mid-range cast iron job about $3,100; a premium restored-antique job about $6,850 (CostToRenovate tiers).
Acrylic or cast iron — which clawfoot tub should I choose?
Acrylic ($600–$1,400) is light (75–100 lbs), affordable, retains heat well and needs no floor reinforcement — the budget choice and the safe choice for upper-floor bathrooms (EngineerFix; CostToRenovate). Cast iron ($1,500–$7,000+) is heavier, more durable, holds heat longer and feels more substantial — but at 300–500 lbs empty and 1,000+ lbs filled it may need floor reinforcement (EngineerFix). Restored antiques add refinishing ($300–$650) and can reach $1,800 for a full restoration.
Will my floor support a cast iron clawfoot tub?
Maybe not without work — that is the first question to ask your contractor. A filled cast iron tub weighs over 1,000 lbs on four small feet (EngineerFix). Older homes and second-story bathrooms may need joists sistered at $100–$300 per joist (EngineerFix), or subfloor prep and reinforcement at $300–$800 (Angi). If floor joists are compromised, repair runs $4,000–$12,000 (Angi) — a different job, not a tub line.
What does the faucet and plumbing cost on a clawfoot tub?
The hardware package (faucet, drain, supply lines, shut-offs) is typically $500–$1,000 (EngineerFix). A floor-mounted freestanding faucet is the expensive choice at $150–$2,200+; a tub- or wall-mount faucet is $90–$950 (EngineerFix). Straightforward plumbing labour is $700–$900; moving drain and supply lines adds $500–$1,600 (EngineerFix) — Angi prices a plumber moving lines at $400–$1,900.
How long does a clawfoot tub installation take — and can I DIY it?
Typically 2–3 days; 1 day at fastest, up to 1 week for complex jobs (CostToRenovate). Angi: remove and replace within 1–2 days. Fixr: 6–8 hours for a straight tub swap. DIY feasibility is rated Difficult (CostToRenovate): plumbing rough-in, drain connections, floor reinforcement and floor-mount faucet installation are pro work. DIY savings of 30–40% come from removing the old tub, painting/refinishing the feet and sourcing the tub yourself.
What does Angi's $10,000+ clawfoot figure actually mean?
It is the top of the range, not the typical job. Angi prices large, ornate, brand-new clawfoot tubs at $10,000 or more, and notes installation costs rise further with plumbing changes or floor reinforcement (Angi, updated Oct 20, 2026; same figure in its Jul 8, 2026 clawfoot guide). Fixr's full freestanding/clawfoot band tops out at the same $10,000. Most clawfoot jobs land at $2,000–$5,500 with a $3,500 average (CostToRenovate).






