Fire Pit Installation cost at a glance
- Typical range: $325 – $2,000
- Most homeowners pay: around $850
- Prices vary most by: Materials — kit or block, fire brick, liner & base aggregate (40–55% of the budget)
Cross-checked against two published sources for this project. Sources used for this page: the Angi fire pit installation cost guide, HomeGuide's fire pit cost guide and Lawn Love's fire pit cost data. Sources last checked: October 2026 — HomeGuide, Angi. How we calculate these costs
Cost by scope

| Scope | Typical cost | What it includes |
|---|---|---|
| Kit assembled on an existing patio | $200 – $900 | The floor of the market: a prefab stone or block kit with a metal liner, assembled on a level patio or gravel pad with no excavation and no fuel line. Angi and Lawn Love both price a 36-inch installed pit at $200–$900, and HomeGuide puts the kit itself at $200–$700 in materials. |
| Built paver or stone pit, wood-burning — the typical job | $500 – $2,000 | The typical project on this page: a custom built-in of concrete block, pavers or brick with a fire-brick interior and steel ring, on a levelled gravel base. HomeGuide prices custom built-ins at $325–$2,000 (44-inch $500–$1,700, 48-inch $600–$2,000); Angi's material table runs brick at $300–$2,200 and stone at $350–$3,000 for a 36-inch pit. |
| Natural-gas or in-ground custom build | $3,500 – $5,000 | A permanent gas pit or an in-ground pit built into an existing patio, with licensed gas work. HomeGuide prices a permanent natural-gas installation at $3,500–$8,000 all-in, while Angi caps an in-ground pit built into an existing patio at up to $5,000 — this tier publishes the overlap of the two, and a long gas run can still push past it. |
Where the money goes
| Part of the job | Share | Note |
|---|---|---|
| Materials — kit or block, fire brick, liner & base aggregate | 40–55% | The physical pit: HomeGuide prices custom materials at $200–$1,700 — concrete blocks $80–$300, fire brick $150–$450, natural stone $290–$3,400 — before labour is added |
| Installation labour | 40–50% | Angi puts labour at roughly 50% of a standard project's cost ($400–$500 on an average job) and Lawn Love says installation is half its $830 average; HomeGuide's $125–$300 labour line covers simpler handyman block builds, which is why the share is published as a range |
| Site prep & base — levelling, gravel or sand bed | 5–15% | Minor prep on a ready site. Significant prep is priced separately by the guides — HomeGuide lists yard levelling at $500–$1,000 and drainage for sunken pits at $1,000–$4,000 — and is never inside the typical band |

What moves the price most
Size is the first price. Angi's ladder runs a 36-inch pit at $200–$900 and a 48-inch at $250–$2,000 installed; HomeGuide's hand-built table reaches $1,300–$4,500 at 72 inches. Material sets the middle: for a 36-inch pit Angi prices concrete at $200–$1,000, brick at $300–$2,200 and stone at $350–$3,000. Fuel is where quotes split. Wood ($300–$1,000) and propane ($300–$950) sit close together in Angi, but a natural-gas line is billed by the foot — $15–$25 per linear foot in Angi, $15–$50+ in HomeGuide — and HomeGuide's all-in gas total of $3,500–$8,000 includes that licensed work. Permits vary from nothing to $500 (Angi's published span is $20–$500), and most places require no permit for the pit itself. The base is not free: a pit on an existing patio skips the levelling ($500–$1,000 in HomeGuide) that a lawn site needs first.
Worked example: how a typical fire pit installation budget breaks down
Take the typical job — a 44-inch block built-in with a fire-brick interior and steel ring, wood-burning, on a levelled gravel base in an existing backyard. Here is a realistic $850 version of that invoice, at Angi's $850 average and beside Lawn Love's $830: The budget below totals $850 — the "most homeowners pay around" figure from the top of this page — split using this page's own cost breakdown. It shows how a real quote at that level is usually composed; every line is built from the ranges on this page, and it is an illustration, not a quote for your project.
| Line item | Example budget |
|---|---|
| Materials — blocks, fire brick, steel liner & base aggregate | $400 |
| Installation labour — layout, levelling & build | $380 |
| Permit & delivery share | $70 |
| Total | $850 |
What most people get wrong
- Comparing a kit price with a built-in quote. HomeGuide's $200–$700 kit is materials only; its custom built-in at $325–$2,000 includes the $125–$300 labour line — the cheaper number is a smaller product, not a better price.
- Quoting a gas pit without the gas line. The line runs $15–$25 a foot in Angi and $15–$50+ in HomeGuide before the pit itself is priced; a gas quote with no line item is an unfinished quote.
- Siting the pit before checking clearances. Angi recommends 10 to 25 feet from structures and HomeGuide 15 to 30 feet for wood-burning pits — a pit built inside the clearance is a pit that gets moved or removed.
- Lighting the first fire on fresh mortar. HomeGuide gives mortar and adhesive about a week to cure on brick and stone-block builds; an early hot fire can crack a joint that would have lasted decades.
Costs in your city
Fire pit prices follow local labour rates and local fire rules together. Angi's labour share — roughly half the project, $400–$500 on an average job — is priced at handyperson rates of $60–$125 an hour, so high-wage metros land high in the $325–$2,000 band while handyman-built block pits in lower-cost markets sit near HomeGuide's $125–$300 labour line. Regulation is the second local variable: permit budgets run $20–$500 in Angi, dry and high-fire-risk regions add setback and seasonal burn rules that can decide whether a wood pit is allowed at all, and gas work always needs a locally licensed installer at $45–$200 an hour in Angi's rate table. Ask each installer whether the quote includes the base, the liner and any permit, and city quotes become comparable line by line.
How we got these numbers
Cross-checked against the Angi fire pit installation cost guide (average $850; overall $200–$3,000; 36-inch $200–$900; labour roughly 50% of the project; gas line $15–$25 per linear foot; permits $20–$500), HomeGuide's fire pit cost guide — opened and read in full this run (custom built-in $325–$2,000 with materials $200–$1,700 and labour $125–$300; permanent natural gas $3,500–$8,000; gas line $15–$50+ per foot) and Lawn Love's fire pit cost data (national average $830, typical $250–$2,200, installation about half the total). Angi and Lawn Love publish near-identical size and material tables, so those sub-tables are treated as one dataset, not two; HomeGuide is the independent check. The breakdown shares are derived from the guides' published dollar splits — none of the three publishes a percentage table — and the gas disagreement is published as a split, never averaged away.

Frequently asked questions
How much does it cost to install a fire pit?
Angi averages $850 across its projects with a $200–$3,000 overall span, Lawn Love averages $830 inside $250–$2,200, and HomeGuide prices a custom built-in at $325–$2,000. This page publishes the three-guide overlap of $325–$2,000 for a standard permanent pit on a ready base, with most homeowners paying about $850.
How much does a gas line for a fire pit cost?
By the foot: $15–$25 per linear foot in Angi, $14–$25 in Lawn Love and $15–$50 or more in HomeGuide, which puts a complete grill or fire-pit gas line at $600–$1,300 on average. Gas work must be done by a licensed professional in every guide — it is the one part of this project that is never a DIY line.
Do I need a permit for a fire pit?
Usually not for the pit itself, according to HomeGuide, but gas-line and fire-safety permits or inspections can apply, and rules on size and placement vary widely by municipality — Angi budgets $20–$500 where a permit is needed. Check the local rules before the build, not after the first fire.
How far should a fire pit be from the house?
Angi recommends 10 to 25 feet from the house and other structures; HomeGuide specifies 10 to 15 feet for gas pits and 15 to 30 feet for wood-burning ones. Local code controls where the two differ, and the clearance is measured before the pit is sited, not negotiated afterwards.
Can I build a fire pit myself, and how long does it last?
A simple wood-burning kit is the classic DIY version of this project — $150–$300 in materials and tools in Lawn Love, $200–$650 in HomeGuide — saving roughly the labour half of a pro price. HomeGuide notes most 3 to 4-foot paver or stone builds take 2 to 6 hours to assemble but mortar or adhesive needs about a week to cure before the first fire, and lifespan runs from a few years for thin coated steel to effectively permanent for stone.






