Home › Cost Guides › Tile and Grout Cleaning
Cost Guide

How Much Does Tile and Grout Cleaning Cost? (2026)

By Ahsan ul Haq · Last updated: 11 November 2026 · Planning estimate — not a quote · How we estimate

Typical range
$285 – $675
Most homeowners pay around $480 · The typical project is a professional machine clean of the main tiled areas of a home — kitchen, bathrooms and entry — at about $0.50 – $3 per sq ft in Angi. A single small bathroom, grout sealing and damaged tile are tiered or noted separately below; new tile is priced on the tile flooring page.
typical
$285$675
Low end = minor scope  ·  marker = typical middle  ·  high end = major scope. Add 10–20% contingency to any budget.
Black and white checkered tile floor with visible grout lines and ground-in grime

Tile and Grout Cleaning cost at a glance

  • Typical range: $285 – $675
  • Most homeowners pay: around $480
  • Per square foot: $0.50 – $3 per sq ft
  • Prices vary most by: Machine cleaning labor (55–70% of the budget)

Cross-checked against three published sources for this project. Sources used for this page: the Angi tile and grout cleaning cost guide, HomeGuide's tile and grout cleaning cost data and Thumbtack's grout cleaning cost data. Sources last checked: October 2026 — HomeGuide, Angi, Thumbtack. How we calculate these costs

Cost by scope

Tile and Grout Cleaning cost ranges by scope — chart of the table below
ScopeTypical costWhat it includes
One bathroom or a small tiled area$100 – $285Angi carries a $100–$200 minimum charge and prices a 60 sq ft bathroom at $30–$180 on its per-foot rate before the minimum bites — small jobs pay for the truck and the machine, not the footage. Hand work in a shower enclosure prices at the top of this tier.
Main tiled areas of an average home — the typical job$285 – $675The typical project on this page. Angi averages $480 across 7,656 verified projects with most homeowners paying $285–$676 at $0.50–$3 per square foot; HomeGuide prices tile and grout cleaning at $250–$700 and $0.50–$3.50 per square foot; Thumbtack's grout cleaning data runs $320–$764 with most people paying around $491.
Whole-home tile, heavy staining or sealing included$675 – $1,400Thumbtack's high end reaches $1,398, and Angi budgets an additional $150–$500 when grout sealing, tile repairs or mold treatment join the clean. Large-format square footage, small tiles with dense grout lines and the sealer itself are what is being bought in this tier.

Where the money goes

Part of the jobShareNote
Machine cleaning labor55–70%The technician, the rotary or steam machine and the extraction rinse are the product — Thumbtack describes the professional process as chemical suspension, machine agitation and vacuum extraction, priced per square foot because time follows area
Grout detail & hand work15–25%Showers, corners and small-format tile cannot be machine-run: Thumbtack prices hand cleaning at $30–$50 an hour against roughly $0.75 per square foot by machine, and Angi notes smaller tiles mean more grout lines and more time
Grout sealing8–18%The optional finish that keeps the clean: Angi folds sealing into its $150–$500 add-on band with repairs and mold treatment, and sealed grout is what slows the next discoloration cycle
Solutions, equipment & travel5–10%Alkaline and acid-side cleaners by tile type, brushes, the machine's wear — and the $100–$200 minimum charge in Angi that a one-bathroom job is mostly paying
Machine cleaning labor · 55–70%Grout detail & hand work · 15–25%Grout sealing · 8–18%Solutions, equipment & travel · 5–10%
Estimator’s note: on tile and grout cleaning, machine cleaning labor is usually where quotes swing most (55–70% of a typical budget). Ask every contractor to itemize that line in writing — totals are only comparable when that part is.
The professional process in Thumbtack is chemical suspension, machine agitation and an extraction rinse — priced at $0.75–$3 per square foot for machine work.
The professional process in Thumbtack is chemical suspension, machine agitation and an extraction rinse — priced at $0.75–$3 per square foot for machine work.

What moves the price most

Square footage is the unit. Angi prices $0.50–$3 per square foot, HomeGuide $0.50–$3.50 and Thumbtack $0.75–$3 — measure the tiled area, not the room, and the three datasets reconcile. Grout-line density is the hidden multiplier: Angi notes smaller tiles cost more time because there is more grout per square foot; a mosaic shower wall and a large-format kitchen floor are different jobs at the same footage. Condition sets the chemistry — years of soap film, hard-water scale or mold move a job from a standard alkaline clean to treatment work, which Angi prices inside its $150–$500 add-on band. Tile material limits the method: ceramic and porcelain take machine and steam work; natural stone and old, soft grout need gentler products and hand work at Thumbtack's $30–$50 hourly rate. Sealing is a separate decision — cleaning without sealing re-soils on the old schedule, which is why the sealing line is worth pricing explicitly rather than discovering at the door.

Work out your quantities: before you compare quotes, run your measurements through our free remodeling calculators (paint, tile, concrete and flooring) — each one shows its formula and runs entirely in your browser.

Worked example: how a typical tile and grout cleaning budget breaks down

Take the typical job — a professional machine clean of a kitchen floor, two bathrooms and an entry, about 250 sq ft of tile, with the shower grout detailed by hand. Here is a realistic $480 version of that invoice, Angi's published average: The budget below totals $480 — the "most homeowners pay around" figure from the top of this page — split using this page's own cost breakdown. It shows how a real quote at that level is usually composed; every line is built from the ranges on this page, and it is an illustration, not a quote for your project.

Line itemExample budget
Machine cleaning — floors, about 250 sq ft$290
Grout detail & shower hand work$95
Grout sealing$60
Solutions, equipment & travel$35
Total$480

What most people get wrong

  • Expecting cleaning to fix damaged tile. Cracked glaze, hollow tiles and crumbling joints are repair work — Angi prices repairs in a separate $150–$500 add-on band. A cleaner who promises a clean will restore damaged tile is selling the visit, not the result.
  • Comparing a per-foot quote with a flat quote blind. They should reconcile at $0.50–$3 per square foot in Angi, $0.75–$3 in Thumbtack. A flat bid that cannot be restated per foot has not been measured.
  • Skipping the sealing decision until the crew arrives. Sealing is the line that stretches the result — price it in the quote, where it competes, not at the door, where it does not.
  • Booking a machine rate for a hand-work job. Small mosaic tiles and shower walls price at Thumbtack's $30–$50 hourly hand rate, not the $0.75 machine rate. A per-foot quote on a mosaic shower is underpriced by design and gets revised on site.

Costs in your city

Tile and grout cleaning is machine time plus local labor, so the same 250 sq ft prices near Angi's $285 floor where wages are low and toward HomeGuide's $700 top in high-cost metros. Water writes the local scope: hard-water regions grow the scale that adds treatment time, humid regions grow the mold that Angi prices inside its $150–$500 add-on band, and both shorten the interval from HomeGuide's 6-to-12-month cycle toward the 6-month end. Housing stock matters too — older homes carry the small-format tile and dense grout lines that Angi warns cost more time per square foot. The quote to trust anywhere names the footage, the method per surface and the sealing line, because $0.50–$3 a square foot is the band every honest bid reconciles to.

How we got these numbers

Cross-checked against the Angi tile and grout cleaning cost guide (national average $480 across 7,656 verified projects, most homeowners paying $285–$676; $0.50–$3 per square foot; $100–$200 minimums; sealing, repairs and mold treatment adding $150–$500), HomeGuide's tile and grout cleaning cost data ($250–$700 per visit; $0.50–$3.50 per square foot; 6-to-12-month service cycle) and Thumbtack's grout cleaning cost data (national range $320–$764, most people paying around $491; $0.75–$3 per square foot; hand cleaning $30–$50 an hour). The typical band published here is Angi's most-homeowners range, contained in both other datasets; the most-pay figure is Angi's verified average. Checked October 2026. Full method: How We Estimate Costs.

Cleaning cannot fix this — cracked glaze and failing joints are repair work, which Angi prices as a separate $150–$500 add-on band, not part of a clean.
Cleaning cannot fix this — cracked glaze and failing joints are repair work, which Angi prices as a separate $150–$500 add-on band, not part of a clean.

Frequently asked questions

How much does tile and grout cleaning cost on average?

Angi averages $480 across 7,656 verified projects, with most homeowners paying $285–$676. HomeGuide prices the service at $250–$700, and Thumbtack's grout cleaning data runs $320–$764 with most people paying around $491. Budget about $480 for the main tiled areas of an average home.

How much does it cost per square foot?

Angi prices $0.50–$3 per square foot with a $100–$200 minimum charge, HomeGuide $0.50–$3.50 per square foot, and Thumbtack $0.75–$3 per square foot for machine work — hand cleaning of showers and detail areas runs $30–$50 an hour in Thumbtack instead.

Is professional tile and grout cleaning worth it?

When the grout itself is discolored, yes: grout is porous, and the dirt a mop redistributes is embedded below the surface the mop reaches. The professional process in Thumbtack — chemical suspension, machine agitation, extraction rinse — removes what surface cleaning moves around. For a floor whose grout is still its original color under a dirty film, a rented machine at a fraction of the price is the honest alternative.

How often should tile and grout be professionally cleaned?

HomeGuide's maintenance schedule puts tile and grout cleaning on a 6-to-12-month cycle at $250–$700 a visit. Kitchens and entryways on the annual end, showers — where soap and moisture work daily — on the shorter end, and sealed grout stretches every interval.

Can cleaning fix cracked or damaged tile?

No. Cleaning removes soil from tile and grout; it does not repair cracked glaze, hollow tiles or failing grout joints. Angi prices tile repairs and mold treatment as separate work adding $150–$500, and a floor with widespread cracking is a repair or replacement question — the tile flooring page prices new tile — not a cleaning one.

Before you sign: Measure the tile, name the method per surface, and decide the sealing before the crew arrives — the $480 clean is a scope. — The RemodelCostHub Editors

Ahsan ul Haq — Editor, Remodel Cost Hub

Ahsan compiles and edits the cost guides on Remodel Cost Hub, cross-checking every range against at least three published sources before it is published — the full method is on our Methodology page. Spot an error on this page? Send a correction.

Tile and Grout Cleaning cost range graphic
Save this range for later: Pin it on Pinterest

Related cost guides

Kitchen cabinets finished in deep blue paint with patterned tile backsplash

Cabinet Painting Cost

$1,000 – $6,500

Professional cabinet painting, average kitchen — about $30–$70 per linear foot across the published guides

Glass-enclosed tiled shower with a rain showerhead and a handheld showerhead

Shower Repair Cost

$150 – $750

A shower repair typically costs $150 – $750, with about $400 the most-pay figure — Modernize puts most shower repairs in that $150–$750 band with many common jobs at $300–$500, Angi prices fixing a bathroom leak at $150–$600, and HomeAdvisor prices shower or tub faucet repair at $75–$200. The $400 most-pay figure sits inside Modernize's common-jobs band; small drip and clog jobs land below the band and pan, tile or behind-wall work lands above it.

Large jetted garden bathtub set into a tiled deck under a glass-block window

Bathtub Repair Cost

$100 – $600

A bathtub repair typically costs $100 – $600, with about $300 the most-pay figure — HomeGuide puts surface repairs at $100–$600 on average, Angi prices a chipped bathtub repair at $195–$300, and This Old House prices refinishing at $335–$630 with a $480 national average. The $300 most-pay figure sits at the top of the chip-repair band and inside the surface band; a recaulk or single chip lands below it and a full refinish or plumbing repair lands above it.

Bathroom vanity with a white countertop and black faucet, toilet and alcove tub alongside

Sink Repair Cost

$100 – $500

A sink repair typically costs $100 – $500, with about $300 the most-pay figure — HomeGuide puts plumber sink repairs at $100–$500 for minor issues and up to $800+ for large resurfacing or pipe jobs, Angi prices plumbing repair at $330 on average and sink install or repair at $200–$1,500, and Thumbtack prices common sink jobs at $65–$400. The $300 most-pay figure sits near Angi's $330 plumbing-repair average; a drip or clog lands below it and a surface refinish or hidden pipe job lands above it.

Modern kitchen with a wood countertop run along the back wall and a dining table in front

Countertop Repair Cost

$200 – $800

A countertop repair typically costs $200 – $800, with about $400 the most-pay figure — HomeGuide puts countertop repair at $200–$800+ total, Angi puts most countertop repairs at about $378 inside its $100–$1,000 band, and Fixr prices most repair types at $100–$500. The $400 most-pay figure sits just above Angi's $378 average; a single chip or scratch lands below it and a granite or marble crack, a resurface or a refinish lands above it.

Bathroom vanity with a lit mirror against large gray wall tiles with visible grout joints

Grout Repair Cost

$150 – $600

A grout repair typically costs $150 – $600, with about $350 the most-pay figure — Angi puts grout repair at $50–$1,200 with a $350 national average and most homeowners paying $150–$600, HomeGuide prices grout repair at $100–$700, and Homewyse prices tile grout repair at $18.38–$40.33 per sq ft. The $350 most-pay figure is Angi's average; a few cracked joints land below it and a full regrout of a large tiled area lands above it.