Chandelier Installation cost at a glance
- Typical range: $350 – $1,250
- Most homeowners pay: around $500
Cross-checked against two published sources for this project. Sources used for this page: Angi's chandelier installation cost guide (updated October 16, 2026: national average $500, most $350–$1,250, fixture $100–$500, supplies $10–$50, tools $10–$30, labor $200–$1,200, permits $50–$500, electrician $50–$200/hr, carpenter $35–$100/hr, small $50–$400, medium $100–$1,200, large $300–$5,000+, over-30-pound reinforcement rule, hang heights 30–34 inches over a table and 7 feet from the floor), HomeGuide's chandelier installation cost guide (total $220–$3,400, replacement labor $100–$350, new-installation labor $200–$2,000, standard 5-light $120–$300, crystal $220–$1,400, tiered $170–$700, shaded $120–$400, antler $250–$1,000, 2–4 hours) and the modern-chandelier installation cost guide (replacement $150–$350, new installation $350–$1,250, hang labor $100–$400, high-ceiling/heavy hang $200–$800+, support box $50–$150, bracing $150–$400, independent support $300–$700+). Sources last checked: October 2026 — HomeGuide, Angi. How we calculate these costs
Cost by scope

| Scope | Typical cost | What it includes |
|---|---|---|
| Replacement on existing wiring | $100 – $350 | The small tier: HomeGuide's replacement-labor band, inside the modern-chandelier guide's $150–$350 replacement band |
| Standard job — the typical band | $350 – $1,250 | The shared band itself: Angi's most-pay band, national average $500, inside the modern-chandelier guide's $350–$1,250 new-installation band |
| New location, heavy fixture, high ceiling | $200 – $2,000 labor, up to $3,400 total | The expensive end: HomeGuide's new-installation labor band and $220–$3,400 total, with support work and access equipment on top |
Where the money goes
| Part of the job | Share | Note |
|---|---|---|
| Chandelier, fixture only | $100 – $500 | Angi's fixture band; HomeGuide prices standard fixtures at $120–$1,400 by type |
| Standard 5-light chandelier, fixture | $120 – $300 | HomeGuide's cheapest fixture type |
| Crystal chandelier, fixture | $220 – $1,400 | HomeGuide's crystal fixture band; luxury crystal can exceed $10,000 by designer |
| Tiered chandelier, fixture | $170 – $700 | HomeGuide's tiered fixture band |
| Shaded chandelier, fixture | $120 – $400 | HomeGuide's shaded fixture band |
| Antler chandelier, fixture | $250 – $1,000 | HomeGuide's antler fixture band |
| Small chandelier, fixture | $50 – $400 | Angi's small-fixture band |
| Medium chandelier, fixture | $100 – $1,200 | Angi's standard-fixture band |
| Large chandelier, fixture | $300 – $5,000+ | Angi's large-fixture band for foyers and extra-large dining rooms |
| Supplies | $10 – $50 | Angi's supplies band for a chandelier job |
| Tools | $10 – $30 | Angi's tools band for a chandelier job |
| Labor, total | $200 – $1,200 | Angi's labor band for a chandelier installation |
| Electrician, hourly | $50 – $200 | Angi's electrician band for chandelier work |
| Carpenter, hourly | $35 – $100 | Angi's carpenter band for attachment-site reinforcement |
| Replacement labor | $100 – $350 | HomeGuide's labor-only band for replacing an existing chandelier |
| New-installation labor | $200 – $2,000 | HomeGuide's labor-only band for installing where no fixture existed |
| Total installed, HomeGuide | $220 – $3,400 | HomeGuide's total band including fixture and labor, 2–4 hours of work |
| Replacement total, HomeGuide fixture guide | $220 – $1,750 | HomeGuide's replacement total from its light-fixture replacement guide |
| Replacement, modern-chandelier guide | $150 – $350 | The modern-chandelier guide's replacement band, 1–1.5 hours on a standard ceiling |
| New installation, modern-chandelier guide | $350 – $1,250 | The modern-chandelier guide's new-installation band, matching Angi's most-pay band |
| Hang labor only, modern-chandelier guide | $100 – $400 | The modern-chandelier guide's labor-only hang band, 30–90 minutes on a standard ceiling |
| High-ceiling / heavy hang labor | $200 – $800+ | The modern-chandelier guide's band for high ceilings or heavy fixtures, access equipment included |
| Support box upgrade | $50 – $150 | The modern-chandelier guide's band for a support-box upgrade; Angi prices a box at $2–$40 per screw set |
| Bracing | $150 – $400 | The modern-chandelier guide's band for added ceiling bracing |
| Independent ceiling support | $300 – $700+ | The modern-chandelier guide's band for engineered support on very heavy fixtures |
| Permits | $50 – $500 | Angi's permit band in its cost table; its text prices new-wiring permits at $30–$300 |
| Scaffolding rental, 10-foot, 4 hours | $40 | Angi's rental band for a 10-foot scaffold for high-ceiling DIY work |
| Scaffolding rental, 20-foot, 4 hours | $70 | Angi's rental band for a 20-foot scaffold for high-ceiling DIY work |
| DIY swap, existing fixture | $100 | Angi's floor for a DIY chandelier swap on an existing fixture, saving $200+ in labor |
| New light switch add-on | $100 – $200 | Angi's add-on band for a switch with a new chandelier |
| New light fixture add-on | $150 – $950 | Angi's add-on band for an additional fixture roughed in on the same visit |

What moves the price most
Size and weight are the first drivers (Angi, HomeGuide): a small fixture at $50–$400 against medium at $100–$1,200 and large at $300–$5,000+ (Angi), and a fixture over 30 pounds needs structural reinforcement at the attachment site (Angi) — over 50 pounds needs a fan-rated support box, and over 150 pounds engineered support (modern-chandelier guide). Location and wiring are second: replacement labor at $100–$350 against new-installation labor at $200–$2,000 (HomeGuide), because new wiring needs a permit ($50–$500, Angi) and often a new switch at $100–$200. Ceiling height is third: a standard 8–9 foot ceiling keeps the hang at 30–34 inches over a table or 7 feet from the floor (Angi), while a high or vaulted ceiling pushes hang labor to $200–$800+ (modern-chandelier guide) plus scaffold rental. Labor mix closes the bill: electricians at $50–$200 an hour and carpenters at $35–$100 (Angi) on the same job when reinforcement is needed.
Costs in your city
Labor is the biggest variable in any remodel, and labor is local — the same bathroom can price very differently in Houston than in Boston. We are adding city editions metro by metro, each with its own labor index, permit notes and climate factors, written for that city rather than copied from this page. Wave 1: Houston, Dallas–Fort Worth, Phoenix, Atlanta, Miami–South Florida, Orlando, Tampa, Charlotte, Austin and San Antonio. Until your city's page is live, use the national range here and weight it the way contractors do: Sun Belt labor often prices near or below the national middle, while coastal California and the Northeast metros often price well above it.

Frequently asked questions
How much does chandelier installation cost?
Typically $350–$1,250, with about $500 the most-pay figure. Angi's 2026 guide puts the national average at $500, most homeowners spending $350–$1,250 — HomeGuide's $220–$3,400 total is wider because it separates replacement labor ($100–$350) from new-installation labor ($200–$2,000), published as-is rather than averaged away.
Is replacing a chandelier cheaper than installing a new one?
Yes — replacement labor runs $100–$350 (HomeGuide) or $150–$350 (modern-chandelier guide) because the wiring and support already exist, against $200–$2,000 labor for a new location (HomeGuide).
Does a heavy chandelier need extra ceiling support?
Over 30 pounds, yes — Angi requires reinforcement at the attachment site, the modern-chandelier guide prices a support-box upgrade at $50–$150 and bracing at $150–$400, and fixtures over 150 pounds need engineered support at $300–$700+.
How high should a chandelier hang?
30–34 inches above a dining table on a standard 8–9 foot ceiling, and 7 feet from the floor in living areas, bedrooms and foyers (Angi); high or vaulted ceilings raise those heights to 36–44 inches over a table and 8–9 feet from the floor.
Can I install a chandelier myself?
A straight swap on an existing fixture is a realistic DIY job at about $100 in parts (Angi) with a ladder, screwdriver, voltage tester and about two hours — but new wiring, a high site or a heavy fixture is electrician work, and new wiring usually requires a permit ($30–$300, Angi).






