Outdoor Faucet Installation cost at a glance
- Typical range: $150 – $500
- Most homeowners pay: around $325
Cross-checked against three published sources for this project. Sources used for this page: Angi's outdoor spigot guides (new install $100–$4,000, replacement $100–$300, standard $120–$250, frost-free $180–$350, decorative $200–$400, large $250–$500, multiple $200–$450 per spigot, faucet $10–$60, labor $150–$300 per hour, permits $25–$100 and inspections $50–$150, lifespan 10–20 years), HomeGuide's hose bib replacement cost guide (replacement $150–$350, materials $10–$40, labor $140–$310, advanced and anti-frost/anti-siphon $150–$450 installed, anti-frost parts $40–$100 or $250–$450 installed, plumber $75–$150 per hour, PEX $0.40–$2.00 per sq ft, trenching $5–$12 per linear foot, simple swap 10–20 minutes, lifespan about 20 years) and LawnLove's outdoor spigot installation guide (median $325, typical $150–$500, low $100, high $4,000, labor $140–$380, materials $10–$100, hose bib and ball valve $150–$300, yard hydrant/outdoor sink/shower $50–$1,000). Sources last checked: October 2026 — HomeGuide, Angi, LawnLove. How we calculate these costs
Cost by scope

| Scope | Typical cost | What it includes |
|---|---|---|
| Like-for-like replacement | $100 – $300 | The cheap end: Angi's replacement band for an existing hose bib or spigot, and HomeGuide's $150–$350 replacement band sits inside the same territory |
| Standard install — the typical band | $150 – $500 | The typical band itself: LawnLove's $150–$500 typical range with a $325 median, covering a standard spigot installed by a pro |
| Frost-free, new line or premium setup | $500 – $4,000 | Above the typical band: HomeGuide's anti-frost and anti-siphon models at $250–$450 installed, yard hydrants and outdoor sinks or showers at $50–$1,000 in materials (LawnLove), and Angi's $4,000 ceiling where extensive new plumbing is needed |
Where the money goes
| Part of the job | Share | Note |
|---|---|---|
| Replacement, Angi | $100 – $300 | Angi's band to replace an existing hose bib or spigot |
| New install, Angi | $100 – $4,000 | Angi's band to install a new outdoor faucet, from a simple bib to extensive new plumbing |
| Hose bib replacement, HomeGuide | $150 – $350 | HomeGuide's replacement band depending on material and local labor rates |
| Materials, HomeGuide | $10 – $40 | HomeGuide's materials band for the hose bib itself |
| Labor, HomeGuide | $140 – $310 | HomeGuide's labor band inside a hose bib replacement |
| Advanced or anti-frost spigots, HomeGuide | $150 – $450 | HomeGuide's installed band for other kinds of outdoor spigots |
| Anti-frost or anti-siphon features, HomeGuide | $250 – $450 | HomeGuide's installed band for hose bibs and spigots with anti-frost or anti-siphon features; parts alone $40–$100 |
| Plumber labor per hour, HomeGuide | $75 – $150 | HomeGuide's hourly band for replacing a hose bib |
| Typical install, LawnLove | $150 – $500 | LawnLove's typical price range for a spigot installation, labor included |
| Median install, LawnLove | $325 | LawnLove's median cost for a spigot installation |
| Labor, LawnLove | $140 – $380 | LawnLove's labor band inside a spigot installation |
| Materials, LawnLove | $10 – $100 | LawnLove's materials band for a simple spigot |
| Standard hose bibb, Angi | $120 – $250 | Angi's replacement band for a standard 1/2-inch or 3/4-inch hose bibb |
| Frost-free spigot, Angi | $180 – $350 | Angi's replacement band for a frost-free spigot with an extended stem |
| Decorative spigot, Angi | $200 – $400 | Angi's replacement band for an ornamental finish or specialty shape |
| Large hose bibb, Angi | $250 – $500 | Angi's replacement band for an oversized or commercial-grade bibb |
| Multiple spigots, Angi | $200 – $450 | Angi's per-spigot band when two or more are replaced at the same property |
| Faucet only, Angi | $10 – $60 | Angi's band for the faucet itself |
| Plumber labor per hour, Angi | $150 – $300 | Angi's hourly band for professional installation, most jobs taking a few hours |
| Hose bib or ball valve, LawnLove | $150 – $300 | LawnLove's installed band for the two most common spigot types |
| Yard hydrant, outdoor sink or shower, LawnLove | $50 – $1,000 | LawnLove's materials band for the expensive options beyond a simple spigot |
| Permit, Angi | $25 – $100 | Angi's permit band for an outdoor spigot replacement |
| Inspection, Angi | $50 – $150 | Angi's inspection band on top of the permit where inspections apply |
| Simple swap time, HomeGuide | 10 – 20 minutes | HomeGuide's time for a simple hose bib replacement; complications or rerouting can take several hours |
| Washer-only DIY fix, HomeGuide | $5 – $10 | HomeGuide's band for replacing a rubber washer to fix a leak, instead of replacing the bib |
| PEX piping, HomeGuide | $0.40 – $2.00 | HomeGuide's per-sq-ft band for plastic PEX piping where plumbing is replaced |
| Trenching, HomeGuide | $5 – $12 | HomeGuide's per-linear-foot band if plumbing runs underground |
| Lifespan, Angi / HomeGuide | 10 – 30 years | Angi puts most standard spigots at 10–20 years; HomeGuide puts hose bibs at about 20 years, lower-quality plastic as low as 10 and higher-end models at 30 or more |
| Wall or siding repair if a leak damaged it, HomeGuide | $2 – $14 | HomeGuide's per-sq-ft band for siding repair, and mold remediation at $15–$30 per sq ft, where a leaking bib damaged the wall |

What moves the price most
New versus replacement is the first driver (Angi): a standard swap runs $100–$300, while a brand-new faucet on a new line runs $100–$4,000 depending on how much plumbing the new location needs. Type is second: a standard bibb at $120–$250 against a frost-free model at $180–$350 and a decorative or large bibb at $200–$500 (Angi), with HomeGuide pricing anti-frost and anti-siphon features at $250–$450 installed. Distance and access are third: a spigot far from the house supply needs new pipe and sometimes trenching at $5–$12 per linear foot (HomeGuide), and a location in a basement, garage or crawl space costs more than one on the front or back wall (Angi). Labor rates close the bill: plumbers at $75–$150 per hour (HomeGuide) to $150–$300 per hour (Angi), with most simple swaps taking under a few hours.
Costs in your city
Labor is the biggest variable in any remodel, and labor is local — the same bathroom can price very differently in Houston than in Boston. We are adding city editions metro by metro, each with its own labor index, permit notes and climate factors, written for that city rather than copied from this page. Wave 1: Houston, Dallas–Fort Worth, Phoenix, Atlanta, Miami–South Florida, Orlando, Tampa, Charlotte, Austin and San Antonio. Until your city's page is live, use the national range here and weight it the way contractors do: Sun Belt labor often prices near or below the national middle, while coastal California and the Northeast metros often price well above it.

Frequently asked questions
How much does outdoor faucet installation cost?
Typically $150–$500, with about $325 the most-pay figure. LawnLove's typical range is $150–$500 with a $325 median, HomeGuide's hose bib replacement runs $150–$350, and Angi's replacement band is $100–$300 — a brand-new faucet on a new water line is a different job, running $100–$4,000 in Angi's guide.
Is it cheaper to replace or install a new outdoor faucet?
Replacing is cheaper: a standard swap runs $100–$300 (Angi) or $150–$350 (HomeGuide), while a new location needs new pipe, possibly trenching at $5–$12 per linear foot (HomeGuide), and can reach $4,000 where extensive plumbing is involved (Angi).
Is a frost-free hose bib worth it?
In cold climates, yes: a frost-free spigot extends farther into the wall so the shut-off sits inside the warm space (HomeGuide), running $180–$350 to replace (Angi) or $250–$450 installed with anti-frost features (HomeGuide) — against $120–$250 for a standard bibb (Angi). In mild climates a standard bibb is enough.
Can I install an outdoor faucet myself?
A like-for-like swap is a common DIY job — Angi's own guide puts a simple replacement at 20 minutes with basic tools, and HomeGuide prices a washer-only leak fix at $5–$10 — but moving the location, rerouting pipes or soldering is plumber work, and a mistake behind the wall means water damage.
How long does an outdoor faucet last?
About 20 years on average (HomeGuide), with Angi putting most standard spigots at 10–20 years — lower-quality plastic faucets may last only 10 years, while higher-end models can reach 30 years or more.
Do I need a permit to install an outdoor faucet?
Sometimes: Angi puts permit fees at $25–$100 with inspections at $50–$150 where they apply, and HomeGuide notes some cities require a permit for plumbing work — the plumber usually handles it, but it adds to the total.






