Home › Cost Guides › Bathtub Refinishing
Cost Guide

How Much Does Bathtub Refinishing Cost? (2026)

By Ahsan ul Haq · Last updated: 11 November 2026 · Planning estimate — not a quote · How we estimate

Typical range
$350 – $630
Most homeowners pay around $480 · The typical project is a full professional refinish of a standard built-in tub — stripped, repaired, bonded and sprayed in place, ready to use in a day or two. A liner, an inlay and a full replacement are different projects: the replacement is priced on the bathtub replacement page, and liners are tiered as an alternative below, never blended into this band.
typical
$350$630
Low end = minor scope  ·  marker = typical middle  ·  high end = major scope. Add 10–20% contingency to any budget.
Large white jetted bathtub in a tiled bathroom with a vanity

Bathtub Refinishing cost at a glance

  • Typical range: $350 – $630
  • Most homeowners pay: around $480
  • Prices vary most by: Spray labor, masking & ventilation (30–40% of the budget)

Cross-checked against three published sources for this project. Sources used for this page: the Angi bathtub refinishing cost guide, HomeGuide's bathtub refinishing cost guide and Fixr's bathtub refinishing cost guide. Sources last checked: October 2026 — HomeGuide, Fixr, Angi. How we calculate these costs

Cost by scope

Bathtub Refinishing cost ranges by scope — chart of the table below
ScopeTypical costWhat it includes
Minor repair — inlay, chips or spot reglazing$100 – $350Angi prices a bathtub inlay at $100–$200 and reglazing at $280–$600, and Fixr notes a built-in fiberglass tub can refinish from about $250. This tier is small damage on a surface that is otherwise sound — one repair, not a new finish everywhere.
Full refinish of a standard tub — the typical job$350 – $630The typical project on this page. Angi averages $483 across 7,355 verified projects with most homeowners paying $337–$631; HomeGuide prices a standard bathtub at $350–$600; Fixr averages $480 with most projects between $350 and $650.
Clawfoot, tub-shower combo or heavy repair$600 – $1,400HomeGuide prices a freestanding or clawfoot tub at $400–$1,400 and a bathtub-shower combo at $800–$1,200 for its larger surface area; Angi prices combos at $600–$1,000 and clawfoot tubs at $400–$1,400; Fixr puts refinishing a tub and shower together at $500–$1,200.

Where the money goes

Part of the jobShareNote
Prep — strip, etch & sand20–30%The old finish is stripped, the surface etched and sanded so the new coating can bond — Fixr and HomeGuide both describe the same sequence, and both are blunt that the finish lives or dies on this invisible step
Chip, crack & rust repair10–20%Damage is filled and faired before any coating is sprayed: Fixr prices a tub with minor chips and discoloration at its $480 average, and $650 or more once surface damage and staining are extensive
Bonding agent & coating materials25–35%The professional two-part coatings are the material bill — Angi prices the material side by tub type from fiberglass at $300–$1,000 all-in to porcelain, cast iron and enamel at $350–$600, and DIY kits at $30–$150 show exactly what the pro-grade chemistry is worth
Spray labor, masking & ventilation30–40%Two to five hours of sprayed coats in a masked, ventilated bathroom in Angi and Fixr — skilled, smelly work that cannot be rushed, because runs and bubbles in coat one are permanent
Prep — strip, etch & sand · 20–30%Chip, crack & rust repair · 10–20%Bonding agent & coating materials · 25–35%Spray labor, masking & ventilation · 30–40%
Estimator’s note: on bathtub refinishing, spray labor, masking & ventilation is usually where quotes swing most (30–40% of a typical budget). Ask every contractor to itemize that line in writing — totals are only comparable when that part is.
Freestanding tubs expose every face to the spray gun — HomeGuide prices a standard built-in tub at $350–$600, while a tub-shower combination runs $800–$1,200 for its larger surface.
Freestanding tubs expose every face to the spray gun — HomeGuide prices a standard built-in tub at $350–$600, while a tub-shower combination runs $800–$1,200 for its larger surface.

What moves the price most

Material reprices the prep. Angi and HomeGuide agree on the ladder: porcelain, cast iron and enamel standard tubs refinish at $350–$600, acrylic at $400–$700 in HomeGuide, fiberglass anywhere from $350 to $1,000 because it flexes and needs careful repair, and antique porcelain at $500–$1,200 for specialist handling. Surface area is the second price — an inset tub exposes one outside face, a clawfoot exposes all of them, which is why HomeGuide’s clawfoot band runs to $1,400. Condition decides the repair line: Fixr holds its $480 average for minor chips and discoloration and goes to $650+ for extensive damage and staining. Colour is a quiet adder — standard white is the base price everywhere; a colour change is custom work. And the comparison that sells the job: Angi puts replacing a bathtub at a $5,700 average and Fixr at $5,000–$7,000, against $480 to refinish — refinishing is priced at under a tenth of replacement when the tub underneath is sound.

Work out your quantities: before you compare quotes, run your measurements through our free remodeling calculators (paint, tile, concrete and flooring) — each one shows its formula and runs entirely in your browser.

Worked example: how a typical bathtub refinishing budget breaks down

Take the typical job — a standard built-in tub with worn gloss, two small chips and light staining, refinished in place. Here is a realistic $480 version of that invoice, the average both Fixr and Angi publish: The budget below totals $480 — the "most homeowners pay around" figure from the top of this page — split using this page's own cost breakdown. It shows how a real quote at that level is usually composed; every line is built from the ranges on this page, and it is an illustration, not a quote for your project.

Line itemExample budget
Strip, etch and sand the old finish$120
Chip and rust repair$80
Bonding agent and coating materials$130
Spray labor, masking and ventilation$150
Total$480

What most people get wrong

  • Comparing the quote with a $60 DIY kit. Angi prices the kits at $30–$150 and is clear about what they buy: a shorter-lived finish with no repair stage. The professional price is mostly prep and sprayed two-part coatings, not mystery markup.
  • Using the tub too soon. Fresh coating needs its cure — 24 to 48 hours in Fixr, 48 hours in Angi's reglazing guidance. One early shower can wrinkle a finish that would otherwise have lasted a decade.
  • Refinishing a tub that moves. A fiberglass tub that flexes underfoot cracks any coating from beneath. If the floor of the tub gives when you step in, the honest spend is replacement — no refinisher's warranty survives a moving substrate.
  • Cleaning the new finish like the old one. Abrasive powders and bleach are what kill refinished surfaces first; all three sources tie the 10-to-15-year lifespan to gentle cleaners and no scouring pads.
A Florida homeowner with a pink 1960s cast-iron tub gets a $6,200 replacement quote that includes re-tiling the surround the demolition would destroy, and a $520 refinish quote in white. She takes the refinish. This is refinishing's best case and all three sources price it the same way: the tub underneath is cast iron and structurally perfect, only the colour and gloss have failed, and Angi's $5,700 replacement average never gets a chance to compete with a $480 average.

How this estimate was built

Cross-checked against the Angi bathtub refinishing cost guide (national average $483 across 7,355 verified projects, most homeowners paying $337–$631), HomeGuide's bathtub refinishing cost guide (standard tub $350–$600, clawfoot $400–$1,400, tub-shower combo $800–$1,200) and Fixr's bathtub refinishing guide (average $480, most projects $350–$650, replacement comparison $5,000–$7,000). The typical band published here is the overlap of the three most-homes ranges; the most-pay figure is the average two of the three datasets independently publish. Checked October 2026. Full method: How We Estimate Costs.

Clawfoot tubs sit at the top of the refinish ladder — $400–$1,400 in both HomeGuide and Angi, with antique porcelain needing specialist handling at $500–$1,200 in Angi.
Clawfoot tubs sit at the top of the refinish ladder — $400–$1,400 in both HomeGuide and Angi, with antique porcelain needing specialist handling at $500–$1,200 in Angi.

Frequently asked questions

How much does bathtub refinishing cost on average?

Fixr averages $480 and Angi averages $483 across 7,355 verified projects, with most homeowners paying $337–$631. HomeGuide prices a standard bathtub at $350–$600. Three datasets land on the same answer: budget about $480 for a standard tub in fair condition.

How long does a refinished bathtub last?

Ten to fifteen years is the figure Angi, HomeGuide and Fixr all publish for a professional refinish with proper care — Fixr adds that most finishes land at eight to ten years in real bathrooms, and that a tub can usually be refinished twice before replacement becomes the better spend.

Is refinishing worth it versus replacing the tub?

When the tub is structurally sound, the arithmetic is one-sided: about $480 to refinish against a $5,700 average replacement in Angi and $5,000–$7,000 in Fixr — HomeGuide puts the saving at nearly 75%. Replacement wins when the tub leaks, flexes, is rusted through, or is the wrong size or shape for the room; no coating fixes any of those.

How long before I can use the tub again?

The spraying itself takes two to five hours in Angi and Fixr. Angi’s reglazing guidance is ready to use after 48 hours, and Fixr gives 24 to 48 hours — plan on two days without the tub, and on ventilation during the work, because the coatings carry strong fumes while they cure.

Can a fiberglass or acrylic tub be refinished?

Yes — HomeGuide confirms fiberglass can be refinished once cracks are repaired, at $350–$1,000, and prices acrylic at $400–$700 with gentler handling because it is sensitive to heat and chemicals. Fiberglass that flexes underfoot is the exception: a moving floor cracks any coating, and that tub is a replacement conversation instead.

Before you sign: Sound tub, tired finish, 48 patient hours — that is the whole decision.

Ahsan ul Haq — Editor, Remodel Cost Hub

Ahsan compiles and edits the cost guides on Remodel Cost Hub, cross-checking every range against at least three published sources before it is published — the full method is on our Methodology page. Spot an error on this page? Send a correction.

Bathtub Refinishing cost range graphic
Save this range for later: Pin it on Pinterest

Related cost guides

Black and white checkered tile floor with visible grout lines and ground-in grime

Tile and Grout Cleaning Cost

$285 – $675

The typical project is a professional machine clean of the main tiled areas of a home — kitchen, bathrooms and entry — at about $0.50 – $3 per sq ft in Angi. A single small bathroom, grout sealing and damaged tile are tiered or noted separately below; new tile is priced on the tile flooring page.

Kitchen cabinets finished in deep blue paint with patterned tile backsplash

Cabinet Painting Cost

$1,000 – $6,500

Professional cabinet painting, average kitchen — about $30–$70 per linear foot across the published guides

Glass-enclosed tiled shower with a rain showerhead and a handheld showerhead

Shower Repair Cost

$150 – $750

A shower repair typically costs $150 – $750, with about $400 the most-pay figure — Modernize puts most shower repairs in that $150–$750 band with many common jobs at $300–$500, Angi prices fixing a bathroom leak at $150–$600, and HomeAdvisor prices shower or tub faucet repair at $75–$200. The $400 most-pay figure sits inside Modernize's common-jobs band; small drip and clog jobs land below the band and pan, tile or behind-wall work lands above it.

Large jetted garden bathtub set into a tiled deck under a glass-block window

Bathtub Repair Cost

$100 – $600

A bathtub repair typically costs $100 – $600, with about $300 the most-pay figure — HomeGuide puts surface repairs at $100–$600 on average, Angi prices a chipped bathtub repair at $195–$300, and This Old House prices refinishing at $335–$630 with a $480 national average. The $300 most-pay figure sits at the top of the chip-repair band and inside the surface band; a recaulk or single chip lands below it and a full refinish or plumbing repair lands above it.

Bathroom vanity with a white countertop and black faucet, toilet and alcove tub alongside

Sink Repair Cost

$100 – $500

A sink repair typically costs $100 – $500, with about $300 the most-pay figure — HomeGuide puts plumber sink repairs at $100–$500 for minor issues and up to $800+ for large resurfacing or pipe jobs, Angi prices plumbing repair at $330 on average and sink install or repair at $200–$1,500, and Thumbtack prices common sink jobs at $65–$400. The $300 most-pay figure sits near Angi's $330 plumbing-repair average; a drip or clog lands below it and a surface refinish or hidden pipe job lands above it.

Modern kitchen with a wood countertop run along the back wall and a dining table in front

Countertop Repair Cost

$200 – $800

A countertop repair typically costs $200 – $800, with about $400 the most-pay figure — HomeGuide puts countertop repair at $200–$800+ total, Angi puts most countertop repairs at about $378 inside its $100–$1,000 band, and Fixr prices most repair types at $100–$500. The $400 most-pay figure sits just above Angi's $378 average; a single chip or scratch lands below it and a granite or marble crack, a resurface or a refinish lands above it.