Basement Bathroom Addition cost at a glance
- Typical range: $10,000 – $18,000
- Most homeowners pay: around $12,500
- Prices vary most by: Plumbing and drainage (35–50% of the budget)
Cross-checked against two published sources for this project. Sources used for this page: Angi's basement bathroom addition guide, updated Jul 9, 2026 (basement bathroom addition $10,000–$15,000; basement half-bath location $9,000–$15,000; belowground plumbing needs a sewage ejector, upflushing toilet or pressure-assisted model) and Angi's half bathroom addition guide, updated Oct 16, 2026 (national average $6,500, most $4,500–$12,000; basement half-bath location $9,000–$15,000; permits $125–$600), HomeGuide's basement bathroom cost guide (conversion $200–$250 per sq ft, $3,000–$12,500 for 15–50 sq ft; small half bath $3,000–$5,000, 3/4 bath $5,000–$10,000, medium full bath $8,000–$12,500, large full bath $10,000–$25,000; ejector pump an extra $2,000–$5,500; rough-in plumbing $450–$1,800; toilet $350–$800, sink and faucet $580–$2,000, shower $1,000–$15,000, exhaust fan $250–$950, wiring $200–$850+; build time 2–5 weeks) and Block Renovation's basement bathroom cost guide (half bath $4,000–$12,000, 3/4 bath $7,000–$20,000, full bath $12,000–$30,000; pump +$2,000–$5,500 where the basement sits below the sewer line). Sources last checked: October 2026 — HomeGuide, Angi. How we calculate these costs
Cost by scope

| Scope | Typical cost | What it includes |
|---|---|---|
| Half bath on an existing rough-in — the budget route | $4,000 – $9,000 | The cheap end: Block Renovation prices a basement half bath at $4,000–$12,000 and HomeGuide prices a small half bath conversion at $3,000–$5,000 — toilet and sink only, on drains already in the slab, which is why it prices below a full bath; Angi's basement half-bath location band of $9,000–$15,000 sits at the top of this tier and is published as the higher-scope difference, not blended |
| Standard full bath — the typical job | $10,000 – $18,000 | The shared band itself: Angi prices a basement bathroom addition at $10,000–$15,000, HomeGuide prices a medium full bath conversion at $8,000–$12,500, and Block Renovation prices a full bath at $12,000–$30,000 — toilet, sink and shower in about 40–50 sq ft of existing space, which is the common job and the band this page is built on |
| Full bath, no rough-in, ejector pump — the top end | $18,000 – $30,000 | The expensive end: Block Renovation prices a full bath to $30,000, and both HomeGuide and Block price an ejector pump at an extra $2,000–$5,500 where the basement sits below the sewer line — slab cutting, a sewage ejector, longer pipe runs and a tile shower are what push a job past the standard band |
Where the money goes
| Part of the job | Share | Note |
|---|---|---|
| Plumbing and drainage | 35–50% of total | The largest portion and the basement-specific line: HomeGuide prices rough-in plumbing at $450–$1,800 where stubs exist, an ejector pump at an extra $2,000–$5,500, and notes that breaking concrete for new drains is the cost that separates a rough-in job from a from-scratch job |
| Fixtures (toilet, sink, shower) | 20–30% of total | The visible hardware: HomeGuide prices toilet installation at $350–$800, sink and faucet at $580–$2,000, a shower at $1,000–$15,000 and a bathtub at $1,200–$6,600 — the shower or tub choice is what moves this line most |
| Tile and finishes | 15–25% of total | The surfaces: HomeGuide prices tile flooring at $220–$2,500 and a countertop and vanity at $400–$4,000 — standard ceramic and a stock vanity sit at the bottom, natural stone and custom cabinetry at the top |
| Electrical, ventilation and permits | 10–15% of total | The code lines: HomeGuide prices electrical wiring at $200–$850 or more, an exhaust fan at $250–$950 and light fixtures at $100–$300 each, and a basement bath almost always needs building, plumbing and electrical permits with separate inspections |

What moves the price most
Whether a rough-in exists is the first driver: HomeGuide notes that pipes and drains already in the slab cut the job dramatically, and both HomeGuide and Block Renovation price the alternative — cutting the slab and adding an ejector pump — at $2,000–$5,500 for the pump alone, before the trenching. Height against the sewer line is second: Angi stresses that belowground plumbing cannot rely on gravity, so a basement below the main sewer line needs a sewage ejector, an upflushing toilet or a pressure-assisted model, each with its own price and maintenance. Fixture count is third: HomeGuide's size table runs from a small half bath at $3,000–$5,000 through a 3/4 bath at $5,000–$10,000 to a medium full bath at $8,000–$12,500, because every added fixture is another drain, supply and vent. Finally, waterproofing and location close the bill: HomeGuide prices basement waterproofing at $6,000–$18,000 where it is needed, and Angi notes that putting the bath directly below an existing upstairs bathroom simplifies the pipe runs and cuts material costs — the cheapest basement bath is usually the one stacked under the plumbing that is already there.
Costs in your city
Labor is the biggest variable in any remodel, and labor is local — the same bathroom can price very differently in Houston than in Boston. We are adding city editions metro by metro, each with its own labor index, permit notes and climate factors, written for that city rather than copied from this page. Wave 1: Houston, Dallas–Fort Worth, Phoenix, Atlanta, Miami–South Florida, Orlando, Tampa, Charlotte, Austin and San Antonio. Until your city's page is live, use the national range here and weight it the way contractors do: Sun Belt labor often prices near or below the national middle, while coastal California and the Northeast metros often price well above it.

Frequently asked questions
How much does it cost to add a bathroom to a basement?
Most standard full baths land in the $10,000–$18,000 band on this page, with a common middle around $12,500 — the midpoint of Angi's $10,000–$15,000 band. A half bath on an existing rough-in can come in below that band, and a full bath with no rough-in and an ejector pump usually lands above it.
Can I add a basement bathroom without breaking concrete?
Yes, with an above-floor system: both Angi and HomeGuide note that an upflush (macerating) toilet system sits on the slab and pumps waste up to the drain, avoiding the trench. It suits a powder room best, is noisier than a gravity drain, and has a motor that needs occasional service.
Do I need a sewage ejector pump for a basement bathroom?
Usually, if the basement floor sits below the home's main sewer line — which most do: HomeGuide and Block Renovation both price an ejector pump at an extra $2,000–$5,500. If the bath sits above the sewer line or on an existing rough-in with gravity drainage, the pump line drops out of the quote.
How long does a basement bathroom addition take?
HomeGuide puts the build at 2–5 weeks depending on complexity, labor and permitting timelines. Slab cutting, inspections and tile curing create natural pauses, and a quote that skips the permit and inspection steps is not a faster job — it is an unfinished one.
Does a basement bathroom need permits?
Yes, almost always: a basement bath runs waste lines, water supply and wiring in a damp space, so most codes require building, plumbing and electrical permits plus separate underground, rough-in and final inspections. HomeGuide also flags radon testing at $10–$400 and waterproofing at $6,000–$18,000 where the basement needs it.






