Shower Door Installation cost at a glance
- Typical range: $600 – $1,400
- Most homeowners pay: around $950
- Prices vary most by: The door & glass (50–60% of the budget)
Cross-checked against three published sources for this project. Sources used for this page: Angi's shower door installation cost guide, HomeGuide's glass shower door cost guide and Fixr's shower door cost data. Sources last checked: October 2026 — HomeGuide, Fixr, Angi. Last updated October 2026 · How we calculate these costs
Cost by scope
| Scope | Typical cost | What it includes |
|---|---|---|
| Framed door on a standard opening | $400 – $1,100 | The budget end: HomeGuide prices a framed door installed at $400–$1,100 and Angi at $600–$1,200 — a stock-size door in a metal frame fitted to an existing, square opening, with the curb and walls untouched |
| Standard semi-frameless door — the typical job | $600 – $1,400 | The typical band on this page: Angi puts most shower door projects at $530–$1,390 with a $958 average, and This Old House publishes the same most-projects band around a $959 average — thicker glass, minimal frame, standard sizes |
| Frameless, oversized or custom enclosure | $1,400 – $3,300 | HomeGuide prices custom doors at $1,400–$3,300 with standard frameless at $600–$1,900, and Fixr runs frameless work at $900–$2,300 as an added cost — heavy glass, templated measuring and heavier hardware are the spend at this tier |
Where the money goes
| Part of the job | Share | Note |
|---|---|---|
| The door & glass | 50–60% of total | The door itself is the largest line: glass alone runs $12–$50 per sq ft in HomeGuide, and thickness is the multiplier — frameless doors use heavier 3/8 to 1/2 inch glass that costs more to buy, cut, drill and handle than a framed door’s thinner panel |
| Installation labor | 25–35% | HomeGuide prices labor at $150–$550 for a framed door and $200–$600 for frameless work; installers charge $50–$100 per hour in This Old House with flat rates from $200, and heavy frameless panels are a two-installer job |
| Hardware, hinges, seals & channel | 8–15% | The frame or the clips, hinges, handle, sweep and seals: This Old House prices hardware at $75–$250, and frameless hardware is heavier and dearer than a framed door’s channel and rollers |
| Measuring, delivery & old-door removal | 3–8% | Templating, delivery, taking the old door or curtain hardware out and disposing of it: Angi folds permits, delivery and disposal into a $150–$200 extras line, and a mis-measured custom panel is the one cost nobody refunds |
What moves the price most
Frame style is the shower door budget. A framed door hangs thinner glass in a metal frame and forgives an opening that is slightly out of square: HomeGuide prices it at $400–$1,100 installed and Angi at $600–$1,200. A frameless door is heavier glass held by clips and hinges, measured to the opening by template: HomeGuide prices standard frameless at $600–$1,900 and custom work at $1,400–$3,300, while Angi’s wider frameless band of $1,100–$5,000 includes full enclosures. Size is the second lever: glass prices at $12–$50 per sq ft in HomeGuide, Angi prices oversized doors at $1,000–$1,600 and double doors at $1,200–$2,200, so width is bought by the square foot, not by the door. Door style is the third: Angi prices sliding and bypass doors at $700–$2,000 and pivot doors at $800–$1,400 — sliders suit wide alcoves, pivots suit narrow ones, and each carries its own hardware. Finally, the opening decides the surprise line: walls out of plumb are shimmed or the glass is cut to the taper, permits run $50–$200 where they apply in This Old House, and both are found by measuring, which is why a templated quote is firmer than a phone quote for this job.
Worked example: how a typical shower door installation budget breaks down
A typical job: one standard semi-frameless hinged door fitted to an existing tiled alcove opening — the opening measured and templated, the door supplied and hung, sweeps and seals fitted, and the old curtain hardware removed. The budget below totals $950 — the "most homeowners pay around" figure from the top of this page — split using this page's own cost breakdown. It shows how a real quote at that level is usually composed; every line is built from the ranges on this page, and it is an illustration, not a quote for your project.
| Line item | Example budget |
|---|---|
| Glass door unit (standard semi-frameless) | $520 |
| Installation labor | $260 |
| Hardware, hinges and seals | $105 |
| Measuring, delivery and old-door removal | $65 |
| Total | $950 |
What most people get wrong
- Ordering the door before the opening is templated — glass is cut and drilled to the measured opening, and a stock size forced into a tapered alcove is a leak with a handle.
- Assuming the walls are plumb because the tile looks straight — out-of-plumb walls are the normal finding, and the quote should say whether the glass is cut to the taper or the wall is corrected.
- Comparing quotes without the glass thickness — a frameless quote on 1/4-inch glass and one on 3/8-inch glass are not the same door, and the thinner panel flexes on its hinges.
- Keeping the old sweep and seals on a door swap — the seals are the wear part of the door and a small line; reusing them is how a new door leaks like the old one.
Costs in your city
Shower door pricing follows installer rates and how much frameless work a market supports — This Old House puts installers at $50–$100 per hour, and metros with few glass specialists price frameless templating at the top of it. Housing age travels with the city: older stock brings openings that are out of plumb and curbs that are not level, which adds the shimming and taper-cutting time that a new-build bathroom never sees. Permits, where they apply at all, run $50–$200 in This Old House. The pattern everywhere is that the door itself ships nationally at one price — it is the measuring, fitting and return visits that are local. Ask each bidder whether templating is included, what glass thickness the quote assumes, and who pays if a panel arrives wrong.
Frequently asked questions
How much does it cost to install a glass shower door?
About $600–$1,400 is the typical band on this page for one standard door supplied and installed, with most projects landing around $950. Angi averages $958 with most projects at $530–$1,390, This Old House averages $959 on the same band, and HomeGuide’s framed-to-frameless ladder brackets it on both sides.
How much does a frameless shower door cost?
HomeGuide prices a standard frameless door at $600–$1,900 installed and custom work at $1,400–$3,300; Fixr runs frameless at $900–$2,300 as an added cost, and Angi’s $1,100–$5,000 band includes full enclosures. The premium buys thicker glass, templated measuring and heavy hinges — not a different door.
How much is labor to install a shower door?
HomeGuide prices labor at $150–$550 for a framed door and $200–$600 for frameless work. This Old House puts installers at $50–$100 per hour with flat rates from $200, and Angi notes extras such as permits, delivery and disposal at $150–$200 on top.
Is a framed or frameless shower door better value?
Framed is the value buy: $400–$1,100 in HomeGuide against $600–$1,900 for standard frameless, and the frame forgives an opening that is not perfectly square. Frameless earns its premium in looks and in glass thickness, but every measurement has to be right, because drilled glass cannot be trimmed on site.
Can I install a shower door myself?
A stock framed kit on a square opening is a realistic DIY job, and the saving is the labor line — $150–$600 in HomeGuide. The honest limits: frameless panels are heavy, need two people and exact templating, and a panel measured a quarter-inch wrong is a reorder, not an adjustment.
