Home › Cost Guides › Greenhouse Installation
Cost Guide

How Much Does a Greenhouse Installation Cost? (2026)

By Ahsan ul Haq · Last updated: 11 November 2026 · Planning estimate — not a quote · How we estimate

Typical range
$5,000 – $16,200
Most homeowners pay around $9,600 · Greenhouse installation typically costs $5,000 – $16,200, with about $9,600 the figure most standard jobs land near — Angi prices the national average at $9,640 with most homeowners paying $3,071–$16,209, Fixr prices the average range at $5,000–$20,000 with most people paying around $10,000 for a 10-by-40-foot backyard greenhouse, and HomeGuide prices greenhouses at $5–$30+ per square foot for labor and materials, or $2,500–$15,000 for a 500-square-foot structure. The $5,000–$16,200 typical band is the honest overlap of Angi's and Fixr's average ranges — a standard professionally installed residential greenhouse, freestanding or attached, for growing plants — and $9,600 is Angi's $9,640 average rounded, sitting just under Fixr's $10,000 typical figure; a small hoop or prefab kit costs far less, and a large heated, glass or custom greenhouse costs far more.
typical
$5,000$16,200
Low end = minor scope  ·  marker = typical middle  ·  high end = major scope. Add 10–20% contingency to any budget.
Clear-panel garden greenhouse beside raised beds with watering cans in front

Greenhouse Installation cost at a glance

  • Typical range: $5,000 – $16,200
  • Most homeowners pay: around $9,600
  • Prices vary most by: Structure materials — frame and glazing (45–60% of the budget)

Cross-checked against three published sources for this project. Sources used for this page: Angi's greenhouse cost guide (updated October 16, 2026: national average $9,640, most homeowners paying $3,071–$16,209; basic kits $1,000–$5,000, custom wood $6,000–$15,000, commercial-grade $15,000–$25,000+; $10–$35 per square foot; 50 sq ft $1,000–$3,500, 100 sq ft $3,000–$8,000, 200 sq ft $7,000–$12,000, 500 sq ft $10,000–$25,000; site prep $500–$5,000; permits $100–$1,000; professional install total $5,000–$25,000), HomeGuide's greenhouse cost guide (updated July 29, 2025: $5–$30+ per square foot for labor and materials, materials $3–$18 per square foot, labor $2–$12 per square foot and about 40% of the total; $2,500–$15,000 for a 500-square-foot structure; hoop $5–$10, lean-to $10–$25, A-frame/barn/post-and-rafter $25–$35, solar $30–$45 per square foot; glazing plastic $0.10–$0.70, polycarbonate $1.50–$3.00, glass $2.50–$3.50 per square foot; install labor $50–$100 per hour; regrading $500–$5,000) and Fixr's greenhouse cost guide (average range $5,000–$20,000, most people paying around $10,000 for a 10-by-40-foot backyard greenhouse; low $1,000 for a 10-by-20-foot hoop greenhouse, high $35,000 for a heated, ventilated commercial-style 20-by-100-foot greenhouse; $5–$35 per square foot; hoop $5–$10, lean-to $10–$25, A-frame $25–$35, solar $35–$45, unheated $5–$35 vs heated $35–$45 per square foot). Sources last checked: October 2026 — HomeGuide, Fixr, Angi. How we calculate these costs

Cost by scope

Greenhouse Installation cost ranges by scope — chart of the table below
ScopeTypical costWhat it includes
Small hoop or prefab kit — the budget route$1,000 – $5,000The cheap end: Angi prices basic kits at $1,000–$5,000 and small prefabricated builds from about $1,000, Fixr prices its low end at $1,000 for a 10-by-20-foot hoop greenhouse, and HomeGuide and Fixr both price hoop houses at $5–$10 per square foot — PVC hoops or a light metal frame under plastic sheeting, no foundation beyond level ground, no heating or plumbing, which is why it prices well below a rigid, installed greenhouse
Standard residential greenhouse — the typical job$5,000 – $16,200The shared band itself: Angi prices most builds at $3,071–$16,209 with a $9,640 average and custom wood greenhouses at $6,000–$15,000, Fixr prices the average range at $5,000–$20,000, and HomeGuide prices a 500-square-foot structure at $2,500–$15,000 — a mid-size freestanding or lean-to greenhouse in aluminum or wood with polycarbonate or glass glazing, a proper base, and basic ventilation, which is the common job and the band this page is built on
Large, heated or custom glass greenhouse — the top end$16,200 – $35,000The expensive end: Angi prices larger custom designs at $25,300 or more and commercial-grade structures at $15,000–$25,000+, Fixr prices its high end at $35,000 for a heated, ventilated commercial-style greenhouse measuring 20 by 100 feet, and HomeGuide and Fixr both price solar and heated styles at $35–$45 per square foot — a large glass or rigid-panel greenhouse with heating, ventilation, irrigation and electrical work, where the systems, not the frame alone, set the price

Where the money goes

Part of the jobShareNote
Structure materials — frame and glazing45–60% of totalThe largest line in every guide: HomeGuide prices materials at $3–$18 per square foot against a $5–$30 total, and prices glazing from $0.10–$0.70 per square foot for plastic sheeting and $1.50–$3.00 for polycarbonate up to $2.50–$3.50 for glass — frame material (PVC cheapest, aluminum and wood mid-range, steel strongest) and glazing choice move this line more than any other
Installation labor30–40% of totalHomeGuide puts labor at about 40% of the total cost and prices installation labor at $50–$100 per hour, while Angi prices greenhouse builders at $50–$100 per hour and $2,000–$10,000 per project for site prep, assembly, glazing and ventilation — a kit assembled on level ground sits at the bottom of that band, while a custom rigid build with glazing and systems sits at the top
Site prep, foundation, flooring and permits5–15% of totalThe groundwork layer that a permanent greenhouse cannot skip: Angi prices site prep at $500–$5,000 and permits at $100–$1,000, HomeGuide prices regrading or leveling at $500–$5,000 and notes that an attached greenhouse typically requires a foundation and footings while a small freestanding hobby greenhouse may need no more than level ground — a sloped or uncleared lot pushes this share up
Climate control, utilities and extras5–15% of totalZero on an unheated seasonal greenhouse, and the reason heated year-round jobs cost more: HomeGuide prices circulation fans at $20–$500+ each, space heaters at $40–$300+ each, a misting system at $200–$2,000+ before installation, a new water line at $500–$900 per run, and running power at $10–$25 per foot underground — ventilation, heating, watering and lighting are the lines most often added after the structure quote
Structure materials — frame and glazing · 45–60%Installation labor · 30–40%Site prep, foundation, flooring and permits · 5–15%Climate control, utilities and extras · 5–15%
Estimator’s note: on a greenhouse installation, structure materials — frame and glazing is usually where quotes swing most (45–60% of total of a typical budget). Ask every contractor to itemize that line in writing — totals are only comparable when that part is.
A small rigid-panel greenhouse on a lawn: installation labour is 30–40% of a greenhouse total, and a kit assembled on level ground sits at the bottom of that band, while a custom rigid build with glazing and systems sits at the top
A small rigid-panel greenhouse on a lawn: installation labour is 30–40% of a greenhouse total, and a kit assembled on level ground sits at the bottom of that band, while a custom rigid build with glazing and systems sits at the top

What moves the price most

Size is the first driver: Angi prices greenhouses at $10–$35 per square foot and shows the step-up plainly — about $1,000–$3,500 for 50 square feet, $3,000–$8,000 for 100, $7,000–$12,000 for 200, and $10,000–$25,000 for 500 — while Fixr prices the same spread at $5–$35 per square foot, so doubling the footprint nearly doubles the total even though larger builds can save a little per square foot. Style and glazing are second: all three guides agree hoop houses are cheapest at $5–$10 per square foot, lean-to and dome styles sit at $10–$25, A-frame, barn and post-and-rafter styles at $25–$35, and solar and heated styles at $30–$45 to $35–$45, with plastic sheeting cheapest and shortest-lived, polycarbonate the mid-range workhorse, and glass the most expensive with the best light transmission. Heating and year-round use are third — Fixr prices unheated greenhouses at $5–$35 per square foot against $35–$45 for heated ones, because a heated house needs insulation, an airtight build and real heating equipment, not just a heater plugged in. Finally, site and permits decide the surprises: a greenhouse needs level ground, Angi and HomeGuide both budget $500–$5,000 for grading or leveling, Angi budgets $100–$1,000 for permits, and a permanent structure or one with electrical or plumbing connections is the one that triggers permitting — a small seasonal hoop house often does not.

Work out your quantities: before you compare quotes, run your measurements through our free remodeling calculators (paint, tile, concrete and flooring) — each one shows its formula and runs entirely in your browser.

Costs in your city

Labor is the biggest variable in any remodel, and labor is local — the same bathroom can price very differently in Houston than in Boston. We are adding city editions metro by metro, each with its own labor index, permit notes and climate factors, written for that city rather than copied from this page. Wave 1: Houston, Dallas–Fort Worth, Phoenix, Atlanta, Miami–South Florida, Orlando, Tampa, Charlotte, Austin and San Antonio. Until your city's page is live, use the national range here and weight it the way contractors do: Sun Belt labor often prices near or below the national middle, while coastal California and the Northeast metros often price well above it.

How this estimate was built: the range on this page is a synthesis of at least three published industry sources (national cost guides and the Remodeling Magazine Cost vs. Value data among them), cross-checked in October 2026. We publish planning ranges, never a single pretend-precise price. Full method: How We Estimate Costs.
The arched, hoop-house end of the family: hoop houses are priced at $5–$10 per square foot in all three guides, which is why the small hoop or prefab kit tier on this page starts at $1,000 — plastic sheeting is cheapest and shortest-lived, against polycarbonate at $1.50–$3.00 and glass at $2.50–$3.50 per square foot
The arched, hoop-house end of the family: hoop houses are priced at $5–$10 per square foot in all three guides, which is why the small hoop or prefab kit tier on this page starts at $1,000 — plastic sheeting is cheapest and shortest-lived, against polycarbonate at $1.50–$3.00 and glass at $2.50–$3.50 per square foot

Frequently asked questions

How much does it cost to install a greenhouse?

Most standard residential greenhouses land in the $5,000–$16,200 band on this page, with a common middle around $9,600. A small hoop or prefab kit can come in below that band, and a large heated or custom glass greenhouse usually lands above it.

How much does a greenhouse cost per square foot?

Published guides overlap at about $10–$30 per square foot for standard residential work — Angi prices $10–$35, Fixr $5–$35, and HomeGuide $5–$30+ — with hoop houses at $5–$10 at the bottom and heated or solar styles at $35–$45 at the top. Use the rate as a planning check on quotes, not as a quote itself, since glazing and heating move it more than area alone.

Do I need a permit to install a greenhouse?

Often yes for a permanent structure, and almost always when it has electrical or plumbing connections — Angi budgets $100–$1,000 for permits, and HomeGuide notes that permits, and possibly an engineer's stamp, depend on size and location, with rural areas typically having fewer restrictions. A small temporary hoop house is the least likely to need one, but confirm with your building department before building a rigid or attached greenhouse.

How long does it take to build a greenhouse?

HomeGuide puts the build at 1–3 days up to several weeks depending on size and type, with simple or ready-to-assemble greenhouses fastest and custom-built greenhouses with complex structural designs slowest. Permitting, site prep and material lead time, not just assembly, usually set the calendar.

Is a greenhouse different from a sunroom or patio cover?

Yes — this page prices a growing structure, freestanding or attached, built to trap sun and protect plants, not a finished living space. A sunroom or patio cover is priced on this site as its own job, with finished floors, insulation and house-grade wiring; a greenhouse is priced on its frame, glazing and growing systems, which is why even a large greenhouse costs far less than a comparable room addition.

Before you sign: get at least 3 written local quotes for the same written scope, confirm permits and who pulls them, and keep a 10–20% contingency separate from the contract price.

Ahsan ul Haq — Editor, Remodel Cost Hub

Ahsan compiles and edits the cost guides on Remodel Cost Hub, cross-checking every range against at least three published sources before it is published — the full method is on our Methodology page. Spot an error on this page? Send a correction.

Greenhouse Installation cost range graphic
Save this range for later: Pin it on Pinterest

Related cost guides

Two-storey house with a full-width open front porch on columns, railings and a wood deck

Front Porch Installation Cost

$6,000 – $18,000

Front porch installation typically costs $6,000 – $18,000, with about $12,000 the figure most standard jobs land near — HomeGuide prices a front porch at $6,000–$18,000 or $40–$120 per square foot, Angi prices an open porch at the same $40–$120 per square foot with a 150-square-foot porch at $6,000–$18,000, and LawnLove prices a 200-square-foot porch at $14,400 on average with most homeowners paying $4,800–$24,000. The $6,000–$18,000 typical band is the HomeGuide front-porch band, corroborated square foot for square foot by Angi's open-porch rate, and $12,000 is the midpoint of that band — a standard open front porch of about 150 square feet with a roof, columns, railings and steps; a small entry porch costs far less, and a wraparound or farmer's porch costs far more.

Patterned metal sliding driveway gate on a paved drive, opener motor visible at its base

Driveway Gate Installation Cost

$2,400 – $8,000

Driveway gate installation typically costs $2,400 – $8,000, with about $4,000 the figure most standard jobs land near — Angi prices automatic gate installation at $4,000 on average with most homeowners paying $2,380–$8,000, Fixr prices a driveway gate at $1,000–$6,000 on average with most homeowners paying $4,000 for an installed 12-by-6-foot automatic double wooden swinging gate, and HomeGuide prices automatic driveway gates at $1,600–$13,000 installed with most people spending about $7,000 for the gate, opener and installation. The $2,400–$8,000 typical band is Angi's automatic-gate band, inside HomeGuide's wider span and overlapping Fixr's automatic $2,500–$5,000 band, and $4,000 is the average both Angi and Fixr publish — a standard automatic driveway gate, single or double swing or sliding, with a motor, keypad or remote and professional installation; a manual gate costs far less, and a custom security build costs far more.

Orange wooden double gates standing open in front of a modern villa

Gate Opener Installation Cost

$1,200 – $3,500

Gate opener installation typically costs $1,200 – $3,500 for a standard operator fitted to a gate that already exists, with about $2,500 the figure most standard systems land near. This guide prices the operator and its installation only — the gate leaf, posts and driveway are already there; a brand-new gate is our driveway gate installation guide.

Wood gate leaf with a steel handle set in a horizontal-board wood fence beside a house

Fence Gate Installation Cost

$300 – $800

Fence gate installation typically costs $300 – $800 for a standard single walk gate, with about $500 the figure most jobs land near — the overlap where HomeGuide's vinyl gate band ($150–$780 installed), its aluminum gate band ($450–$1,000) and its chain-link walk-through band ($130–$450 installed) meet. Angi's much higher city averages, around $2,000, are published for a broader gate category that includes driveway and automatic gates, and are flagged as such below rather than averaged in.

Freeform pool with a round stone spa set in a stamped-concrete surround

Pool Deck Installation Cost

$5,000 – $12,000

Pool deck installation typically costs $5,000 – $12,000, with about $5,000 the figure most standard jobs land near — Angi prices an aboveground pool deck at a national average of $5,000 with most homeowners spending $3,000–$12,000, HomeGuide prices a pool deck at $25–$50 per square foot or $5,000–$20,000 total for 200–400 square feet, and DeckCostGuide prices a raised wood pool deck at $25–$70 and a raised composite deck at $40–$80 per square foot. The $5,000–$12,000 typical band is Angi's most-common band, inside HomeGuide's wider total, and $5,000 is Angi's published average — a ground-level concrete or paver surround costs far less, and a large premium deck costs far more.

Aerial view of a backyard inground pool with an attached spa

Pool Heater Installation Cost

$1,900 – $4,500

Pool heater installation typically costs $1,900 – $4,500 for a standard inground pool, with about $3,100 the figure most jobs land near — Angi averages $3,100 across 1,019 verified projects with most at $1,864–$4,351, HomeGuide averages $3,300 with a range of $1,600–$5,200, and HomeGnome puts the installed range at $1,670–$4,410. The heater, labor, hookup lines, permits and old-heater removal below are all inside the total, while the monthly running cost — gas $200–$400 in Angi, heat pump $120–$200 — is not, and is published separately so it is not mistaken for part of the install price.