Home › Cost Guides › Stump Grinding
Cost Guide

How Much Does Stump Grinding Cost? (2026)

By Ahsan ul Haq · Last updated: 11 November 2026 · Planning estimate — not a quote · How we estimate

Typical range
$140 – $400
Most homeowners pay around $260 · The typical project is grinding one average yard stump — about 24 inches across — down 4 to 6 inches below grade and leaving the chips in the hole, at $2 – $6 per inch of diameter in HomeGuide. Small stumps, extra stumps at the same visit and oversize hardwood stumps are tiered separately below; full stump excavation and root removal are different work, priced on the tree-removal page and in the FAQs.
typical
$140$400
Low end = minor scope  ·  marker = typical middle  ·  high end = major scope. Add 10–20% contingency to any budget.
Fresh tree stumps in a cleared pine forest, cut trunks and brush between standing trees

Stump Grinding cost at a glance

  • Typical range: $140 – $400
  • Most homeowners pay: around $260
  • Prices vary most by: Grinding labor & machine time (50–65% of the budget)

Cross-checked against two published sources for this project. Sources used for this page: the Angi stump removal cost guide, HomeGuide's stump grinding cost guide and Lawn Love's stump removal cost data. Sources last checked: October 2026 — HomeGuide, Angi. How we calculate these costs

Cost by scope

Stump Grinding cost ranges by scope — chart of the table below
ScopeTypical costWhat it includes
Small stump up to 12 inches, easy access$80 – $160The floor of the market is the minimum visit fee — HomeGuide puts minimums at $80–$160 and its diameter table prices a stump up to 12 inches at $30–$70 of grinding inside that minimum. A young or softwood stump the grinder can reach through a gate is this tier.
One average stump, about 24 inches — the typical job$140 – $400The typical project on this page. HomeGuide prices the first stump at $120–$400; Angi prices stump grinding at $150–$500 with a professional average near $320; Lawn Love puts grinding at $140–$450 with a $295 average. Diameter, not height, is the meter — every dataset prices the widest cut at ground level.
Extra-large or hardwood stump, deep grind or several stumps$300 – $800HomeGuide prices extra-large stumps at $300–$800 each, and deep grinding toward 18 inches for replanting costs more again. The saving grace of a multi-stump visit is the rate for each additional stump — $30–$60 in HomeGuide — because the machine and the trip are already paid for.

Where the money goes

Part of the jobShareNote
Grinding labor & machine time50–65%The grinder, its teeth and the operator are the product — HomeGuide prices the work at $100–$200 an hour, and hardwood, root flare and buried rock all spend that time faster
Travel & minimum-visit economics15–25%The trip to you and the $80–$160 minimum fee in HomeGuide — the reason one small stump costs closer to $150 than to the $30–$70 its diameter alone suggests
Chip handling & cleanup8–18%Raking out and levelling the grindings, or hauling them away — HomeGuide prices debris removal at an extra $2–$4 per inch of diameter when it is charged separately
Backfill & surface finish3–10%Topsoil, seed or sod over the settled hole when the quote includes it — sod runs $1–$2 per square foot in HomeGuide, and many grinding quotes stop at the chips
Grinding labor & machine time · 50–65%Travel & minimum-visit economics · 15–25%Chip handling & cleanup · 8–18%Backfill & surface finish · 3–10%
Estimator’s note: on stump grinding, grinding labor & machine time is usually where quotes swing most (50–65% of a typical budget). Ask every contractor to itemize that line in writing — totals are only comparable when that part is.
An old hardwood stump like this one grinds slowly — species and age set the machine time, which is why the same diameter quotes differently from stump to stump.
An old hardwood stump like this one grinds slowly — species and age set the machine time, which is why the same diameter quotes differently from stump to stump.

What moves the price most

Diameter is the price. HomeGuide charges $2–$6 per inch and Angi $2–$5 per inch, measured across the widest part of the stump at ground level including the root flare — a 36-inch stump is not three times a 12-inch quote, it is a bigger machine for longer. Species and age set the machine time: old oak and maple grind slowly, young pine and rotted stumps quickly, which is why the same diameter quotes differently. Count is the discount: HomeGuide prices each additional stump at $30–$60 against $120–$400 for the first, so a yard with four stumps should never be quoted as four separate visits. Depth is a decision — the standard 4–6 inches below grade in HomeGuide is enough for grass; grinding to 18 inches for a new tree or a patio base is a different, pricier pass. Access and underground lines gate the job: a stump behind a narrow gate takes a smaller grinder, and a responsible crew locates utilities before the teeth spin.

Work out your quantities: before you compare quotes, run your measurements through our free remodeling calculators (paint, tile, concrete and flooring) — each one shows its formula and runs entirely in your browser.

Worked example: how a typical stump grinding budget breaks down

Take the typical job — one 24-inch oak stump in a back lawn, ground 6 inches below grade, chips raked level into the hole and the yard left tidy. Here is a realistic $260 version of that invoice: The budget below totals $260 — the "most homeowners pay around" figure from the top of this page — split using this page's own cost breakdown. It shows how a real quote at that level is usually composed; every line is built from the ranges on this page, and it is an illustration, not a quote for your project.

Line itemExample budget
Grinding the stump & main root flare$150
Chip raking, levelling & site cleanup$60
Travel & minimum-visit balance$50
Total$260

What most people get wrong

  • Measuring the cut face instead of the flare. Quotes are priced per inch at $2–$6 in HomeGuide across the widest ground-level width — a stump measured at the neat top cut is under-measured, and the difference is renegotiated in your yard.
  • Paying a first-stump price for every stump. Additional stumps run $30–$60 each in HomeGuide once the machine is on site; a quote that multiplies the first-stump rate by the stump count is a quote to refuse.
  • Assuming the chips disappear. Grinding leaves a mound of chips and soil that settles for weeks — hauling it away is an extra $2–$4 per inch in HomeGuide, and topsoil and seed are extra again unless the quote names them.
  • Renting a grinder for a single stump. Rental runs $100–$400 a day in HomeGuide, the same money as the professional job, with the risk transferred to you.

Costs in your city

Stump grinding follows tree-crew day rates and disposal rules, and both are local. HomeGuide's $100–$200 hourly band runs widest where tree work is seasonal — storm regions pay a premium in the months after hurricane and ice damage, when every grinder in the county is booked on removal work first. Cities with protected-tree permits fold the stump into the removal permit at $75–$450 in HomeGuide, and tight urban lots pay for the smaller grinder that fits the gate rather than the faster one that does not. The constant everywhere is the meter: diameter at ground level. Measure yours, flare included, before the first call and every quote you collect is pricing the same stump.

How we got these numbers

Cross-checked against the Angi stump removal cost guide (grinding $150–$500, $2–$5 per inch, professional average near $320), HomeGuide's stump grinding cost guide — opened and read in full this run ($120–$400 for the first stump, $30–$60 per additional stump, $2–$6 per inch, minimums $80–$160) and Lawn Love's stump removal cost data (grinding $140–$450, average $295). Where the three disagree, this page publishes the overlap and says so.

Measure the widest cut at ground level, root flare included — that diameter, at $2–$6 per inch in HomeGuide, is the number every grinding quote is built from.
Measure the widest cut at ground level, root flare included — that diameter, at $2–$6 per inch in HomeGuide, is the number every grinding quote is built from.

Frequently asked questions

How much does stump grinding cost on average?

HomeGuide prices the first stump at $120–$400, Lawn Love averages $295 inside $140–$450, and Angi puts a professional grinding job at $150–$500 with an average near $320. Budget about $260 for one average 24-inch yard stump ground below grade.

How much does stump grinding cost per inch?

HomeGuide charges $2–$6 per inch of diameter and Angi $2–$5 per inch. The measurement is the widest cut at ground level, root flare included — measure before you call and every quote you get is pricing the same stump.

How much does it cost to grind multiple stumps?

Far less per stump. HomeGuide prices each additional stump at $30–$60 once the first is paid at $120–$400, because the machine, the crew and the trip are already on site. Five stumps in one visit commonly cost less than two separate visits.

Is it cheaper to rent a stump grinder and do it myself?

Rarely for one stump. HomeGuide puts grinder rental at $100–$400 a day — the same money as hiring the job out at the typical $140–$400 — and the rental still leaves you operating the most unforgiving machine in the yard. Rental only wins across many stumps.

Does stump grinding remove the roots too?

No. Grinding takes the stump 4–6 inches below grade on a standard pass in HomeGuide; the lateral roots stay and decay over years. Full excavation is a different method — Angi prices manual removal at $200–$700 — and is only worth it where you plan to build or plant a new tree in the exact spot.

Before you sign: Diameter, depth, chips — a fair grinding quote names all three, and the $260 middle of the market is one average stump, ground below grade in a single visit.

Ahsan ul Haq — Editor, Remodel Cost Hub

Ahsan compiles and edits the cost guides on Remodel Cost Hub, cross-checking every range against at least three published sources before it is published — the full method is on our Methodology page. Spot an error on this page? Send a correction.

Stump Grinding cost range graphic
Save this range for later: Pin it on Pinterest

Related cost guides

Person clearing a snow-covered driveway with a snowblower during a storm, houses and cars under snow

Snow Removal Cost

$50 – $200

The typical project on this page is one professional visit clearing a standard residential driveway and the front walk after a storm — plowed, blown or shovelled, with the apron cleared of the street plow ridge. Seasonal contracts, long or steep driveways and roof snow are tiered separately below; every price here is per visit unless the tier says season, because snow is bought both ways and confusing the two is how quotes mislead.

Worker using a leaf blower to clear leaves in a park setting

Leaf Removal Cost

$190 – $590

The typical project is one professional fall cleanup visit on a standard residential yard — leaves blown or raked off the lawn and beds, gathered, bagged or hauled, and the hard surfaces blown clean at the end. Large and heavily wooded lots are tiered separately below; gutter cleaning is a different service, priced on the gutter-cleaning page, never folded into a leaf visit.

Worker cleaning a swimming pool with a long pole

Pool Cleaning Cost

$80 – $200

The typical project on this page is one month of recurring professional pool cleaning — weekly or biweekly visits that skim, brush and vacuum the pool, empty the baskets, test the water and balance the chemicals, priced per month. A first-time or one-time deep clean and seasonal opening and closing are tiered separately below; pool repairs and a full pool installation are different work, priced elsewhere on this site.

Red lawn mower cutting grass in a green garden, leaving a visible cut path

Lawn Mowing Cost

$50 – $85

The typical project is one professional mowing visit on a standard residential lawn of about 1/4 acre — mowed, trimmed around beds and fences, edged and blown clean, priced per visit. One-time and overgrown cuts are tiered separately below; fertilising, aeration and leaf removal are different services with their own pages on this site, never folded into a mow.

Worker rolling freshly laid sod with a lawn roller in a suburban backyard beside a patio and pool

Sod Installation Cost

$2,000 – $4,000

The typical project is a new sod lawn of about 2,000 sq ft laid on bare, level dirt with basic prep — sod, delivery, light levelling, laying and the first watering, at about $1 – $2 per sq ft installed. Removing an old lawn and regrading or topsoil work are tiered separately below; a 1/5-acre lawn is a far bigger job (HomeGuide prices it at $8,700–$17,400) and is never inside this band.

Woman shovelling mulch from a large bulk pile into an orange wheelbarrow outdoors

Mulch Installation Cost

$150 – $400

The typical project is 3 cubic yards of bark mulch delivered and professionally installed in existing beds — about 324 sq ft at a 3-inch depth — at $50 – $150 per cubic yard installed across the guides. A top-off refresh and premium cedar or blown-in work are tiered separately below; old-mulch removal, weed fabric and edging are add-ons, never inside the typical band.