Home › Cost Guides › Range Installation
Cost Guide

How Much Does a Range Installation Cost? (2026)

By Ahsan ul Haq · Last updated: 11 November 2026 · Planning estimate — not a quote · How we estimate

Typical range
$100 – $300
Most homeowners pay around $200 · A standard freestanding range installed where a range already stood — gas or 240V electric hookup in place — installation labor only, the range priced separately
typical
$100$300
Low end = minor scope  ·  marker = typical middle  ·  high end = major scope. Add 10–20% contingency to any budget.
White kitchen with a freestanding white gas range with black burners under its hood, sink and stainless dishwasher to the right

Range Installation cost at a glance

  • Typical range: $100 – $300
  • Most homeowners pay: around $200
  • Prices vary most by: Installation labor (50–70% of the budget)

Cross-checked against three published sources for this project. Sources used for this page: Angi's stove vs oven vs range guide, updated March 6, 2026 (range installation about $1,500 on average including the appliance; electric range $600–$1,300, gas range $300–$1,000; a wall oven $1,200–$2,600 installed), HomeGuide's appliance installation cost guide (range installation labor $100–$300 with existing connections; units $600–$1,300; a new dedicated circuit $250–$900; permits for new plumbing or electrical lines $50–$300), Thumbtack's 2026 appliance installation cost data (national average $131–$270, most pay about $187; a slide-in electric range among the cheapest appliance installs), Yale Appliance's 2026 appliance installation cost guide (gas and pro ranges $349–$499 to install; average install about $425 without modifications) and Kukun's kitchen appliance installation cost estimator (stove and range installation $100–$200). Synthesized typical = the HomeGuide labor band at $100–$300, with $200 most-pay at Angi's appliance-installation average. Checked November 2026.. Sources last checked: October 2026 — HomeGuide, Angi, Thumbtack. How we calculate these costs

Cost by scope

Range Installation cost ranges by scope — chart of the table below
ScopeTypical costWhat it includes
Budget — electric slide-in swap, existing 240V$100 – $200Kukun prices stove and range installation at $100–$200, and Thumbtack notes a slide-in electric range is among the cheapest appliance installs.
Standard — gas or electric, existing hookups$100 – $300The typical project on this page: HomeGuide prices range installation labor at $100–$300 with existing connections, and Angi's appliance guide averages about $200.
Premium — gas or pro range with a new line or circuit$350 – $900Yale Appliance prices gas and pro range installs at $349–$499; HomeGuide prices a new dedicated circuit at $250–$900 and a new gas line at $15–$50+ per linear foot.

Where the money goes

Part of the jobShareNote
Installation labor50–70% of totalHomeGuide prices range labor at $100–$300; Angi's appliance guide averages about $200
Gas line or 240V circuit0–40% of totalZero on a like-for-like swap; HomeGuide prices a new gas line at $15–$50+ per linear foot and a new circuit at $250–$900
Venting & anti-tip bracket5–15% of totalA range needs a working vent above it — see the range hood guide — and an anti-tip bracket, a small part with an outsized safety job
Delivery, haul-away & permits5–15% of totalRetailers often bundle delivery; HomeGuide prices permits for new plumbing or electrical lines at $50–$300
Installation labor · 50–70%Gas line or 240V circuit · 0–40%Venting & anti-tip bracket · 5–15%Delivery, haul-away & permits · 5–15%
Estimator’s note: on a range installation, installation labor is usually where quotes swing most (50–70% of total of a typical budget). Ask every contractor to itemize that line in writing — totals are only comparable when that part is.
A freestanding gas range with a kettle on its burners, control knobs and oven door below: the range is one unit, cooktop and oven together — which is why its install is priced as one job, not two
A freestanding gas range with a kettle on its burners, control knobs and oven door below: the range is one unit, cooktop and oven together — which is why its install is priced as one job, not two

What moves the price most

Fuel is the first lever: a gas range needs a gas line and a leak check, an electric one needs a 240V circuit, and switching fuel is the expensive version — Fixr's appliance data puts changing the fuel source at about $180 for the electrician's work and $200 for the plumber's gas line. Existing hookups are second: a like-for-like swap on connections that are already there is a one-to-two-hour job, while a new line or circuit is half a day of trade work. Size is third: a standard 30-inch range is the budget tier; a 36- or 48-inch pro range is heavier, needs two crew, and Yale prices gas and pro installs at $349–$499. Venting is fourth: the range is only half the job if the hood above it does not work — Angi prices range hood installation at $400–$1,500, a separate project on this site. Worked example at the most-pay figure: labor $150 + gas-line check and fittings $30 + delivery and haul-away $20 = $200. For the cooktop-only version, see our cooktop installation guide, and for the vent above it see our range hood installation guide and our kitchen remodel guide.

Work out your quantities: before you compare quotes, run your measurements through our free remodeling calculators (paint, tile, concrete and flooring) — each one shows its formula and runs entirely in your browser.

Costs in your city

Labor is the biggest variable in any remodel, and labor is local — the same bathroom can price very differently in Houston than in Boston. We are adding city editions metro by metro, each with its own labor index, permit notes and climate factors, written for that city rather than copied from this page. Wave 1: Houston, Dallas–Fort Worth, Phoenix, Atlanta, Miami–South Florida, Orlando, Tampa, Charlotte, Austin and San Antonio. Until your city's page is live, use the national range here and weight it the way contractors do: Sun Belt labor often prices near or below the national middle, while coastal California and the Northeast metros often price well above it.

How this estimate was built: the range on this page is a synthesis of at least three published industry sources (national cost guides and the Remodeling Magazine Cost vs. Value data among them), cross-checked in October 2026. We publish planning ranges, never a single pretend-precise price. Full method: How We Estimate Costs.
An older white oven in close view, five control knobs above its glass door: the knobs and the oven window are part of the range, so a faulty control is a repair, not part of the install price
An older white oven in close view, five control knobs above its glass door: the knobs and the oven window are part of the range, so a faulty control is a repair, not part of the install price

Frequently asked questions

How much does it cost to install a range?

Typically $100–$300 for labor with existing hookups, with $200 the middle of the published bands — the range itself runs $600–$1,300 in HomeGuide's data, priced separately.

How much does it cost to install a gas range?

The labor is the same $100–$300 band when the gas line is already there; a new gas line adds $15–$50+ per linear foot in HomeGuide's guide, and Yale prices gas and pro range installs at $349–$499.

Can I install a range myself?

An electric slide-in swap is the most DIY-friendly version. Gas hookups and hardwired 240V need a licensed pro — Angi notes gas models need a gas fitter or plumber.

Does a range need a vent?

Yes — a range hood above it: Angi prices range hood installation at $400–$1,500, and the hood is a separate project on this site.

How long does range installation take?

About one to two hours for a like-for-like swap; half a day or more when a gas line or a new circuit has to be run.

Before you sign: get at least 3 written local quotes for the same written scope, confirm permits and who pulls them, and keep a 10–20% contingency separate from the contract price.

Ahsan ul Haq — Editor, Remodel Cost Hub

Ahsan compiles and edits the cost guides on Remodel Cost Hub, cross-checking every range against at least three published sources before it is published — the full method is on our Methodology page. Spot an error on this page? Send a correction.

Range Installation cost range graphic
Save this range for later: Pin it on Pinterest

Related cost guides