Microwave Installation cost at a glance
- Typical range: $120 – $250
- Most homeowners pay: around $155
- Prices vary most by: Installation labor (50–70% of the budget)
Cross-checked against three published sources for this project. Sources used for this page: Angi's microwave installation cost guide, updated September 22, 2026 (national average $155 from 1,765 verified projects, most $120–$222; countertop $100–$580, over-the-range $250–$1,200, built-in $500–$2,500; standard installations $120–$250 in its hire-a-pro guide, average $150, complex $400–$600), HomeGuide's appliance installation cost guide (microwave installation labor $100–$400 for a replacement with existing ducts; new ducts $300–$600 in labor; a new unit $100–$600) and Thumbtack's 2026 microwave installation cost data (national average $122–$255, low end $74, high end $487; microwave oven $106–$238 in its appliance guide; a cabinet trim kit $100–$200). Synthesized typical = the $120–$250 overlap of Angi's most-pay band and Thumbtack's average, with $155 most-pay at Angi's published average. Checked November 2026.. Sources last checked: October 2026 — HomeGuide, Angi, Thumbtack. How we calculate these costs
Cost by scope

| Scope | Typical cost | What it includes |
|---|---|---|
| Budget — countertop swap, plug-in only | $100 – $150 | A countertop unit needs no fitting at all — Angi prices countertop microwave projects from $100, and Thumbtack's low end for an install is $74. |
| Standard — over-the-range replacement, existing duct | $120 – $250 | The typical project on this page: Angi averages $155 for microwave installation, most $120–$222, and Thumbtack puts the national average at $122–$255. |
| Premium — built-in or drawer with cabinet work | $500 – $2,500 | Angi prices built-in microwave installation at $500–$2,500, and its new-microwave guide puts professional installation for built-in models at $200–$2,000. |
Where the money goes
| Part of the job | Share | Note |
|---|---|---|
| Installation labor | 50–70% of total | Angi averages $155 for the install, most $120–$222; Thumbtack prices microwave installation at $122–$255 |
| Mounting bracket & trim kit | 10–20% of total | An over-the-range unit needs its wall bracket and a trim kit where the cabinet opening is larger — Thumbtack prices a cabinet trim kit at $100–$200 |
| Ducting & venting | 0–30% of total | Zero on a ductless replacement; HomeGuide prices adding new ducts at $300–$600 in labor |
| Delivery, haul-away & permits | 5–15% of total | Retailers often bundle delivery; HomeGuide prices removing an old appliance at $25–$150 |

What moves the price most
Type is the first lever: a countertop microwave is a plug-in job, an over-the-range unit needs a bracket fixed to studs and a vent connection, and a built-in or drawer microwave needs cabinet work — Angi prices built-in installation at $500–$2,500 against $120–$250 for a standard over-the-range swap. Existing ducting is second: a replacement on a duct that is already there is a one-to-two-hour job, while new ducting adds $300–$600 in HomeGuide's guide. Electrical is third: most microwaves run on a standard outlet, but a new dedicated circuit is $250–$900 in HomeGuide's appliance guide. Cabinet fit is fourth: a trim kit bridges a gap between the unit and the opening — Thumbtack prices one at $100–$200 — and a unit that does not fit the cutout is a carpentry job, not an install. Worked example at the most-pay figure: labor $100 + bracket and hardware $30 + haul-away $25 = $155. For the vent above it see our range hood installation guide, and for the rest of the kitchen see our cooktop installation guide and our kitchen remodel guide.
Costs in your city
Labor is the biggest variable in any remodel, and labor is local — the same bathroom can price very differently in Houston than in Boston. We are adding city editions metro by metro, each with its own labor index, permit notes and climate factors, written for that city rather than copied from this page. Wave 1: Houston, Dallas–Fort Worth, Phoenix, Atlanta, Miami–South Florida, Orlando, Tampa, Charlotte, Austin and San Antonio. Until your city's page is live, use the national range here and weight it the way contractors do: Sun Belt labor often prices near or below the national middle, while coastal California and the Northeast metros often price well above it.

Frequently asked questions
How much does it cost to install a microwave?
Typically $120–$250 for labor with existing connections, with $155 the middle of the published bands — the unit itself runs $100–$600 in HomeGuide's data, priced separately.
How much does it cost to install an over-the-range microwave?
The standard tier on this page, $120–$250 with the duct already there; Angi prices over-the-range projects at $250–$1,200 where the unit is included, and new ducting adds $300–$600 in HomeGuide's guide.
Can I install a microwave myself?
A countertop unit is a plug-in job. An over-the-range unit needs a bracket fixed to studs and a vent connection — Angi's install guide puts a professional at about $185 for that job, and a built-in needs cabinet work.
Does a microwave need a vent?
An over-the-range microwave is the vent: it needs a duct to the outside or a recirculating filter — HomeGuide prices new ducts at $300–$600, and the range hood guide covers the alternative.
How long does microwave installation take?
About one to two hours for a like-for-like over-the-range swap; half a day when new ducting or a circuit has to be run.






