Pet Door Installation cost at a glance
- Typical range: $200 – $500
- Most homeowners pay: around $400
- Prices vary most by: Labor (cutting, fitting, sealing) (40–60% of the budget)
Cross-checked against three published sources for this project. Sources used for this page: Angi's dog door installation cost guide, updated October 10, 2026 (national average $400, most $100–$500; standard door install $100–$300; interior door $20–$300; sliding-glass insert $150–$1,500; wall-mounted $150–$2,000 or more; pre-installed $500–$2,000; handyperson labor $75–$300, $30–$75 an hour, door contractor $70–$125 an hour; flap sized at least 2 inches taller and wider than the pet), HomeGuide's dog door installation cost guide ($200–$800 or more installed; small $150–$500, extra-large $400–$1,300 or more; door $150–$800, window and glass $350–$1,300, wall $200–$2,000; professional install 1–4 hours) and HomeAdvisor's pet door installation cost guide (average $400, range $100–$500; labor 40–60% of the total, $200–$1,500 where the door is supplied; interior $20–$300, sliding-glass insert $150–$1,500, wall-mounted $150–$2,000 or more, pre-installed $500–$2,000). Synthesized typical = the Angi and HomeAdvisor $100–$500 band overlapped with HomeGuide's $200–$800 band; $400 most-pay is the average in both Angi and HomeAdvisor. Checked November 2026.. Sources last checked: October 2026 — HomeAdvisor, HomeGuide, Angi. How we calculate these costs
Cost by scope

| Scope | Typical cost | What it includes |
|---|---|---|
| Basic flap in an interior or existing door | $150 – $300 | HomeGuide puts a small door at $150–$500 and Angi puts a standard door install at $100–$300; a simple flap in a door you already own is the cheapest honest job. |
| Standard exterior door, medium pet | $200 – $500 | The typical project on this page. Angi's most-pay band is $100–$500 with a $400 average, HomeGuide's installed range is $200–$800, and HomeAdvisor's average is also $400. |
| Wall, glass or electronic | $500 – $1,500 | HomeGuide puts glass at $350–$1,300 and wall at $200–$2,000; Angi puts wall-mounted and pre-installed options up to $2,000, and electronic doors add the unit cost on top. |
Where the money goes
| Part of the job | Share | Note |
|---|---|---|
| Pet door unit (flap, frame, lock) | 40–55% of total | The unit ranges from $20 for a basic interior insert to over $2,000 for wall or electronic models in Angi; the unit is the swing factor on this job |
| Labor (cutting, fitting, sealing) | 40–60% of total | HomeAdvisor puts labor at 40–60% of the total, $200–$1,500 where the door is supplied; a handyperson runs $30–$75 an hour against $70–$125 for a door contractor in Angi and HomeAdvisor |
| Weatherproofing, trim and tunnel liners | 5–15% of total | Wall installs need tunnel liners, sealing and patching on both faces; glass installs need a custom pane or a track insert |
| Security add-ons (locking cover, electronic lock) | 5–10% of total | Locking flaps and microchip or electronic locks are the add-on line; most modern doors include a locking cover in HomeGuide |

What moves the price most
Location is first: HomeGuide prices a door install at $150–$800, glass at $350–$1,300 and wall at $200–$2,000 — a door you already own is always the cheapest place to put a flap. Size is second: HomeGuide's small doors run $150–$500 against $400–$1,300 or more for extra-large, and Angi sizes the flap at least 2 inches taller and 2 inches wider than the pet. Type is third: HomeAdvisor prices interior inserts at $20–$300, sliding-glass inserts at $150–$1,500 and pre-installed doors at $500–$2,000 — the electronic lock is a unit cost, not a labor cost. Who fits it is fourth: a handyperson at $30–$75 an hour suits a door cut, while glass and wall cuts usually need a door contractor or glazier at $70–$125 an hour in Angi. For the door itself, see our door installation guide, for a replacement exterior door, see our exterior door replacement guide, and for sliding glass doors, see our sliding glass door installation guide.
Costs in your city
Labor is the biggest variable in any remodel, and labor is local — the same bathroom can price very differently in Houston than in Boston. We are adding city editions metro by metro, each with its own labor index, permit notes and climate factors, written for that city rather than copied from this page. Wave 1: Houston, Dallas–Fort Worth, Phoenix, Atlanta, Miami–South Florida, Orlando, Tampa, Charlotte, Austin and San Antonio. Until your city's page is live, use the national range here and weight it the way contractors do: Sun Belt labor often prices near or below the national middle, while coastal California and the Northeast metros often price well above it.

Frequently asked questions
How much does pet door installation cost?
A standard exterior-door install runs $200–$500 with $400 typical — the average in both Angi and HomeAdvisor. Angi's broader most-pay band is $100–$500 and HomeGuide's installed range is $200–$800.
What is the cheapest way to install a pet door?
A basic flap in an interior or existing door, at $20–$300 for the unit in HomeAdvisor and $100–$300 installed in Angi. It needs no weatherproofing and no new door, which is why it is the cheapest honest job.
How much does a wall-mounted pet door cost?
HomeGuide prices wall installs at $200–$2,000 and Angi at $150–$2,000 or more: cutting through the wall, lining the tunnel, sealing both faces and patching cost more than cutting a door, and wiring or plumbing behind the wall can add to it.
Can a pet door go in a glass door?
Yes, at $350–$1,300 installed in HomeGuide: either a track insert for a sliding door or a custom-cut pane. Cutting tempered glass is specialist work, not a handyperson cut.
What size pet door does my pet need?
Angi's sizing rule is a flap at least 2 inches taller and 2 inches wider than the pet, measured at the shoulders and the widest point. A flap the pet has to squeeze through gets ignored, and a flap far too large wastes heat and weakens security.
How long does installation take?
HomeGuide puts a professional install at 1–4 hours depending on location, and Angi puts a handyperson door cut at a couple of hours. Wall and glass installs run longer because of the lining, sealing and finishing on both sides.






