Home › Cost Guides › Shed Installation
Cost Guide

How Much Does a Shed Installation Cost? (2026)

By Ahsan ul Haq · Last updated: 11 November 2026 · Planning estimate — not a quote · How we estimate

Typical range
$1,500 – $5,000
Most homeowners pay around $3,500 · A shed installation typically costs $1,500 – $5,000, with about $3,500 the most-pay figure — Angi's 2026 guide puts the national average at $3,500, most homeowners spending $1,000–$15,000, and HomeGuide's 10-by-12 prefab shed at $1,200–$3,600 installed against $3,000–$18,000 custom-built. The typical band is the standard-storage-shed overlap: a prefab kit at the bottom, a small custom build at the top, with This Old House's roughly $1,000 ready-to-assemble kit and $2,000-plus contractor build for a 10-by-10 sitting inside it. Size and prefab-versus-custom decide the position, not the shed alone.
typical
$1,500$5,000
Low end = minor scope  ·  marker = typical middle  ·  high end = major scope. Add 10–20% contingency to any budget.
Black garden shed with glass doors beside a brick garden wall

Shed Installation cost at a glance

  • Typical range: $1,500 – $5,000
  • Most homeowners pay: around $3,500

Cross-checked against three published sources for this project. Sources used for this page: Angi's 2026 shed cost guides (national average $3,500, most $1,000–$15,000, prefab $350–$4,000+ at $10–$40/sq ft, custom $800–$15,000+ at $30–$150/sq ft, DIY kit floor $375, sizes 8x8 prefab $640–$2,600 and custom $1,900–$10,200, 10x10 $1,000–$4,000 and $3,000–$16,000, 12x12 $1,400–$5,800 and $4,300–$23,000, materials wood $1,000–$4,300, prefab metal $500–$7,000, plastic $750–$4,000, concrete $10,000–$28,000, brick $15,000–$30,000, labor $200–$6,000, slab $600–$4,800, gravel pad $200–$300 for 10x16, land clearing $250–$2,800 per half-acre, permit $250 average, insulation $0.35–$3/sq ft, roofing $0.50–$15/sq ft, window $300–$1,000, electrician $50–$100/hr, plumber $45–$200/hr), HomeGuide's cost to build a shed guide (10x10 prefab $1,000–$3,000 and custom $2,500–$15,000, 10x12 prefab $1,200–$3,600 and custom $3,000–$18,000) and This Old House's shed guide (ready-to-assemble kit about $1,000, contractor build $2,000+ for a 10-by-10, galvanized metal sheds from under $300, plastic about $100–$200 more, prefab kit 4–8 hours, custom 2–5 days off-site). Sources last checked: October 2026 — This Old House, HomeGuide, Angi. How we calculate these costs

Cost by scope

Shed Installation cost ranges by scope — chart of the table below
ScopeTypical costWhat it includes
Basic prefab kit, DIY or handyman$375 – $1,500The small tier: Angi's $375 DIY-kit floor and HomeGuide's small prefab sizes, with handyman assembly on top
Standard job — the typical band$1,500 – $5,000The shared band itself: HomeGuide's 10-by-12 prefab band at the bottom and small custom builds at the top, around Angi's $3,500 average
Custom-built shed$5,000 – $15,000+The expensive end: Angi's custom band to $15,000+, against HomeGuide's custom 10-by-12 at $3,000–$18,000

Where the money goes

Part of the jobShareNote
Average project, Angi$3,500Angi's 2026 national average for building a shed, most projects $1,000–$15,000
Average project, HomeGuide$2,500 – $15,000HomeGuide's average band for a 10-by-10 custom-built shed; prefab of the same size runs $1,000–$3,000
Prefab shed, Angi$350 – $4,000+Angi's prefab band at $10–$40 per square foot
Custom shed, Angi$800 – $15,000+Angi's custom band at $30–$150 per square foot
DIY kit floor, Angi$375Angi's floor for a basic DIY shed kit; a large commercial shed can exceed $100,000
8-by-8 prefab / custom, Angi$640 – $2,600 / $1,900 – $10,200Angi's size-table bands for an 8-by-8 shed
10-by-10 prefab / custom, Angi$1,000 – $4,000 / $3,000 – $16,000Angi's size-table bands for a 10-by-10 shed
12-by-12 prefab / custom, Angi$1,400 – $5,800 / $4,300 – $23,000Angi's size-table bands for a 12-by-12 shed
10-by-12 prefab, HomeGuide$1,200 – $3,600HomeGuide's installed prefab band for a 10-by-12 shed
10-by-12 custom, HomeGuide$3,000 – $18,000HomeGuide's installed custom band for a 10-by-12 shed
Ready-to-assemble kit, This Old Houseabout $1,000This Old House's RTA-kit price with preassembled panels and pre-hung doors, completable in a weekend
Contractor build 10-by-10, This Old House$2,000+This Old House's contractor floor for a 10-by-10 wood structure
Wood shed, Angi$1,000 – $4,300Angi's wood-material band
Prefab metal shed, Angi$500 – $7,000Angi's prefab-metal band; This Old House prices galvanized metal sheds from under $300
Plastic shed, Angi$750 – $4,000Angi's plastic band; This Old House prices plastic models about $100–$200 above metal
Concrete shed, Angi$10,000 – $28,000Angi's concrete-material band
Brick shed, Angi$15,000 – $30,000Angi's brick-material band
Storage shed type, Angi$800 – $2,300Angi's basic storage-shed type band; a modern shed runs $5,000–$16,000
Labor, Angi$200 – $6,000Angi's labor band for a shed build, handyperson $50–$150 an hour and contractor $200–$6,000
Concrete slab foundation, Angi$600 – $4,800Angi's slab-foundation band; a gravel pad for a 10-by-16 runs $200–$300
Land clearing, Angi$250 – $2,800 per half-acreAngi's land-clearing band; leveling runs $500+ for a small piece of land
Building permit, Angi$250 averageAngi's average permit band where a permit is needed
Insulation, Angi$0.35 – $3 per square footAngi's insulation band for a shed
Roofing, Angi$0.50 – $15 per square footAngi's shed-roofing band by type
Window add-on, Angi$300 – $1,000Angi's per-window band for a shed
Electrician, Angi$50 – $100 per hourAngi's electrician band for shed wiring
Plumber, Angi$45 – $200 per hourAngi's plumber band for shed plumbing
A plain wooden storage shed: the standard storage tier runs $800–$2,300 in Angi's type table, and a prefab kit is the cheapest way to get there at $350–$4,000+
A plain wooden storage shed: the standard storage tier runs $800–$2,300 in Angi's type table, and a prefab kit is the cheapest way to get there at $350–$4,000+

What moves the price most

Size is the first driver (Angi, HomeGuide): Angi's prefab table runs $640–$2,600 for 8-by-8 against $1,000–$4,000 for 10-by-10 and $1,400–$5,800 for 12-by-12, with custom builds roughly triple those bands, and HomeGuide's 10-by-12 at $1,200–$3,600 prefab against $3,000–$18,000 custom. Prefab versus custom is second: prefab at $350–$4,000+ against custom at $800–$15,000+ (Angi), and This Old House's ready-to-assemble kit at about $1,000 against a contractor build from $2,000 for a 10-by-10. Material is third: wood at $1,000–$4,300 and prefab metal at $500–$7,000 against concrete at $10,000–$28,000 and brick at $15,000–$30,000 (Angi). Site work closes the bill: a slab at $600–$4,800 against a gravel pad at $200–$300 for a 10-by-16 (Angi), land clearing at $250–$2,800 per half-acre, and a permit averaging $250 where one is needed.

Work out your quantities: before you compare quotes, run your measurements through our free remodeling calculators (paint, tile, concrete and flooring) — each one shows its formula and runs entirely in your browser.

Costs in your city

Labor is the biggest variable in any remodel, and labor is local — the same bathroom can price very differently in Houston than in Boston. We are adding city editions metro by metro, each with its own labor index, permit notes and climate factors, written for that city rather than copied from this page. Wave 1: Houston, Dallas–Fort Worth, Phoenix, Atlanta, Miami–South Florida, Orlando, Tampa, Charlotte, Austin and San Antonio. Until your city's page is live, use the national range here and weight it the way contractors do: Sun Belt labor often prices near or below the national middle, while coastal California and the Northeast metros often price well above it.

How this estimate was built: the range on this page is a synthesis of at least three published industry sources (national cost guides and the Remodeling Magazine Cost vs. Value data among them), cross-checked in October 2026. We publish planning ranges, never a single pretend-precise price. Full method: How We Estimate Costs.
Garden tools on a shed wall: this is what a storage shed is for — and the tools, shelving and ramps are the extras that sit outside the $1,500–$5,000 typical band
Garden tools on a shed wall: this is what a storage shed is for — and the tools, shelving and ramps are the extras that sit outside the $1,500–$5,000 typical band

Frequently asked questions

How much does shed installation cost?

Typically $1,500–$5,000, with about $3,500 the most-pay figure. Angi's 2026 guide puts the national average at $3,500, most homeowners spending $1,000–$15,000 — HomeGuide's 10-by-12 prefab band is $1,200–$3,600 installed against $3,000–$18,000 custom-built, published as-is rather than averaged away.

Is a prefab shed cheaper than a custom shed?

Yes — prefab runs $350–$4,000+ against custom at $800–$15,000+ (Angi), and This Old House prices a ready-to-assemble kit at about $1,000 against a contractor build from $2,000 for a 10-by-10; prefab is the right call for plain storage, custom for windows, plumbing or electric work.

Do I need a permit for a shed?

Often not for a small one, but check first: Angi prices a permit at $250 on average where needed, and This Old House notes galvanized metal sheds from under $300 still need to meet local setback and size rules — larger or livable sheds almost always need one.

What foundation does a shed need?

A gravel pad or skid foundation is the cheap route — Angi prices a gravel pad at $200–$300 for a 10-by-16 against a concrete slab at $600–$4,800 — but a slab is the right base for a heavy or permanent shed, and the ground must be level either way.

How long does it take to build a shed?

A prefab shed takes 4–8 hours for a crew (Angi), while a custom shed is built off-site over 2–5 days plus a few hours to move it into place — site prep, slab curing and permits add time on top of either.

Before you sign: get at least 3 written local quotes for the same written scope, confirm permits and who pulls them, and keep a 10–20% contingency separate from the contract price.

Ahsan ul Haq — Editor, Remodel Cost Hub

Ahsan compiles and edits the cost guides on Remodel Cost Hub, cross-checking every range against at least three published sources before it is published — the full method is on our Methodology page. Spot an error on this page? Send a correction.

Shed Installation cost range graphic
Save this range for later: Pin it on Pinterest

Related cost guides

White octagonal gazebo with a metal roof on a paved plaza

Gazebo Installation Cost

$4,300 – $10,000

A gazebo installation typically costs $4,300 – $10,000, with about $5,700 the most-pay figure — Angi's 2026 guide puts the average at $5,700, most homeowners spending $2,700–$9,900, and HomeGuide's kit-plus-labor band is the same $4,300–$10,000 with kits alone at $3,600–$8,600. Fixr's landscaping guide prices building a gazebo higher at $7,500–$10,000 on average, published as-is rather than averaged away. Kit versus custom decides the position: a pre-cut kit is the typical band, while a custom build starts where the kit band ends.

Two-story house with a white panel garage door beside the front entry and a car in the driveway

Garage Door Spring Replacement Cost

$150 – $350

A garage door spring replacement typically costs $150 – $350, with about $250 the most-pay figure — Angi puts the average job at $250 with a $150–$350 range per spring, and HomeGuide prices a torsion spring replacement at exactly the same $150–$350 band with extension springs at $120–$200. This Old House prices a complete set of springs higher, at $300–$540 with a $420 average, because it prices the pair as one job rather than a single spring — that set figure is published separately below, not merged into the typical band.

Wooden garage door in snow against a brick wall

Garage Door Insulation Cost

$300 – $1,000

Adding insulation to an existing garage door, professionally installed — DIY kits and a full insulated replacement door priced separately below

Car parked on a brick-paver driveway with weeds growing through the joints

Driveway Repair Cost

$800 – $2,800

A driveway repair typically costs $800 – $2,800, with about $1,500 the most-pay figure — Thumbtack prices concrete driveway repair at $802–$2,800 nationally, HomeGuide puts the national average at $1,200 inside a $300–$2,500 average range, and Angi prices concrete driveway repair higher, at $1,872 on average with most homeowners paying $829–$2,925. The $1,500 most-pay figure sits between HomeGuide's and Angi's published averages; small spot repairs land far below the band and a resurface or partial replacement lands above it.

Wooden double entry door with glazed panels and a dark stone surround on a house front

Door Repair Cost

$130 – $375

A door repair typically costs $130 – $375, with about $240 the most-pay figure — Angi puts the national average at $240 from 18,005 verified projects with most homeowners paying $132–$372, Fixr prices a handyman door repair at $125–$200 before materials, and HomeGuide prices frame work at $113–$222 for an interior frame and $131–$382 for an exterior frame. The $240 most-pay figure is Angi's published average; small hardware and adjustment jobs land below the band and frame or structural work lands above it.

Covered deck with wood decking, a pergola frame and a dining set beside a modern house

Deck Resurfacing Cost

$5,000 – $12,000

Deck resurfacing typically costs $5,000 – $12,000 for about 300 sq ft, with about $7,500 the most-pay figure — Angi prices resurfacing at $15–$50 per sq ft, HomeGuide prices wood board replacement at $25–$50 per sq ft and composite at $40–$80, and the Coowin Group guide prices composite resurfacing at $15–$35 per sq ft. The $5,000–$12,000 typical band is the wood-to-composite overlap for a 300 sq ft deck; the $7,500 most-pay figure sits at the low end of HomeGuide's wood band and inside the Coowin composite band.