Home › Cost Guides › Chimney Sweeping
Cost Guide

How Much Does Chimney Sweeping Cost? (2026)

By Ahsan ul Haq · Last updated: 11 November 2026 · Planning estimate — not a quote · How we estimate

Typical range
$150 – $375
Most homeowners pay around $260 · The typical project is a professional sweep of one wood-burning fireplace flue with a Level 1 inspection — brushes and a vacuum through the flue, the firebox and smoke shelf cleaned, and a written condition check. Gas fireplaces, second flues and Level 2 camera inspections are tiered separately below; repairs the sweep finds, like caps and liners, are priced as their own lines, never folded into the sweep.
typical
$150$375
Low end = minor scope  ·  marker = typical middle  ·  high end = major scope. Add 10–20% contingency to any budget.
Living room with a lit brick fireplace, mantel and hearth, sofas around a coffee table

Chimney Sweeping cost at a glance

  • Typical range: $150 – $375
  • Most homeowners pay: around $260
  • Prices vary most by: Sweeping labor — brushes, rods & vacuum (55–70% of the budget)

Cross-checked against three published sources for this project. Sources used for this page: the Angi chimney sweep cost guide, HomeGuide's chimney sweep cost guide and Fixr's chimney cleaning cost guide. Sources last checked: October 2026 — HomeGuide, Fixr, Angi. How we calculate these costs

Cost by scope

Chimney Sweeping cost ranges by scope — chart of the table below
ScopeTypical costWhat it includes
Gas fireplace or prefab chimney sweep$80 – $175The light end of both datasets: HomeGuide prices a gas fireplace at $80–$150 and a prefabricated chimney at $90–$175, each including a Level 1 inspection. Gas burns clean, so the visit is mostly inspection and a light brush pass.
Wood-burning fireplace, one flue — the typical job$150 – $375The typical project on this page. HomeGuide averages $275 inside $150–$375 for a masonry wood-burning chimney; Angi averages $254 across 19,349 verified projects with most homeowners paying $129–$381. Creosote stage decides where in the band a given flue lands.
Level 2 camera inspection, extra flues or heavy creosote$300 – $600Fixr averages about $400 for a Level 2 inspection and cleaning of a wood stove chimney inside a $100–$500 overall band, and a Level 2 scan is the standard when a home is sold, an appliance changes, or a chimney fire is suspected. Glazed Stage 3 creosote needs chemical treatment and a return visit, not just a harder brush.

Where the money goes

Part of the jobShareNote
Sweeping labor — brushes, rods & vacuum55–70%The certified sweep and the hour the work takes: rods and brushes up the flue, the smoke shelf and firebox cleaned, and every bit of soot captured by the vacuum rather than your living room
Level 1 inspection & condition check15–25%The visual inspection bundled into the visit in both Angi and HomeGuide — damper, firebox, visible flue and crown checked, with the findings that decide whether a Level 2 camera scan is warranted
Soot & creosote disposal5–10%Bagging and removing the swept deposits; heavy or glazed creosote raises this line and can add a chemical treatment pass priced separately
Travel, setup & protection8–15%Drop cloths, hearth protection and the drive — the fixed cost inside every visit, and the reason a second flue swept on the same trip costs a fraction of a second visit
Sweeping labor — brushes, rods & vacuum · 55–70%Level 1 inspection & condition check · 15–25%Soot & creosote disposal · 5–10%Travel, setup & protection · 8–15%
Estimator’s note: on chimney sweeping, sweeping labor — brushes, rods & vacuum is usually where quotes swing most (55–70% of a typical budget). Ask every contractor to itemize that line in writing — totals are only comparable when that part is.
Two stacks usually means two flues — the second flue swept on the same visit costs a fraction of a separate trip, because travel and setup are already paid.
Two stacks usually means two flues — the second flue swept on the same visit costs a fraction of a separate trip, because travel and setup are already paid.

What moves the price most

Fuel type sets the baseline. HomeGuide prices gas at $80–$150 against $150–$375 for a wood-burning masonry chimney, with wood and pellet stoves at $130–$300 — wood smoke lays down creosote, gas mostly does not. Creosote stage is the multiplier: powdery Stage 1 brushes out in the standard visit; crunchy Stage 2 takes longer; glazed Stage 3 needs chemical treatment before it will release, and no honest sweep quotes it sight-unseen. Inspection level is a separate product — Level 1 is bundled into the sweep in Angi and HomeGuide, while the Level 2 camera scan that home sales and appliance changes require runs to Fixr's roughly $400 average for inspection and cleaning together. Flue count and roof access price the trip: each extra flue is a partial add, not a second visit, and steep or high roofs slow the top-down half of the work. Time since the last sweep shows up in the quote — annual wood burners are the cheapest flues in the book, and a decade of buildup is priced like the work it is.

Work out your quantities: before you compare quotes, run your measurements through our free remodeling calculators (paint, tile, concrete and flooring) — each one shows its formula and runs entirely in your browser.

Worked example: how a typical chimney sweeping budget breaks down

Take the typical job — one wood-burning masonry fireplace, swept from the hearth with a Level 1 inspection, light Stage 1–2 creosote, soot vacuumed and bagged. Here is a realistic $260 version of that invoice, between Angi's $254 and HomeGuide's $275 averages: The budget below totals $260 — the "most homeowners pay around" figure from the top of this page — split using this page's own cost breakdown. It shows how a real quote at that level is usually composed; every line is built from the ranges on this page, and it is an illustration, not a quote for your project.

Line itemExample budget
Sweeping labor — flue, smoke shelf & firebox$170
Level 1 inspection & written condition check$55
Drop cloths, vacuum capture & soot disposal$35
Total$260

What most people get wrong

  • Comparing a bare sweep with a sweep-and-inspection. The Level 1 inspection is bundled into the standard visit in both Angi and HomeGuide — a cheaper quote that skips it is selling half the product, and it is the half that finds cracked flue tiles.
  • Booking a Level 1 when the sale needs a Level 2. Home sales, appliance changes and post-fire checks require the camera scan — Fixr averages about $400 for Level 2 inspection and cleaning — and a Level 1 report will not satisfy a buyer or an insurer.
  • Expecting glazed creosote to brush out. Stage 3 glaze needs chemical treatment and often a second visit; a sweep who promises to brush it clean in the standard hour is promising something the deposit does not allow.
  • Skipping years because the fireplace is 'barely used'. Nests, debris and damp enter an idle flue as readily as a busy one — the annual inspection is the cheap year, the relining quote is the expensive one.

Costs in your city

Chimney sweeping is a short, skilled visit, so its price tracks local labor and housing stock more than materials. Older housing regions with masonry chimneys in every street have competitive sweep markets and the $150 floor of HomeGuide's band is realistic there; areas where wood heat is a lifestyle extra rather than a staple have fewer sweeps and longer drives priced in. Fall is the peak everywhere — the same sweep booked in spring, after the burning season, is easier to schedule and sometimes cheaper. What does not change by city is the structure: fuel type sets the baseline, creosote stage sets the work, and the inspection level sets the product you are actually buying.

How we got these numbers

Cross-checked against the Angi chimney sweep cost guide (average $254 across 19,349 verified projects, most homeowners paying $129–$381), HomeGuide's chimney sweep cost guide ($150–$375 average, national average $275, gas $80–$150, prefab $90–$175) and Fixr's chimney cleaning cost guide ($100–$500, average about $400 for a Level 2 inspection and cleaning). Where the three disagree, this page publishes the overlap and says so.

Every wood fire lays creosote on the flue walls above the firebox — powdery at first, then crunchy, then a glazed coating that a standard brush will not shift.
Every wood fire lays creosote on the flue walls above the firebox — powdery at first, then crunchy, then a glazed coating that a standard brush will not shift.

Frequently asked questions

How much does a chimney sweep cost on average?

Angi averages $254 across 19,349 verified projects, with most homeowners paying $129–$381, and HomeGuide averages $275 inside $150–$375. Budget about $260 for one wood-burning fireplace swept with a Level 1 inspection.

How often should a chimney be swept?

Inspected every year, and swept when the inspection finds about 1/8 inch of sooty buildup or any glazed creosote. Regular wood burners land on an annual sweep in practice; a fireplace used a few times a winter may go longer between sweeps but not between inspections.

What is the difference between a Level 1 and Level 2 inspection?

Level 1 is the visual check of accessible parts, bundled into a standard sweep in both Angi and HomeGuide. Level 2 adds a camera scan of the flue interior and is required when a home is sold, a new appliance is fitted, or damage is suspected — Fixr averages about $400 for a Level 2 inspection and cleaning together.

How much does it cost to sweep a gas fireplace chimney?

Less — HomeGuide prices a gas fireplace at $80–$150 and a prefabricated chimney at $90–$175, inspection included. Gas leaves little deposit, so most of the visit is the safety inspection rather than the brushing.

Can I sweep my own chimney?

Brush kits exist, and a straight, short flue can be brushed from the roof or the hearth. What DIY cannot give you is the inspection half of the visit — the cracked tile, failed damper or glazed creosote a sweep is trained to spot — which is where most of the value of the $260 visit actually sits.

Before you sign: Fuel, creosote, inspection level — a fair sweep quote names all three, and the $260 middle of the market is one wood-burning flue, swept and inspected.

Ahsan ul Haq — Editor, Remodel Cost Hub

Ahsan compiles and edits the cost guides on Remodel Cost Hub, cross-checking every range against at least three published sources before it is published — the full method is on our Methodology page. Spot an error on this page? Send a correction.

Chimney Sweeping cost range graphic
Save this range for later: Pin it on Pinterest

Related cost guides

Laundry room with a white washer and dryer pair under wooden cabinets

Dryer Vent Cleaning Cost

$100 – $185

The typical project is a professional cleaning of one residential dryer vent run — the dryer pulled out, the full duct brushed and vacuumed from the machine to the exterior hood, and airflow checked at the exit. Roof-exit vents, bird nests and vent rerouting are tiered separately below; a new vent installation is different work and is priced in the FAQs, not folded into a cleaning.

Woman sorting laundry in front of a stacked washer and dryer with its drum open

Dryer Vent Installation Cost

$200 – $600

Dryer vent installation typically costs $200 – $600 for a standard new vent through an exterior wall, with about $350 the figure most standard jobs land near — Angi's national average is $200 inside its $140–$600 band, and HomeGuide prices a new outdoor vent at $200–$800. This guide prices a new rigid-metal duct run to the outside, not a cleaning and not an indoor vent box.

Chrome kitchen faucet dripping slowly into a stainless steel sink

Drain Cleaning Cost

$150 – $350

The typical project is a professional snaking of one clogged household drain — a kitchen sink, bathroom sink, tub or toilet — with the auger run to the clog, the line flushed and flow tested before the plumber leaves. Main-line stoppages and hydro jetting are tiered separately below; a full repipe or a sewer replacement is different work, priced on the plumbing-repipe page and in the FAQs, never folded into a cleaning.

Worker in hi-vis pressure washing stone steps, spray visible

Hydro Jetting Cost

$350 – $600

A standard professional hydro jetting visit for a clogged sewer line — high-pressure water scouring the pipe wall clean, not just punching a hole through the clog

Pest control worker in a red uniform and helmet fogging a yard beside a fence

Pest Control Cost

$150 – $300

The typical project on this page is one professional general pest control visit — inspection and pest identification, interior baseboard and exterior perimeter treatment, entry points spot-treated, and a written report with a re-service window. Recurring plans are tiered separately below; bed bug heat treatments and termite work are different products with their own price class, named in the tiers and FAQs rather than folded into a general visit.

Pest control worker in red protective gear fogging outside a house

Termite Treatment Cost

$250 – $1,000

Termite treatment typically costs $250 – $1,000 for a standard treatment, with about $621 the figure most jobs land near — Angi's 2026 national average is $621 inside its $263–$1,033 most-pay band, and HomeGuide prices chemical or bait treatments at $225–$2,500 per treatment. This guide prices treatment of an existing infestation — inspection, application and follow-up — not damage repair, which Angi prices separately at $250–$6,000.