Garage Door Spring Replacement cost at a glance
- Typical range: $150 – $350
- Most homeowners pay: around $250
Cross-checked against three published sources for this project. Sources used for this page: Angi's garage door spring replacement cost guide (average $250, range $150–$350 per spring, extension spring part $50–$100, torsion spring part $75–$150, residential labor $75–$150, one door $150–$350, two doors $275–$425, three doors $350–$700, conversion torsion to extension $250–$500 and extension to torsion $400–$800, full door replacement $750–$1,700), HomeGuide's garage door spring replacement cost guide (torsion $150–$350, extension $120–$200, torsion and bar $200–$400, spring and cable $200–$500, conversion $400–$800+, insulated door $250–$400, double door $300–$600, annual maintenance $40–$80, torsion lifespan 7–14 years or 10,000–20,000 cycles, extension lifespan 4–10 years or 5,000–15,000 cycles) and This Old House's garage door spring cost guide (complete set $300–$540, average $420, extension set $300–$400 with parts $20–$60, torsion set $350–$540 with parts $80–$120, cable repair $170–$320, tune-up $120–$240, full door replacement $970–$1,580, torsion lifespan 8–15 years, extension lifespan 7–12 years). Sources last checked: October 2026 — This Old House, HomeGuide, Angi. How we calculate these costs
Cost by scope

| Scope | Typical cost | What it includes |
|---|---|---|
| Extension spring job | $120 – $200 | The cheap end: HomeGuide's band to replace extension springs, the lighter-duty springs that run along the tracks on older or lighter doors |
| Standard spring job — the typical band | $150 – $350 | The shared band itself: Angi's $150–$350 per-spring range and HomeGuide's $150–$350 torsion replacement meeting here for a standard single-door job |
| Torsion pair, heavy door or conversion | $350 – $800 | The expensive end: This Old House's $350–$540 installed torsion set, HomeGuide's $300–$600 double-door job, and a full extension-to-torsion conversion at $400–$800+ |
Where the money goes
| Part of the job | Share | Note |
|---|---|---|
| Average job, Angi | $250 | Angi's average for a garage door spring replacement, with prices often ranging $150–$350 or more |
| Single spring range, Angi | $150 – $350 | Angi's range per spring, plus labor in the local area |
| Extension spring part, Angi | $50 – $100 | Angi's part price for one extension spring |
| Torsion spring part, Angi | $75 – $150 | Angi's part price for one torsion spring |
| Residential labor, Angi | $75 – $150 | Angi's labor band for a residential spring replacement; commercial-grade springs run $150–$300 |
| One door, Angi | $150 – $350 | Angi's band for springs on a single garage door |
| Two doors, Angi | $275 – $425 | Angi's band when springs are replaced on two garage doors in one visit |
| Three doors, Angi | $350 – $700 | Angi's band for three doors, with related repairs able to push the total toward $500+ |
| Torsion replacement, HomeGuide | $150 – $350 | HomeGuide's band for a torsion spring replacement, materials and labor included |
| Extension replacement, HomeGuide | $120 – $200 | HomeGuide's band for an extension spring replacement, materials and labor included |
| Torsion spring and bar, HomeGuide | $200 – $400 | HomeGuide's band for the complete torsion system including the metal rod the springs coil around |
| Spring and cable replacement, HomeGuide | $200 – $500 | HomeGuide's band for springs plus the lift cables, which often need replacing in the same visit |
| Convert extension to torsion, HomeGuide | $400 – $800+ | HomeGuide's band for a full conversion to a torsion system, including new torsion hardware |
| Insulated door, HomeGuide | $250 – $400 | HomeGuide's band where extra door weight demands heavy-duty or dual springs |
| Double door, HomeGuide | $300 – $600 | HomeGuide's band for a wider opening needing multiple spring sets |
| Annual spring maintenance, HomeGuide | $40 – $80 | HomeGuide's band for tension adjustment, lubrication and a safety inspection |
| Complete set, This Old House | $300 – $540 | This Old House's band for a complete set of springs, parts and professional labor, with a $420 average |
| Extension set installed, This Old House | $300 – $400 | This Old House's installed band for an extension spring set, parts $20–$60 |
| Torsion set installed, This Old House | $350 – $540 | This Old House's installed band for a torsion spring set, parts $80–$120 |
| Cable repair, This Old House | $170 – $320 | This Old House's band for a garage door cable repair found during the same visit |
| Door tune-up, This Old House | $120 – $240 | This Old House's band for a garage door tune-up bundled with the spring job |
| Full door replacement, This Old House | $970 – $1,580 | This Old House's comparison figure for a whole new garage door, against Angi's $750–$1,700 — the spring job is the cheaper fix when panels, tracks and opener are still sound |
| Torsion lifespan, HomeGuide / This Old House | 7 – 15 years | HomeGuide puts torsion springs at 7–14 years or 10,000–20,000 cycles; This Old House at 8–15 years |
| Extension lifespan, HomeGuide / This Old House | 4 – 12 years | HomeGuide puts extension springs at 4–10 years or 5,000–15,000 cycles; This Old House at 7–12 years |

What moves the price most
Spring type is the first driver (Angi, HomeGuide): extension springs replace at $120–$200 (HomeGuide) against torsion at $150–$350, and This Old House prices a complete torsion set at $350–$540 against $300–$400 for an extension set. One spring or the pair is second: both guides recommend replacing both springs when one fails, because the surviving spring has done the same cycles — Angi notes a contractor will usually give a better deal for the pair in one visit, while This Old House's set pricing already assumes the pair. Door weight and size is third: HomeGuide prices an insulated door at $250–$400 and a double door at $300–$600, and Angi adds $15–$30 per spring for double-door springs. Related parts and urgency close the bill: cables add $200–$500 as a combined job (HomeGuide), and emergency or after-hours calls carry a premium in every guide.
Costs in your city
Labor is the biggest variable in any remodel, and labor is local — the same bathroom can price very differently in Houston than in Boston. We are adding city editions metro by metro, each with its own labor index, permit notes and climate factors, written for that city rather than copied from this page. Wave 1: Houston, Dallas–Fort Worth, Phoenix, Atlanta, Miami–South Florida, Orlando, Tampa, Charlotte, Austin and San Antonio. Until your city's page is live, use the national range here and weight it the way contractors do: Sun Belt labor often prices near or below the national middle, while coastal California and the Northeast metros often price well above it.

Frequently asked questions
How much does garage door spring replacement cost?
Typically $150–$350, with about $250 the most-pay figure. Angi puts the average job at $250 and HomeGuide prices a torsion replacement at $150–$350; This Old House's $300–$540 band prices a complete set of springs as one job, which is why it sits above the single-spring band.
Should I replace both springs at the same time?
Yes, in almost every case. Both guides say the same thing: springs work in pairs and wear together, so when one breaks the other is near the end of its cycles too — replacing both in one visit keeps the door balanced and avoids a second service call within months.
What is the difference between torsion and extension springs?
Torsion springs mount horizontally above the door opening and twist to store energy; they last longer (7–15 years) and are considered safer because they stay contained when they break. Extension springs stretch along the tracks, cost less up front ($120–$200 installed, HomeGuide), and last 4–12 years.
Can I replace a garage door spring myself?
No — every guide in this page says to hire a professional. Springs hold enormous tension, and a released torsion spring can cause serious injury; HomeGuide warns that DIY attempts can result in serious injury or death, and This Old House recommends a technician even for extension springs.
How long do garage door springs last?
Torsion springs last about 7–15 years (10,000–20,000 cycles) and extension springs about 4–12 years (5,000–15,000 cycles), depending on use — a door opened several times a day wears through cycles far faster than one opened once a day.
When is it better to replace the whole door instead of the springs?
When the door itself is failing too: This Old House puts a full replacement at $970–$1,580 (Angi $750–$1,700), and both guides say the spring job wins when panels, tracks and opener are still sound — but if several components are failing at once, or the door is 15–20 years old, replacement is usually the better spend.






