Pantry Installation cost at a glance
- Typical range: $1,100 – $2,900
- Most homeowners pay: around $2,000
- Per square foot: $20–$40 per sq ft
- Prices vary most by: Shelving and cabinetry (35–50% of the budget)
Cross-checked against three published sources for this project. Sources used for this page: Angi's custom pantry cost guide (2026, updated October 27, 2026: national average $2,000, most $1,100–$2,900; reach-in $250–$1,500 at about 5 by 2 feet, small walk-in $750–$2,000 at about 5 by 5 feet, large walk-in $2,000–$3,500 at about 100 square feet; $20–$40 per square foot; size table 10 sq ft $200–$400, 30 sq ft $600–$1,200, 50 sq ft $1,000–$2,000; general contractor labor about $20 per square foot; electrician $6–$8 per square foot; wall removal $300–$1,000 for a non-load-bearing wall, extension beyond existing walls $5,000 or more; plywood shelving $400–$750; premade stock cabinets $100–$300 per linear foot installed; light fixture $160–$1,000; permits $400–$2,200; cabinet maker $35–$100 per hour, kitchen designer $65–$250 per hour; remodel components shelving $400–$750, cabinets $100–$300 per linear foot, countertops $1,850–$4,350, backsplash $15–$40 per square foot, flooring $12.50 per square foot, painting $2.75 per square foot; return on investment 50–75%; National Association of Home Builders reporting that 83% of buyers wanted a walk-in pantry; shelf depth no more than 12 inches, 15–18 inches for larger walk-ins), HomeGuide's cabinet installation cost guide (pantry cabinets $1,000–$5,000 installed; stock cabinets $100–$400 per linear foot, semi-custom $150–$700, custom $500–$1,200; installation labor $40–$80 per hour or $50–$300 per linear foot; kitchen remodeling permits $500–$1,500; cabinet removal $15–$20 per linear foot or $300–$600) and Fixr's custom cabinets installation cost data (custom pantry cabinet $2,000–$8,000; pantry tower $1,000–$5,000). Sources last checked: October 2026 — HomeGuide, Fixr, Angi. How we calculate these costs
Cost by scope

| Scope | Typical cost | What it includes |
|---|---|---|
| Reach-in pantry — shelves and doors in an existing closet or niche | $250 – $1,500 | The cheap end: Angi prices a reach-in pantry at $250–$1,500, typically 5 feet wide by 2 feet deep, with plywood or wire shelving at $400–$750 — the practical choice where a walk-in will not fit |
| Standard pantry — a small walk-in or a full cabinet build | $1,100 – $2,900 | The shared band itself: Angi's $1,100–$2,900 band with its $2,000 average, inside HomeGuide's $1,000–$5,000 pantry-cabinet band, covering shelving or stock cabinets, lighting and finish for a typical kitchen pantry |
| Large walk-in with custom cabinetry — around 100 sq ft with premium storage | $2,000 – $5,000 | The expensive end: Angi prices a large walk-in at $2,000–$3,500 and HomeGuide prices custom pantry cabinets at $1,000–$5,000, while Fixr prices a large custom pantry cabinet at $2,000–$8,000 — a sink, countertop or wine storage pushes past this tier |
Where the money goes
| Part of the job | Share | Note |
|---|---|---|
| Shelving and cabinetry | 35–50% of total | Angi prices plywood shelving at $400–$750 and premade stock cabinets at $100–$300 per linear foot installed, against HomeGuide's stock $100–$400, semi-custom $150–$700 and custom $500–$1,200 per linear foot — Fixr prices a custom pantry cabinet at $2,000–$8,000 and a pantry tower at $1,000–$5,000 |
| Labor — carpentry and installation | 25–40% of total | Angi prices a general contractor or handyperson at about $20 per square foot in labor, roughly $1,000 for a 50-square-foot room, and a cabinet maker at $35–$100 per hour, while HomeGuide prices cabinet installation labor at $40–$80 per hour or $50–$300 per linear foot |
| Walls, drywall and electrical | 15–25% of total | Angi prices removing a non-load-bearing wall at $300–$1,000, extending beyond existing walls at $5,000 or more, wiring at $6–$8 per square foot and a light fixture at $160–$1,000 — a pantry in an already-wired space skips most of this line |
| Doors, lighting, hardware and finishing | 5–15% of total | Angi prices lighting at $160–$1,000 for a fixture and $500–$2,000 or more for a remodel's lighting package, with permits at $400–$2,200 where load-bearing wall work is involved — HomeGuide prices kitchen remodeling permits lower, at $500–$1,500, and the two permit bands are published side by side, not blended |

What moves the price most
Pantry type is the first driver: Angi prices a reach-in at $250–$1,500, a small walk-in at $750–$2,000 and a large walk-in at $2,000–$3,500, so the room's shape sets the band before any finish is chosen. Size is second: Angi prices a pantry at $20–$40 per square foot, with its size table running $200–$400 for 10 square feet, $600–$1,200 for 30 and $1,000–$2,000 for 50 — every extra wall of shelving is another run of material and labor. Cabinetry grade is third: Angi prices stock cabinets at $100–$300 per linear foot installed against HomeGuide's semi-custom $150–$700 and custom $500–$1,200, and Fixr prices a large custom pantry cabinet at $2,000–$8,000, so the cabinet decision alone can double the job. Wall and electrical work is fourth: removing a non-load-bearing wall costs $300–$1,000 on Angi's figures but extending beyond existing walls adds $5,000 or more, and wiring adds $6–$8 per square foot. Extras close the bill: Angi's remodel component list prices a countertop at $1,850–$4,350, a backsplash at $15–$40 per square foot, flooring at $12.50 per square foot and painting at $2.75 per square foot — a pantry that doubles as a prep station is priced as a small kitchen, not a closet.
Costs in your city
Labor is the biggest variable in any remodel, and labor is local — the same bathroom can price very differently in Houston than in Boston. We are adding city editions metro by metro, each with its own labor index, permit notes and climate factors, written for that city rather than copied from this page. Wave 1: Houston, Dallas–Fort Worth, Phoenix, Atlanta, Miami–South Florida, Orlando, Tampa, Charlotte, Austin and San Antonio. Until your city's page is live, use the national range here and weight it the way contractors do: Sun Belt labor often prices near or below the national middle, while coastal California and the Northeast metros often price well above it.

Frequently asked questions
How much does pantry installation cost?
Typically $1,100–$2,900, with about $2,000 the most-pay figure. Angi puts the national average for building a custom pantry at $2,000 with most homeowners spending $1,100–$2,900, HomeGuide prices pantry cabinets at $1,000–$5,000 installed, and Fixr prices a custom pantry cabinet at $2,000–$8,000 — the three sources agree on this page's band.
What is the difference between a reach-in and a walk-in pantry?
Size and price: Angi prices a reach-in pantry at $250–$1,500, typically 5 feet wide by 2 feet deep, a small walk-in at $750–$2,000 at around 5 by 5 feet, and a large walk-in at $2,000–$3,500 at around 100 square feet. A reach-in suits a small kitchen; a walk-in suits a household that buys in bulk or wants a prep counter inside the pantry.
How deep should pantry shelves be?
Angi advises shelves no more than 12 inches deep, because anything deeper hides items at the back, with 15- to 18-inch shelving reserved for larger walk-ins holding appliances and cookware. Shallow shelves with clear containers beat deep shelves for finding what is actually in the pantry.
Do I need a permit to build a pantry?
Only where walls or wiring change structurally: Angi prices building permits at $400–$2,200 where load-bearing wall work is involved, while HomeGuide prices kitchen remodeling permits at $500–$1,500. A pantry fitted into an existing closet with no wall removal and no new wiring usually needs no permit.
Does a pantry add value to a home?
Angi puts the return on investment at 50–75% and cites National Association of Home Builders reporting that 83% of home buyers wanted a walk-in pantry — storage is one of the few kitchen features buyers consistently ask for, which is why a well-built pantry holds its value better than a purely decorative upgrade.






