Home › Cost Guides › Cooktop Installation
Cost Guide

How Much Does a Cooktop Installation Cost? (2026)

By Ahsan ul Haq · Last updated: 11 November 2026 · Planning estimate — not a quote · How we estimate

Typical range
$400 – $800
Most homeowners pay around $500 · A standard 30-inch cooktop installed where a cooktop already stood, existing gas or electric hookups in place — installation only, the cooktop unit itself priced separately
typical
$400$800
Low end = minor scope  ·  marker = typical middle  ·  high end = major scope. Add 10–20% contingency to any budget.
Wide kitchen with a black glass electric cooktop set into a granite island, white cabinets and built-in wall oven

Cooktop Installation cost at a glance

  • Typical range: $400 – $800
  • Most homeowners pay: around $500
  • Prices vary most by: Installation labor (40–60% of the budget)

Cross-checked against three published sources for this project. Sources used for this page: Angi's cooktop installation cost guide, updated October 29, 2026 (national average $500, most $400–$800, basic electric from $350, high-end gas or induction above $2,500; 30-inch $350–$700, 36-inch $500–$900, 48-inch $800–$1,500; electric $350–$800, gas $400–$1,000; labor $50–$150 per hour; permits $150–$300) and Angi's gas cooktop guide, updated October 16, 2026 (gas installation $1,200–$2,200, most around $1,700), HomeGuide's appliance installation cost guide (cooktop labor $150–$370, unit $400–$1,300; gas cooktop installed $550–$2,800; new gas line $15–$50+ per linear foot, new circuit $250–$900, outlet $150–$350) and Fixr's gas-stove-alternatives data as reported by KitchenRank (installed electric $375–$1,150, gas $400–$1,675, induction $1,225–$2,850; electric install $75–$150, gas $100–$175, induction $225–$350). Synthesized typical = Angi's standard-installation band at $400–$800, with $500 most-pay at Angi's published average. Checked November 2026.. Sources last checked: October 2026 — HomeGuide, Fixr, Angi. How we calculate these costs

Cost by scope

Cooktop Installation cost ranges by scope — chart of the table below
ScopeTypical costWhat it includes
Budget — electric swap, existing 240V outlet$350 – $500Angi prices basic electric installs from $350, and Fixr prices electric installation at $75–$150 on top of the unit.
Standard — gas or electric, existing hookups$400 – $800The typical project on this page: Angi's standard band, with a $500 national average, and HomeGuide prices cooktop installation labor at $150–$370.
Premium — induction or gas with a new line or circuit$1,200 – $2,500Angi prices gas cooktop installation at $1,200–$2,200 and high-end gas or induction with complex modifications above $2,500; Fixr prices induction installed at $1,225–$2,850.

Where the money goes

Part of the jobShareNote
Installation labor40–60% of totalAngi prices electrician labor at $40–$120 per hour and plumber labor at $75–$130, over one to two hours; HomeGuide prices cooktop installation labor at $150–$370
Hookup materials & connectors10–20% of totalGas fittings, flexible connectors and wiring are the small parts that make the hookup safe — a new 240V outlet runs $150–$350 in HomeGuide's guide
New gas line or circuit0–40% of totalOnly when the fuel changes: HomeGuide prices a new gas line at $15–$50+ per linear foot and a new dedicated circuit at $250–$900
Permits, disposal & cutout work10–20% of totalAngi prices permits at $150–$300; enlarging a countertop cutout or hauling the old unit away is the rest of this line
Installation labor · 40–60%Hookup materials & connectors · 10–20%New gas line or circuit · 0–40%Permits, disposal & cutout work · 10–20%
Estimator’s note: on a cooktop installation, installation labor is usually where quotes swing most (40–60% of total of a typical budget). Ask every contractor to itemize that line in writing — totals are only comparable when that part is.
Gas burners set into a wooden countertop: Angi prices gas cooktop installation at $1,200–$2,200 when a new gas line is part of the job, against $400–$800 for a standard install on existing hookups
Gas burners set into a wooden countertop: Angi prices gas cooktop installation at $1,200–$2,200 when a new gas line is part of the job, against $400–$800 for a standard install on existing hookups

What moves the price most

Fuel type is the first lever: Angi prices a standard electric install from $350 and gas at $400–$1,000, while induction — which needs a 240V circuit and heavier wiring — is the priciest install in Fixr's data at $225–$350 of labor alone. Existing hookups are second: a like-for-like swap on connections that are already there is a one-to-two-hour job, while switching fuel means a new gas line at $15–$50+ per linear foot or a new circuit at $250–$900 in HomeGuide's guide. Size is third: Angi prices a 30-inch cooktop at $350–$700, a 36-inch at $500–$900 and a 48-inch at $800–$1,500. The countertop cutout is fourth: a unit that does not fit the existing opening needs the counter cut or the cabinet adjusted, which is real carpentry on top of the hookup. Worked example at the most-pay figure: electrician labor $250 + wiring and connectors $100 + permit $150 = $500. For the vent above the cooktop, see our range hood installation guide, and for the counter it sits in see our countertop installation guide and our kitchen cabinets guide.

Work out your quantities: before you compare quotes, run your measurements through our free remodeling calculators (paint, tile, concrete and flooring) — each one shows its formula and runs entirely in your browser.

Costs in your city

Labor is the biggest variable in any remodel, and labor is local — the same bathroom can price very differently in Houston than in Boston. We are adding city editions metro by metro, each with its own labor index, permit notes and climate factors, written for that city rather than copied from this page. Wave 1: Houston, Dallas–Fort Worth, Phoenix, Atlanta, Miami–South Florida, Orlando, Tampa, Charlotte, Austin and San Antonio. Until your city's page is live, use the national range here and weight it the way contractors do: Sun Belt labor often prices near or below the national middle, while coastal California and the Northeast metros often price well above it.

How this estimate was built: the range on this page is a synthesis of at least three published industry sources (national cost guides and the Remodeling Magazine Cost vs. Value data among them), cross-checked in October 2026. We publish planning ranges, never a single pretend-precise price. Full method: How We Estimate Costs.
A stainless steel gas cooktop in close view: Fixr prices gas installation at $100–$175 on top of the unit, and induction — the priciest install — at $225–$350
A stainless steel gas cooktop in close view: Fixr prices gas installation at $100–$175 on top of the unit, and induction — the priciest install — at $225–$350

Frequently asked questions

How much does it cost to install a cooktop?

Typically $400–$800 for a standard install with existing hookups, with $500 the middle of Angi's band — the cooktop unit itself is priced separately.

How much does it cost to install a gas cooktop?

Angi's gas guide prices it at $1,200–$2,200, most around $1,700, because the gas line and permits are usually part of the job; a like-for-like gas swap with the line already there lands in the standard $400–$800 band.

Does a cooktop need a permit?

Angi prices permits at $150–$300. Gas work and new circuits usually need one; a like-for-like electric swap often does not — check the local code before the installer starts.

How long does cooktop installation take?

One to two hours for a like-for-like swap in Angi's guide; half a day or more when a gas line or a new circuit has to be run.

Can I install a cooktop myself?

An electric plug-in swap is the most DIY-friendly version. Gas hookups and hardwired 240V need a licensed pro — Angi notes electric cooktops need an electrician and gas models need a gas fitter or plumber.

Before you sign: get at least 3 written local quotes for the same written scope, confirm permits and who pulls them, and keep a 10–20% contingency separate from the contract price.

Ahsan ul Haq — Editor, Remodel Cost Hub

Ahsan compiles and edits the cost guides on Remodel Cost Hub, cross-checking every range against at least three published sources before it is published — the full method is on our Methodology page. Spot an error on this page? Send a correction.

Cooktop Installation cost range graphic
Save this range for later: Pin it on Pinterest

Related cost guides