Cabinet Painting cost at a glance
- Typical range: $1,000 – $6,500
- Most homeowners pay: around $2,500
- Prices vary most by: Painting labor (incl. all prep) (≈ 70–85% of the budget)
Cross-checked against four published sources for this project. Sources used for this page: the Angi cabinet painting cost guide (September 2026, 13,847 verified projects), HomeGuide's cabinet painting cost guide (2025), Engineer Fix's cabinet painting cost guide and Textbook Painting's contractor-authored cabinet refinishing guide (September 2026). Sources last checked: October 2026 — HomeGuide, Angi, Engineer Fix, Textbook Painting. How we calculate these costs
Cost by scope

| Scope | Typical cost | What it includes |
|---|---|---|
| Brush-and-roll, standard finish | $425 – $2,800 | The budget pro route — Angi's national band tops at $1,466 across 13,847 verified projects; its medium-kitchen table runs $1,500–$2,800 |
| Spray finish | $40 – $100 per linear foot | The factory-smooth finish in HomeGuide — costs more than brush-and-roll for the masking, ventilation and overspray setup |
| Specialty finish (glaze, two-tone, distress) | Add $500 – $2,000 | Angi's add-on band for glaze, distressed and two-tone work over a standard paint job |
| High-end 2K / catalyzed finish, large kitchen | $7,000 – $12,000+ | Multi-component conversion varnish or two-part polyurethane in Engineer Fix — the top tier for large kitchens |
Where the money goes
| Part of the job | Share | Note |
|---|---|---|
| Painting labor (incl. all prep) | ≈ 70–85% of total | The largest line — Angi 70–80%, HomeGuide 80–85%; prep alone (degreasing, sanding, masking, hardware removal) can account for up to half the total in Angi |
| Paint, primer & materials | ≈ 10–20% of total | $400–$1,000 in HomeGuide's pro factor table; DIY materials $200–$600 in Angi, HomeGuide and Engineer Fix alike |
| Repairs & new hardware | ≈ 2–10% of total | Cabinet repairs $120–$600 in HomeGuide; water damage or warping $200–$500+ in Angi; new hardware $6–$60 a piece installed |

What moves the price most
Cabinet type and door style set the labor. Stock cabinets ($900–$2,000 to paint in Angi) are quick, flat work; custom cabinets ($2,500–$7,000) and detailed raised-panel doors take far longer than shaker or slab. Material is second — MDF drinks primer, laminate and metal need specialty bonding primers, and stained or varnished cabinets need more prep than already-painted ones. Size is third and simplest: painters charge $30–$70 a linear foot or $100–$250 a door in Angi, so door and drawer counts are the price. Finish type is the quality lever — alkyd paints cost 15–20% more than standard in HomeGuide, and 2K/catalyzed finishes push large kitchens to $7,000–$12,000+ in Engineer Fix. Finally, application method: spray reads as new cabinetry (per Textbook Painting) but needs masking and ventilation setup that brush-and-roll does not.
Worked example: how a typical cabinet painting budget breaks down
Take the typical job — an average kitchen, 20–30 doors and drawers, sprayed satin finish: degrease and sand, prime, two sprayed coats, hardware rehung. Here is a realistic $2,500 version of that invoice, at the middle of the published professional bands: The budget below totals $2,500 — the "most homeowners pay around" figure from the top of this page — split using this page's own cost breakdown. It shows how a real quote at that level is usually composed; every line is built from the ranges on this page, and it is an illustration, not a quote for your project.
| Line item | Example budget |
|---|---|
| Painting labor (prep, spray, rehang) | $1,950 |
| Paint, primer & materials | $400 |
| Repairs & new hardware | $150 |
| Total | $2,500 |
What most people get wrong
- Skipping the degrease. Textbook Painting's warning is blunt: grease residue under the primer means peeling within a year — and Angi says prep (cleaning, degreasing, sanding, masking, hardware removal) can account for up to half of the whole project.
- Comparing a brush quote with a spray quote on the total. Spray finish runs $40–$100 a linear foot in HomeGuide against cheaper brush-and-roll — different finishes, different prices, and only the spray reads as new cabinetry.
- Using wall paint on cabinets. Engineer Fix specifies waterborne alkyds or urethane trim enamels with a proper primer — satin or semi-gloss sheen over flat — and alkyds cost 15–20% more than standard paint in HomeGuide for the durability.
- Hanging the hardware back on before the cure. Angi gives paint up to a month to fully cure before normal use — early reassembly risks the damage a repaint was bought to fix.
Costs in your city
Cabinet painting is painter-labor pricing around commodity paint: Angi prices pros at $20–$60 an hour and HomeGuide at $25–$75, so the same 25-door kitchen quotes near the bottom of the band where painter rates are low and toward the top in a high-cost metro, while the gallons cost the same everywhere. Humidity stretches dry and cure times in Gulf and coastal markets; high-altitude dry markets cure faster but dust more between coats. Local kitchen size matters too — markets with bigger newer kitchens price more large-kitchen jobs ($2,800–$5,000+ in Angi's size table). Get the paint system named in writing (primer plus finish type) and confirm whether doors are sprayed or brushed before comparing quotes.
How we got these numbers
Cross-checked against the Angi cabinet painting cost guide — read in full this run, September 2026 (13,847 verified projects: typical $425–$1,466, most homeowners paying $942; small kitchen $900–$1,500, medium $1,500–$2,800, large $2,800–$5,000+; $30–$60 a linear foot; $100–$250 a door; labor 70–80% of the total; prep up to half; DIY materials $200–$600; repaint every 8–12 years; up to a month to fully cure), HomeGuide's cabinet painting cost guide — read in full this run, 2025 (professional total $2,000–$6,500; $30–$70 a linear foot; $70–$125 a door; labor 80–85%; materials $400–$1,000; repairs $120–$600; new hardware $6–$60 a piece; spray $40–$100 a linear foot) and Engineer Fix's cabinet painting cost guide — read in full this run (small kitchen $1,000–$4,000; medium $4,000–$7,000; large $7,000–$12,000+; 2K/catalyzed finishes at the top; waterborne alkyds or urethane trim enamels recommended), with Textbook Painting's contractor-authored refinishing guide (September 2026: full-kitchen refinishing $5,000–$8,000; Milesi 2K polyurethane; skipped prep means peeling within a year) as corroboration. Genuine disagreements are published as-is: the national totals (Angi most $942 vs HomeGuide $2,000–$6,500 — Angi's mix carries many smaller jobs) and the per-door band ($100–$250 vs $70–$125). Breakdown shares are derived from the guides' published labor shares and dollar figures and are labelled as derived on the page. Checked October 2026. Full method: How We Estimate Costs.

Frequently asked questions
How much does it cost to paint kitchen cabinets?
$1,000–$6,500 is the typical band for a professional job on an average kitchen, and most homeowners pay about $2,500. Angi's 2026 data runs lower — most paying $942 across 13,847 verified projects — because its mix carries many smaller jobs; HomeGuide publishes $2,000–$6,500. The page names that disagreement honestly.
What does cabinet painting cost per linear foot?
$30–$70 a linear foot across Angi, HomeGuide and Engineer Fix (spray finish $40–$100 in HomeGuide). Per door: $100–$250 in Angi, $70–$125 in HomeGuide.
Is it cheaper to paint or replace kitchen cabinets?
Far cheaper to paint: HomeGuide prices painting at $2,000–$6,500 against refinishing $1,500–$4,500, refacing $5,000–$13,000 and full replacement $4,500–$15,000 — painting costs 60–70% less than refacing or replacement.
Brush-and-roll or spray for cabinets?
Brush-and-roll is cheaper and less setup; spray gives the factory-smooth finish that reads as new cabinetry (per Textbook Painting) but needs masking, ventilation and overspray control that add to the bill (per Engineer Fix).
How long do painted cabinets last?
8–15 years professionally painted with proper maintenance in HomeGuide; 8–12 in Angi. Angi adds a timing note: paint needs up to a month to fully cure before hardware goes back on and normal use resumes.
Can I paint my own cabinets?
Materials run $200–$600 in Angi, HomeGuide and Engineer Fix — the saving is the labor. The cost is time: 20–40+ hours in Angi up to 40–100 in Engineer Fix. Textbook Painting's warning: skip the degrease and the finish can peel within a year.






